Q71 木构配件 标准查询与下载

DIN EN 14761:2008 木地板.实心木地板.直指、宽指和模块砖

This European Standard specifies the characteristics of solid vertical and wide finger as well as Module brick including the laying units made of softwood or hardwood for internal use as flooring. This standard covers products without surface treatments. This standard covers also treated or untreated elements.

Wood flooring - Solid wood parquet - Vertical finger, wide finger and module brick(includes Amendment A1:2008); English version of DIN EN 14761:2008-09

DIN EN 14081-4:2008 木结构.带矩形横断面的强度等级结构木材.第4部分:机械分级.机械受控系统用分级机械设置

This European Standard gives settings, derived according to the requirements given in EN 14081-2, for various combinations of strength classes or grades, grading machines and species from particular sources of growth. These settings are only applicable to timber from the sources indicated in the tables.

Timber structures - Strength graded structural timber with rectangular cross section - Part 4: Machine grading - Grading machine settings for machine controlled systems; German version EN 14081-4:2005+A3:2008

DIN EN 14342:2008 木地板.特性、一致性评估和标记

This European Standard defines and specifies for wood and parquet flooring products the relevant characteristics, requirements and appropriate test methods to determine these characteristics when used as internal flooring, including enclosed public transport premises. It also applies to wood veneer floor coverings. This document covers flooring defined in EN 13226, EN 13227, EN 13228, EN 13488, EN 13489, EN 13990, EN 13629, DEN 14761 and EN 14354. It does not specify dimensional limits or tolerances, which are given by these same standards. This European Standard provides also for the evaluation of conformity and the requirements for marking these products. This document covers also the wood and parquet flooring products which may be treated to improve their reaction to fire performance. This European Standard does not apply to the wood and parquet flooring products with tactile surfaces or to aid visibility, e.g. products with tactile or visible strip applied.

Wood flooring - Characteristics, evaluation of conformity and marking; German version EN 14342:2005+A1:2008

NF B53-668/IN1:2008 木地板.特性、合格评估和标记

Wood flooring - Characteristics, evaluation of conformity and marking.

NF B53-668:2008 木制地板覆盖物.特性、合格性评估和标记

Wood flooring - Characteristics, evaluation of conformity and marking.

DIN 18203-3:2008 建筑结构公差.第3部分:木材及其衍生木制品的建筑部件

This standard specifies tolerances for components of timber and wood-based panel products ("panels", for short) which are used for columns, beams and panels (see DIN 1052) for walls, floors and roofs. The tolerances concerned are manufacturing tolerances. This standard is to be applied on the basis of DIN 18202. Tolerances and dimensional variations due to shrinkage and swelling of building products of solid wood, glued laminated timber and wood-based panels are specified in DIN EN 336, DIN EN 390, DIN 1052, DIN 4074-1, DIN 68100 and in the wood-based panel product standards listed in DIN EN 13986. This standard does not take into account deformations caused by loading or occurring over a long period of time. Such deformations may need to be taken into account additionally.

Tolerances in building constructions - Part 3: Building components of wood and derived timber products

BS EN 131-3:2007 梯子.使用说明书

This European Standard advises on the safe use of ladders covered by the scope of EN 131-1 and fulfilling the requirements of EN 131-1, EN 131-2 and, for single or multiple hinged-joint ladders, EN 131-4 used as standing or leaning ladders.

Ladders - Part 3:User instructions

SANS 1039:2008 木制天花板和壁板

Covers three grades of profiled boards (planed or planed and sanded) manufactured from hardwood or softwood timber and intended for use in ceilings or panelling.

Wooden ceiling and panelling boards

JIS A 6506 AMD 1:2008 建筑构件(木质地板)(修改件1)

Building components (Wood panel for floor) (Amendment 1)

DIN CEN/TS 15680:2008 预制木楼梯.机械试验方法

Prefabricated timber stairs - Mechanical test methods; German version CEN/TS 15680:2007

DIN CEN/TS 15676:2008 木地板.防滑.振动试验

Wood flooring - Slip resistance - Pendulum test; German version CEN/TS 15676:2007

DD CEN/TS 15680:2007 预制木楼梯.机械试验方法

This Technical Specification gives test methods for prefabricated timber stairs. These stairs are made from timber and/or wood-based materials. The methods included in this document can also be used for single components used in stairs (e.g. steps, handrails, balusters, …). This document does not consider the overall structure design of these elements. Stairs that are designed to contribute to the overall stability of the works or to the strength of the structure are not covered by this standard. The surfaces of the timber elements may be exposed or covered by finishes. NOTE 1 Where stairs are supplied with a finish or covering, some basic characteristics will not be covered by this standard and references should be made to the appropriate product standard (e.g. colour fastness of carpet finishes) NOTE 2 Where the term "stair" is used in this document, it may also apply to individual element or component where appropriate Tests can be carried out on a complete fully assembled system according to manufacturer installation instructions or on individual components. A fully assembled stair test cannot be used to evaluate individual components. There is no particular hierarchy of sequences or the need to carry out all the tests. NOTE The nature of used tests and elements can be given by national regulations.

Prefabricated timber stairs — Mechanical test methods

BS DD CEN/TS 15680:2007 预制木楼梯.机械试验方法

This Technical Specification gives test methods for prefabricated timber stairs. These stairs are made from timber and/or wood-based materials. The methods included in this document can also be used for single components used in stairs (e.g. steps, handrails, balusters, …). This document does not consider the overall structure design of these elements. Stairs that are designed to contribute to the overall stability of the works or to the strength of the structure are not covered by this standard. The surfaces of the timber elements may be exposed or covered by finishes. NOTE 1 Where stairs are supplied with a finish or covering, some basic characteristics will not be covered by this standard and references should be made to the appropriate product standard (e.g. colour fastness of carpet finishes) NOTE 2 Where the term "stair" is used in this document, it may also apply to individual element or component where appropriate Tests can be carried out on a complete fully assembled system according to manufacturer installation instructions or on individual components. A fully assembled stair test cannot be used to evaluate individual components. There is no particular hierarchy of sequences or the need to carry out all the tests. NOTE The nature of used tests and elements can be given by national regulations.

Prefabricated timber stairs - Mechanical test methods

ANSI O5.3-2008 实心锯.木交叉撑的规范和尺寸

Consists of specifications covering solid sawn-wood crossarms and braces manufactured from costal Douglas-fir, loblolly pine, and slash pine. The specifications are intended to cover communication crossarms, power crossarms, heavy-duty crossarms, and heavy-duty braces.

Solid Sawn - Wood Crossarms and Braces Specifications and Dimensions

ANSI A14.3-2008 梯子.固定的.安全要求

This standard prescribes minimum requirements for design, construction, and use of fixed ladders, and sets forth requirements for cages, wells, and ladder safety systems used with fixed ladders, in order to minimize personal injuries. All parts and appurtenances necessary for a safe and efficient ladder shall be considered integral parts of the design. Comments must be sent on the comment from included in each A14.3 Standards Draft. Comments must include a rationale.

Ladders - Fixed - Safety Requirements

DD CEN/TS 15676:2007 木地板.防滑.振动试验

This Technical Specification specifies the method of applying the pendulum test to wood flooring, in order to determine the slip resistance.

Wood flooring — Slip resistance — Pendulum test

BS DD CEN/TS 15676:2007 木地板.防滑.振动试验

This Technical Specification specifies the method of applying the pendulum test to wood flooring, in order to determine the slip resistance.

Wood flooring - Slip resistance - Pendulum test

DIN EN 14081-4:2007 木结构.带矩形横截面的强度分级的结构木材.第4部分:机器分级.机器受控系统的分级机器设置

This European Standard gives settings, derived according to the requirements given in EN 14081-2, for various combinations of strength classes or grades, grading machines and species from particular sources of growth. These settings are only applicable to timber from the sources indicated in the tables.

Timber structures - Strength graded structural timber with rectangular cross section - Part 4: Machine grading - Grading machine settings for machine controlled systems; German version EN 14081-4:2005+A2:2007

DIN EN 14342 Berichtigung 1:2007 木制地板.特性、合格评估和标记.技术勘误DIN EN 14342-2005

Wood flooring - Characteristics, evaluation of conformity and marking; German version EN 14342:2005, Corrigenda to DIN EN 14342:2005-08; German version EN 14342:2005/AC:2007

DIN EN 14915 Berichtigung 1:2007 实心木质镶板和覆层.特性、合格评估和标记.技术勘误DIN EN 14915-2006

Solid wood panelling and cladding - Characteristics, evaluation of conformity and marking; German version EN 14915:2006, Corrigenda to DIN EN 14915:2006-11; German version EN 14915:2006/AC:2007