Q25 绝热、吸声、轻质与防火材料 标准查询与下载
共找到 1626 条与 绝热、吸声、轻质与防火材料 相关的标准，共 109 页
本文件适用于采用后装拔出法进行结构混凝土抗压强度的检测。
Technical Regulations for Testing the Compressive Strength of Concrete by Post-installation Pull-out Method
- ICS
- 91.120.10
- CCS
- Q25
- 发布
- 2022-11-24
- 实施
- 2023-02-01
本文件适用于采用钻芯法进行结构混凝土抗压强度的检测。当需检测构件较多时，采用回弹法、超声回弹综合法、后装拔出法等与钻芯法综合检测，形成钻芯修正法，用钻芯法检测结果对其它检测方法测得结果进行修正，使检测结果更可靠，可减少对结构损害。
Technical Regulations for Testing the Compressive Strength of Concrete by Core Drilling Method
- ICS
- 91.120.10
- CCS
- Q25
- 发布
- 2022-11-24
- 实施
- 2023-02-01
本文件适用于采用回弹法进行结构混凝土抗压强度检测。
Technical Regulations for Testing the Compressive Strength of Concrete by Rebound Method
- ICS
- 91.120.10
- CCS
- Q25
- 发布
- 2022-11-24
- 实施
- 2023-02-01
本文件适用于采用贯入法进行砌筑砂浆抗压强度的检测。
Technical Regulations for Testing the Compressive Strength of Masonry Mortar by Penetration Method
- ICS
- 91.120.10
- CCS
- Q25
- 发布
- 2022-11-24
- 实施
- 2023-02-01
本文件适用于厚度为240 mm的砌体抗剪强度及砌筑砂浆抗压强度的检测，砌块材料为烧结普通砖、烧结多孔砖、混凝土普通砖、混凝土多孔砖或蒸压粉煤灰砖，砌块外形尺寸为240 mm×115 mm×53 mm或240 mm×115 mm×90 mm。
Technical Regulations for Testing the Shear Strength of Masonry and the Strength of Masonry Mortar by Core Drilling Method
- ICS
- 91.120.10
- CCS
- Q25
- 发布
- 2022-11-24
- 实施
- 2023-02-01
Treatment of asbestos in built buildings - Visual examination of treated surfaces after treatment of materials and products containing asbestos - Mission and methodology
- ICS
- 13.100
- CCS
- Q25
- 发布
- 2021-09-25
- 实施
- 2021-09-25
This European Standard specifies the equipment and procedure for determining the resistance to impact of design ETICS kits with renders.
Thermal insulation products for building applications - Determination of the resistance to impact of external thermal insulation composite systems (ETICS); German version EN 13497:2018+A1:2021
- ICS
- 91.100.60
- CCS
- Q25
- 发布
- 2021-03-00
- 实施
本标准规定了反射隔热金属板的术语和定义、分类、代号和标记、一般要求、技术要求、试验方法、检验规则、包装及标志、运输、贮存及质量说明书。
reflective heat-insulating sheet metal
- ICS
- 91.100.01
- CCS
- Q25
- 发布
- 2021-01-26
- 实施
- 2020-06-01
1.1?This practice covers the requirements for storing, handling, and application of cellulosic fiber insulating board products. 1.2?The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units tha
Standard Practice for Application of Cellulosic Fiber Insulating Board for Wall Sheathing
- ICS
- 91.100.60
- CCS
- Q25
- 发布
- 2021
- 实施
1.1?This specification covers the types, physical properties, and dimensions of unfaced, preformed rigid cellular polyisocyanurate plastic material intended for use as thermal insulation on surfaces from –297��F (–183��C) to 300��F (149��C). For specific applications, the actual
Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
- ICS
- CCS
- Q25
- 发布
- 2021
- 实施
1.1?This specification covers the composition, thermal performance, sound absorption performance, and physical properties of high-temperature fiber thermal insulation for use at temperatures from ambient to 3000��F (1649��C). 1.2?The dry, loose high-temperature fibers shall be
Standard Specification for Pneumatically Applied High-Temperature Fiber Thermal Insulation for Industrial Applications
- ICS
- CCS
- Q25
- 发布
- 2021
- 实施
Tissue paper and tissue products - Test method
- ICS
- 01.040.85
- CCS
- Q25
- 发布
- 2020-12-08
- 实施
- 2020-12-08
This document specifies characteristics of factory-made vacuum insulation panels (VIP) intended to be used for the thermal insulation of buildings. This document is applicable for all types of factory-made vacuum insulation panels (VIP), independent of the core material (see 3.1.
Thermal insulation products for buildings - Factory-made vacuum insulation panels (VIP) - Specification; German version EN 17140:2020
- ICS
- 91.100.60
- CCS
- Q25
- 发布
- 2020-12-01
- 实施
Thermal insulation products for buildings. Factory-made vacuum insulation panels (VIP). Specification
- ICS
- 91.100.60
- CCS
- Q25
- 发布
- 2020-10-27
- 实施
- 2020-10-27
本文件适用于天花板隔声性能测定
Method for measuring ceiling sound insulation performance
- ICS
- 91.060.30
- CCS
- Q25
- 发布
- 2020-10-16
- 实施
- 2020-11-16
规定了外墙保温用增强竖丝岩棉复合板的术语和定义，规格和标记，材料，要求，试验方法，检验规则，标志、包装、运输和贮存。
Reinforced vertical rock wool composite board
- ICS
- 91.100.01
- CCS
- Q25
- 发布
- 2020-03-12
- 实施
- 2020-09-01
本规程适用于抗震设防烈度8度及以下地区新建、改建和扩建的民用与工业建筑中现浇混凝土保温工程。
Technical specification for application of prefabricated steel wire grid insulation board cast-in-place concrete cavity-free composite wall insulation system
- ICS
- 91.100.60
- CCS
- Q25
- 发布
- 2019-09-17
- 实施
- 2019-12-01
规定了保温系统材料绿色建材评价的术语和定义、评价要求和评价方法。
Assessment standard for green building materials - Heat insulating system material
- ICS
- 99
- CCS
- Q25
- 发布
- 2019-09-12
- 实施
- 2020-03-01
本规程共分7章，主要技术内容包括：总则、术语和符号、基本规定、材料、设计、安装、工程验收。
Technical specification for double skin metal faced insulating sandwich panels for cold store engineering
- ICS
- 91.060.10
- CCS
- Q25
- 发布
- 2019-08-14
- 实施
- 2020-02-01
现批准《建筑木结构用阻燃涂料》为建筑工业行业产品标准，编号为JG/T572-2019，自2019年12月1日起实施。 本标准在住房和城乡建设部门户网站（www.mohurd.gov.cn）公开，并由住房和城乡建设部标准定额研究所组织中国标准出版社出版发行。 中华人民共和国住房和城乡建设部 2019年7月18日
Fire retardant coatings for building wood structures
- ICS
- 13.220.50
- CCS
- Q25
- 发布
- 2019-07-18
- 实施
- 2019-12-01
