Q15 墙体材料 标准查询与下载

ASTM C62-04a 砌砖(用粘土或页岩制实心砌块)标准规范

1.1 This specification covers brick intended for both structural and nonstructural masonry where external appearance is not a requirement. The brick are prismatic units available in a variety of sizes, shapes, textures, and colors. The specification does not cover brick intended for use as facing units or where surface appearance is a requirement, (see Specification C 216). This specification does not cover brick intended for use as paving brick (see Specification C 902).1.2 The property requirements of this standard apply at the time of purchase. The use of results from testing of brick extracted from masonry structures for determining conformance or nonconformance to the property requirements (Section ) of this standard is beyond the scope of this standard.1.3 Brick are manufactured from clay, shale, or similar naturally occurring earthy substances and subjected to a heat treatment at elevated temperatures (firing). The heat treatment must develop sufficient fired bond between the particulate constituents to provide the strength and durability requirements of this specification. (See firing, fired bond, and incipient fusion in Terminology C 43.)1.4 Brick are shaped during manufacture by molding, pressing, or extrusion, and the shaping method is a way to describe the brick (see Terminology C 43).1.5 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.1.6 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale)

ASTM C1372-04e2 部分挡土墙砌块的标准规范

1.1 This specification covers dry-cast segmental retaining wall units of concrete, machine-made from hydraulic cement, water, and suitable mineral aggregates with or without the inclusion of other materials. The units are intended for use in the construction of mortarless segmental retaining walls.Note 1When particular features are desired, such as weight classification, higher compressive strength, surface texture, finish, color, or other special features, such properties should be specified separately by the purchaser. Local suppliers should be consulted as to availability of units having the desired features.1.2 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

Standard Specification for Dry-Cast Segmental Retaining Wall Units

ASTM F1700-04(2010) 实心乙烯基楼板砖标准规范

1.1 This specification covers solid vinyl floor tiles that are monolithic, surface decorated or printed, and that have binder contents referenced in Table 1. 1.2 This type of floor covering is intended for use in commercial, light commercial, and residential buildings. General information and performance characteristics which determine serviceability and recommended use are included in this specification. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Standard Specification for Solid Vinyl Floor Tile

DIN 18503:2003 铺路用缸砖.要求和试验方法

Clinker bricks for paving - Requirements and test methods

BS PAS 70:2003 HD粘土砖.外观和现场测量尺寸和公差指南

This Publicly Available Specification gives guidance on assessing the appearance of facing bricks,and the determination of on-site measurements of work size dimenssions,for all high density (HD)type clay bricks as defined by BS EN771-1. It includes a procedure for comparing sample panels with reference panels in order to assess the appearance acceptability of consignments of clay facing dricks.It is not intended to apply to common and engineering HD type clay bricks. It also provides a method of determining the overall dimensions of all clay bricks.The limits for the tolerance categories for the mean and range are those that apply to HD type clay bricks where the manufacturer's declared work sizes are those traditionally known as Brithish Standard dimensions (UK standard format clay bricks).If clay bricks are supplied with other work sizes,the limits for these categories will need to be calculated in accordance with BS EN 771-1.

HD clay bricks - Guide to appearance and site measured dimensions and tolerance

BS EN 771-2:2003 砌块规范.硅酸钙砌块

This document specifies the characteristics and performance requirements of calcium silicate masonry units for which the main intended uses are inner walls, outer walls, cellars, foundations and external chimneymasonry. This document is intended to apply to all calcium silicate masonry units, including those of an overall nonrectangular parallelepiped shape, specially shaped and accessory units. It defines the performance related to e.g. strength, density and dimensional accuracy, measured according to the corresponding test methods contained in separate European Standards. It provides for the evaluation of conformity of the product to this European Standard. The marking requirement for products covered by this document is also included. This document does not specify standard sizes for calcium silicate masonry units, nor standard work dimensions and angles of specially shaped and accessory units. It does not cover units with more than 60 % volume of voids, nor products made from shale as a major raw material. It does not cover storey height panels. It does not cover units intended for use as a damp proof course, nor units with an incorporated thermal insulation material bonded to the faces of the unit susceptible to be exposed to fire nor chimney flue units.

Specification for masonry units - Calcium silicate masonry units

NY/T 671-2003 混凝土普通砖和装饰砖

Concrete common bricks and decorative bricks

DIN EN 13101:2003 地下人行通道入口阶梯.要求、标记、试验和合格评定

The document specifies general requirements and testing methods for steps manufactured from iron, steel or aluminium, for use in manholes and other man entry chambers as a means of access. The project specifies the performance criteria for the mechanical stability and resistance providing protection against falling. The project includes the corresponding test methods and the evaluation of conformity of the product to this Standard.

Steps for underground man entry chambers - Requirements, marking, testing and evaluation of conformity; German version EN 13101:2002

JIS A 5440:2003 火山硅酸盐纤维增强多层板

この規格は，主として建築物の内外壁下地，床下地，屋根下地，CAフロアーなどに用いる建築用ボードで，火山性ガラス質たい積物(シラス，白土，軽石など）の粒体及びそれらの発泡体をJIS A 9504の無機系繊維と複合し，有機系結合剤によって層状に成形した建築用ボード(以下,火山性ガラス質複層板という。)についで規定する。

Volcanic silicates fiber reinforced multi-layer board

ASTM C1197-03 用液压千斤顶法现场测量砖石建筑可变形性的标准试验方法

1.1 This test method describes an in situ method for determining the deformation properties of existing unreinforced solid-unit masonry. This test method concerns the measurement of in-situ masonry deformability properties in existing masonry by use of thin, bladder-like flatjack devices that are installed in saw cut mortar joints in the masonry wall. This test method provides a relatively non-destructive means of determining masonry properties.1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method

ASTM C1420-03 投入使用的成品砌块的选择、移动和送运的标准指南

1.1 This guide covers procedures to facilitate the process of selecting, removing, and shipping of manufactured masonry units that have been placed in usage and are intended for testing. This guide also covers procedures for reporting as part of this process.1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are provided for information purposes only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Selection, Removal, and Shipment of Manufactured Masonry Units Placed in Usage

ASTM C1283-03e1 安装粘土烟道内衬的标准实施规程

1.1 This practice covers the minimum requirements for installing clay flue lining for residential concrete or masonry chimneys.1.2 The values stated in inch-pound units are to be regarded as the standard. The values stated in parentheses are for informational purposes only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Installing Clay Flue Lining

ASTM C1196-03 用液压千斤顶现场测量实心砌块抗压应力的标准试验方法

1.1 This test method covers the determination of the average compressive stress in existing unreinforced solid-unit masonry. This test method concerns the measurement of in-situ compressive stress in existing masonry by use of thin, bladder-like flatjack devices that are installed in saw cut mortar joints in the masonry wall. This test method provides a relatively non-destructive means of determining masonry properties in place.1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack Measurements

ASTM C1372-03 局部挡土墙砌块的标准规范

1.1 This specification covers segmental retaining wall units of concrete, machine-made from portland cement, water, and suitable mineral aggregates with or without the inclusion of other materials. The units are intended for use in the construction of mortarless segmental retaining walls.Note 18212;When particular features are desired, such as weight classification, higher compressive strength, surface texture, finish, color, or other special features, such properties should be specified separately by the purchaser. Local suppliers should be consulted as to availability of units having the desired features.1.2 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

Standard Specification for Segmental Retaining Wall Units

ASTM C1420-03a 投入使用的成品砌块的选择、移动和送运的标准指南

1.1 This guide covers procedures to facilitate the process of selecting, removing, and shipping of manufactured masonry units that have been placed in usage and are intended for testing. This guide also covers procedures for reporting as part of this process.1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are provided for information purposes only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Selection, Removal, and Shipment of Manufactured Masonry Units Placed in Usage

ASTM C34-03 结构用粘土承重墙砖标准规范

1.1 This specification covers structural clay loading-bearing wall tile. Two grades of tile are covered, as follows:1.1.1 Grade LB舒Suitable for general use in masonry construction and adapted for use in masonry exposed to weathering, provided they meet the durability requirements for Grade SW of Specification C 216.1.1.2 Grade LB8212;Suitable for general use in masonry where not exposed to frost action, or for use in exposed masonry where protected with a facing of 3 in. (76.2 mm) or more of stone, brick, terra cotta, or other masonry.1.1.3 If tile having a particular color, texture, or finish are desired, these features shall be specified separately by the purchaser. Color of tile varies with the type of clay used and degree of burning; hence, it cannot be taken as indicative of classification until after it has been related to absorption and strength by actual tests.1.2 The property requirements of this standard apply at the time of purchase. The use of results from testing of tile extracted from masonry structures for determining conformance or non-conformance to the property requirements (Section ) of this standard is beyond the scope of this standard.1.3 Tile covered by this standard are manufactured from clay, shale, or similar naturally occurring substances and subjected to a heat treatment at elevated temperatures (firing). The heat treatment must develop sufficient fired bond between the particulate constituents to provide the strength and durability requirements of this specification. (See firing and fired bond in Terminology C43. 1.4 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.

Standard Specification for Structural Clay Load-Bearing Wall Tile

ASTM C1185-03 无石棉纤维水泥平面薄板、屋面板、侧墙面板和护墙板取样和试验用标准试验方法

1.1 These test methods cover sampling and testing of non-asbestos fiber-cement flat sheets, roofing shingles, siding shingles, and clapboards. These products may be smooth or surface textured. These test methods are utilized in evaluating products cited in Specifications C 1186, C 1225, C 1288, and C 1325.1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards

KS F 2274-2002 建筑用合成塑胶人工暴露测试方法

이 규격은 건축용 합성 수지재를 대상으로 한 실험실 광원(제논-아크 광원, 자외선 형광

Recommended practice for accelerated artificial exposure of plastics building materials

BS EN 13888:2002 磁砖用泥浆.定义和规范

This European Standard applies to ceramic tile grouts for internal and external tile installations on walls and floors. This standard gives the terminology concerning the products, working methods, application properties, etc., for ceramic tile grouts. This European Standard specifies the performance requirements for cementitious and reaction resin grouts for ceramic tiles. This European Standard does not contain criteria or recommendations for the design and installation of ceramic tiles. NOTE Ceramic tile grouts can also be used for other types of tiles (natural and agglomerated stones, etc.), where these do not adversely affect these materials.

Grouts for tiles - Definitions and specifications

BS EN 1052-3:2002 砖石工程的试验方法.起始剪切强度的测定

This European Standard specifies a method for determining the in plane initial shear strength of horizontal bed joints in masonry using a specimen tested in shear. Guidance is given on the preparation of the specimens, the conditioning required before testing, the testing machine, the method of test, the method of calculation and the contents of the test report.

Methods of test for masonry — Part 3: Determination of initial shear strength