共找到 848 条与 耐火材料综合 相关的标准,共 57 页
Refractory products—Determination of dynamic Young’s modulus(MOE)at elevated temperatures by impulse excitation of vibration
Sample preparation for testing of shaped refractory products
Refractory products—Determination of torsion strength at elevated temperature
Chemical analysis methods for determination of Fe2+ and Fe3+ in refractory products by the spectral photometric method with 1,10-phenanthroline
Refractory Products—Determination of tensile strength at elevated temperature
本标准规定了耐火材料高温抗折强度试验方法的原理.设备.试样.试验步又、结果计算及试验报告等。 本标准适用于定形和不定形耐火材料。
Refractory products—Determination of modulus of rupture at elevated temperatures
Chemical analysis of refractories containing carbon and silicon carbide or nitride
本标准规定了定形耐火制品尺寸、外观及断面的检查工具和检查方法。 本标准适用于致密定形及定形隔热耐火制品的尺寸、外观和断面的检查。
Shaped refractory products inspections of dimension, appearance and section
Chemical analysis of alumina silica refractories
本标准规定了致密定形耐火制品透气度的试验方法,不定形耐火材料透气度的测定可参照本标准进行。
Dense shaped refractory products.Determination of permeability to gases
本标准规定了隔热耐火砖抗剥落性试验方法的术语和定义、原理、仪器设备、试样、试验步骤、结果计算及处理和试验报告。 本标准适用于隔热耐火砖抗剥落性的测定。
Determination of spalling resistance of insulating fire bricks
本标准规定了耐火材料化学分析相关的术语和定义、设备、试剂、取样、试样质量、灼烧减量的测定、结果计算、试验结果表示、试验结果的检查和采用及试验报告。 本标准适用于通过湿法、AAS和ICP-AES进行耐火材料制品和原料的化学分析标准的一般要求。
Chemical analysis of refractories.General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry(ICP-AES) methods
Chemical analysis of magnesia-alumina refractories
本标准规定了分光法测定含铬耐火材料中六价铬含量的化学分析方法。 本标准适用于六价铬的测定范围小于500 μg/g。
Determination of chromium (Ⅵ)in chrome refractories.Spectrometric method
本标准规定了镁铝系耐火材料化学分析方法。本标准分析的项目如下: a) 灼烧减量(LOI); b) 二氧化硅(SiO); c) 氧化铝(AlO); d) 氧化铁(FeO); e) 二氧化钛(TiO); f) 氧化钙(CaO); g) 氧化镁(MgO); h) 氧化钾(KO); i) 氧化钠(NaO); j) 氧化锰(MnO); k) 五氧化二磷(PO); l) 镁砂中游离氧化钙(F.CaO); m) 氧化锆(铪)[Zr(Hf)O]; n) 三氧化二铬(CrO)。 本标准适用于镁铝系耐火材料中分析元素的测定范围见表1。
Chemical analysis of magnesia-alumina refractories
Chemical analysis of refractories containing chrome
本标准规定了致密定形耐火制品体积密度、显气孔率和真气孔率测定的术语和定义、原理、设备和材料、试样、试验步骤、结果计算、试验误差及试验报告。 本标准适用于致密定形耐火制品体积密度、显气孔率和真气孔率的测定。
Test method for bulk density,apparent porosity and true porosity of dense shaped refractory products
本标准规定了耐火材料中总BO质量分数的测定方法。本标准适用于耐火材料总BO的测定,陶瓷、玻璃、釉料等其他材料中总BO也可参照本标准进行测定。不同检测方法适用的含量范围见表1。
Determination of boron oxide in refractory materials
Determination of chromium (Ⅵ) in chrome refractories—Spectrometric method
本标准规定了含铬耐火材料的化学分析。本标准分析的项目如下: a) 灼烧减量(LOI); b) 二氧化硅(SiO); c) 氧化铁(FeO); d) 氧化铝(AlO); e) 二氧化钛(TiO); f) 氧化钙(CaO); g) 氧化镁(MgO); h) 三氧化二铬(CrO); i) 氧化钾(KO); j) 氧化钠(NaO); k) 氧化锰(MnO); l) 五氧化二磷(PO); m) 氧化锆(铪)[Zr(Hf)O]。 本标准适用于分析元素的测定范围见表1。
Chemical analysis of refractories containing chrome
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号