Q52 炭素材料 标准查询与下载

YS/T 63.14-2006 铝用炭素材料检测方法　第14部分：抗折强度的测定　三点法

本部分规定了预焙阳极和底部炭块抗折强度的测定方法。 本部分适用于预焙阳极和底部炭块抗折强度的测定。

Carbonaceous materials used in the production of aluminium-Part 14:Determination of bending/shear strength by a three-point method

YS/T 63.3-2006 铝用炭素材料检测方法　第3部分：热导率的测定　比较法

本部分规定了用比较法测定铝用炭素材料20℃～60℃间的热导率。 本部分适用于铝用炭素材料热导率的测定。测定范围：2W/(K•m)～100W/(K•m)。 本部分也适用于测定石墨电极等其他炭素材料的热导率。

Carbonaceous materials used in the production of aluminium-Part 3:Determination of the thermal conductivity using a comparative method

YS/T 63.1-2006 铝用炭素材料检测方法　第1部分：阴极糊试样焙烧方法、焙烧失重的测定及生坯试样表观密度的测定

本部分规定了阴极糊生坯试样的制备方法以及制备后的焙烧过程，同时还规定了生坯试样表观密度的测定以及焙烧过程中质量损失的测定。 本部分适用于阴极糊试样的焙烧制备，该试样可用于测定表观密度、抗压强度、气孔率等。

Carbonaceous materials used in the production of aluminium Part 1 Cathodic pastes-Preparation of baked test pieces、determination of loss on baking and apparent density after ramming

YS/T 63.6-2006 铝用炭素材料检测方法　第6部分：开气孔率的测定　液体静力学法

本部分规定了液体静力学法测定铝用炭素材料在水中的开气孔率。 本部分适用于测定铝用炭素材料在水中的开气孔率，同时也能测定在水中的表观密度，本部分尤其适合不规则几何形状的样品（由于此类样品加工困难）。

Carbonaceous materials used in the production of aluminium-Part 6:Determination of open porosity using a hydrostatic method

YS/T 63.8-2006 铝用炭素材料检测方法　第8部分：二甲苯中密度的测定　比重瓶法

本部分规定了铝用炭素材料在二甲苯中密度的测定方法。 本部分适用于铝用炭素材料在二甲苯中密度的测定。

Carbonaceous materials used in the production of aluminium-Part 8:Determination of the density in xylene by a pyknometric method

YS/T 63.5-2006 铝用炭素材料检测方法　第5部分：有压下底部炭块钠膨胀率的测定

本部分规定了铝用底部阴极炭块由于钠渗透引起的线性膨胀率（即钠膨胀率）的测定方法。 本部分适用于测定铝用底部阴极炭块由于钠渗透引起的线性膨胀率（即钠膨胀率）。

Carbonaceous materials used in the production of aluminium-Part 5:Cathode blocks-Determination of expansion due to sodium penetration with application of pressure

DIN 51942 Berichtigung 1:2006 碳素材料试验.采用脉冲激励法测定动态弹性模量.固体材料.DIN 51942-2002-03勘误

This standard specifies a method for the determination of dynamic modules of elasticity of carbonaceous materials (solid materials) by pulse exitation.

Testing of carbonaceous materials - Determination of dynamic moduls of elasticity by pulse excitation - Solid materials, Corrigenda to DIN 51942:2002-03

YB/T 5213-2005 炭块耐碱性试验方法

本标准规定了炭块耐碱性试验方法的原理、仪器设备及试剂材料、试样制备、试验步骤、结果计算及评定等。 本标准适用于高炉用炭砖及其它高炉用耐火材料耐碱性试验。

Test method for the alkali-resistant of carbon bricks

BS ISO 14428:2004 铝生产用含碳材料.冷和微温冲压浆料.烘烤时的膨胀/收缩

This International Standard specifies the determination of expansion/shrinkage during baking of cold and tepid ramming pastes used in the production of aluminium.

Carbonaceous materials for the production of aluminium - Cold and tepid ramming pastes - Expansion/shrinkage during baking

ISO 20203:2005 铝生产中使用的碳素材料.煅烧焦炭.用X-射线衍射法测定煅烧石油焦的晶体粒度

This International Standard describes a test method for the determination of the mean crystallite height of a representative, pulverized sample of calcined petroleum coke by interpretation of an X-ray diffraction pattern produced through conventional X-ray scanning techniques. It applies to carbonaceous materials used in the production of aluminium. Calcined petroleum coke contains crystallites of different heights. This test method covers the determination of the average height of all crystallites in the sample by empirical interpretation of the X-ray diffraction pattern. The crystallite diameter (Lα) is not determined by this test method.

Carbonaceous materials used in the production of aluminium - Calcined coke - Determination of crystallite size of calcined petroleum coke by X-ray diffraction

ISO 8005:2005 铝生产用碳素材料.生焦炭和煅烧焦炭.灰分含量的测定

This International Standard specifies a method for the determination of ash in green and calcined coke used in the production of aluminium.

Carbonaceous materials used in the production of aluminium - Green and calcined coke - Determination of ash content

BS ISO 14420:2005 铝生产用含碳产品.焙烧阳极和成形碳产品.线性热膨胀系数的测定

This International Standard specifies a method to determine the coefficient of linear thermal expansion of carbonaceous or graphite materials (solid materials) for the production of aluminium between 20 ℃ and 300 ℃. It applies to baked anodes and shaped carbon products.

Carbonaceous products for the production of aluminium - Baked anodes and shaped carbon products - Determination of the coefficient of linear thermal expansion

ISO 14428:2005 铝生产用碳素材料.冷和微温冲压浆料.烘烤时的膨胀/收缩

Carbonaceous materials for the production of aluminium - Cold and tepid ramming pastes - Expansion/shrinkage during baking

YB/T 2818-2005 石墨块

本标准规定了石墨块的技术要求、试验方法、检验规则、包装、标志、贮存、运输和质量证明书。 本标准适用于冶炼炉、电阻炉做炉衬和导电材料，以及不透性石墨热交换器用的石墨块。

Graphite block

ISO 14435:2005 铝生产用含碳材料.石油焦.用感应耦合等离子体原子发射光谱测定法测定痕量金属

This International Standard applies to carbonaceous materials for the production of aluminium. This International Standard describes a test method which covers the analysis for commonly determined trace metals in test specimens of raw and calcined petroleum coke by inductively coupled plasma atomic emission spectroscopy. It can also be applied to other heat-treated carbonaceous materials e.g. coal-tar pitch coke, anthracite. Elements to which this test method applies are listed in Table 1. Detection limits, sensitivity, and optimum ranges of the metals will vary with the matrices and model of spectrometer. This test method is applicable only to samples containing less than a mass fraction of 1 % ash. Elements present at concentrations above the upper limit of the working ranges can be determined with additional, appropriate dilutions.

Carbonaceous materials for the production of aluminium - Petroleum coke - Determination of trace metals by inductively coupled plasma atomic emission spectrometry

YS/T 287-2005 铝电解用半石墨质阴极炭块

本标准规定了铝电解用半石墨质阴极炭块的要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于砌筑铝电解槽用半石墨质阴极炭块。

Partially graphitiferous cathode carbon block for aluminium electrolysis

BS ISO 12987:2005 铝制品用碳质材料.阳极、阴极块、侧壁砖和烤灌糊.使用比较法测定热传导性

This International Standard specifies a method for the determination of thermal conductivity of carbonaceous material in the temperature range of 20 ℃ to 60 ℃. The typical range of thermal conductivity for these materials is 2 W/(K·m) to 100 W/(K·m). This method can be used for other carbon materials, such as graphitized electrodes for other applications.

Carbonaceous materials for the production of aluminium - Anodes, cathodes blocks, sidewall blocks and baked ramming pastes - Determination of the thermal conductivity using a comparative method

ISO 12986-2:2005 铝生产用碳素材料.预焙阳极和阴极碳块.第2部分:用四点法测定抗弯强度

This part of ISO 12986 specifies a four-point method to determine the flexural strength of carbon and solids graphite materials at room temperature.

Carbonaceous materials used in the production of aluminium - Prebaked anodes and cathode blocks - Part 2: Determination of flexural strength by the four-point method

NF T25-101*NF EN ISO 10618:2005 碳纤维.树脂浸渍纱拉伸性能的测定

Carbon fibre - Determination of tensile properties of resin-impregnated yarn.

ANSI/AWWA B600-2005 粉末状活性碳

This standard covers powdered activated carbon for use in adsorption of impurities for water supply service applications.

Powdered Activated Carbon