Q76 建筑暖通、空调器材设备 标准查询与下载

DIN 1056:2009 独立式烟囱的刚体结构.砖衬.计算和设计

Solid construction, free-standing chimneys - Brick liners - Calculation and design

DIN EN 1264-5:2009 内部水基表面加热和冷却系统.第5部分:地板、天花板和墙内部加热和冷却表面.热输出的测定

This European Standard applies to water based heating and cooling systems embedded into the enclosure surfaces of the room to be heated or to be cooled. Part 5 of this standard deals with the recalculation of values determined in Part 2 of this European Standard for the system in question, using it for floor heating applications. The recalculation method described in this part of the standard enables the conversion of the calculation and test results of Part 2 into results for other surface orientations in the room, i.e. for ceiling and wall heating, as well as for the application as cooling surfaces, i.e. for floor, ceiling and wall cooling. It has to be emphasised that the test results of Part 2 of this European Standard are the basis of all calculation. Therefore the use of this prove method is necessary whether or not the system in question is used for heating or cooling application. This European Standard shall be applied to commercial trade and practical engineering if proved and certifiable values of the thermal output shall be used.

Water based surface embedded heating and cooling systems - Part 5: Heating and cooling surfaces embedded in floors, ceilings and walls - Determination of the thermal output; English version of DIN EN 1264-5:2009-01

DIN EN 1264-2:2009 内部水基表面加热和冷却系统 第2部分 地板加热 用计算和试验方法测定热输出的检验法

This European Standard specifies the boundary conditions and the prove methods for the determination of the thermal output of hot water floor heating systems as a function of the temperature difference between the heating medium and the room temperature. This standard shall be applied to commercial trade and practical engineering if proved and certifiable values of the thermal output shall be used. This European Standard applies to heating and cooling systems embedded into the enclosure surfaces of the room to be heated or to be cooled. This Part of this European Standard applies to hot water floor heating systems. Applying of Part 5 of this European Standard requires the prior use of this Part of this European Standard. Part 5 of this European Standard deals with the conversion of the thermal output of floor heating systems determined in Part 2 into the thermal output of heating surfaces embedded in walls and ceilings as well as into the thermal output of cooling surfaces embedded in floors, walls and ceilings. The thermal output is proved by a calculation method (Clause 6) and by a test method (Clause 9). The calculation method is applicable to systems corresponding to the definitions in EN 1264-1 (type A, type B, type C, type D). For systems not corresponding to these definitions, the test method shall be used. The calculation method and the test method are consistent with each other and provide correlating and adequate prove results. The prove results, expressed depending on further parameters, are the standard specific thermal output and the associated standard temperature difference between the heating medium and the room temperature as well as fields of characteristic curves showing the relationship between the specific thermal output and the temperature difference between the heating medium and the room.

Water based surface embedded heating and cooling systems - Part 2: Floor heating: Prove methods for the determination of the thermal output using calculation and test methods; English version of DIN EN 1264-2:2009-01

ANSI/UL 1777a-2009 烟囱衬壁安全标准

The following changes in requirements are being proposed: Revisions to the strength requirements of UL 1777 including: specifying that Loading Test for Metallic Chimney Liners, Section 23, does not apply to corrugated liners; reducing loading tests of liners for gas-fueled appliances from 200 to 100 pounds; and specifying that a liner intended for venting gas-fueled only appliances is not subject to the sweep test.

Standard for Safety for Chimney Liners

ANSI/AHAM PAC-1-2009 便携式空调

This standard establishes a uniform, repeatable procedure or standard method for measuring capacity of portable air conditioners. The standard establishes test conditions for measuring room cooling capacity and spot cooling capacity.

Portable Air Conditioners

ANSI/UL 586-2009 高效微粒空气过滤装置安全性标准

The following is being proposed: Revising requirement regarding testing facility location

Standard for Safety for High-Efficiency, Particulate, Air Filter Units

ANSI/UL 1777-2009 烟囱内衬砌料安全性标准

Standard for Safety for Chimney Liners

ANSI/AHRI 440-2009 室内电扇线圈的性能额定值

This standard applies to room fan-coils having air delivery capacities of 1,500 cfm or less.

Performance Rating of Room Fan-Coils

ANSI/UL 641-2009 L型低温通风系统的安全性标准

UL proposes the following change to 641: Correction of Celsius units in Paragraph 19.1.

Standard for Safety for Type L Low-Temperature Venting Systems

ANSI/UL 2561-2009 工厂制造华氏1400度烟囱的安全性标准

UL proposes the First Edition for the Standard for 1400 Degree Fahrenheit Factory-Built Chimneys, UL 2561.

Standard for Safety for 1400 Degree Fahrenheit Factory-Built Chimneys

ANSI/ASHRAE 37-2009 电驱动单元空调和热泵设备的评级试验方法

The purpose of this standard is to provide test methods for determining the cooling capacity of unitary air-conditioning equipment and the cooling or heating capacities, or both, of unitary heat pump equipment. These test methods do not specify methods of establishing ratings that involve factors such as manufacturing tolerances and quality control procedures.

Methods of Testing for Rating Electrically Driven Unitary Air-Conditioning and Heat Pump Equipment

ANSI/ASHRAE 174P-2009 基于干燥剂的除湿设备评级试验方法

This proposed standard provides a method of test for rating the overall performance of desiccant-based dehumidification equipment. Desiccant-based systems are typically designed with moisture removal as their primary function and deliver air at lower dew points than typical air conditioning systems. This method of test has been developed to assist in the measurement and documentation of variables needed to establish moisture-removal capacity per unit of energy.

Method of Test for Rating Desiccant-Based Dehumidification Equipment

ANSI/AHRI 1060-2009 能量恢复通风设备用空气对空气热交换机的性能额定值

This standard applies to factory-made Air-to-Air Heat Exchangers for use in Air-to-Air Energy Recovery Ventilation Equipment.

Performance Rating of Air-to-Air Heat Exchangers for Energy Recovery Ventilation Equipment

ANSI/ASSE 1012-2009 带中气压通风口的防回流装置的性能要求

Backflow Preventers with Intermediate Atmospheric Vent are installed in the plumbing system to prevent backflow into potable water lines due to the creation of back pressure or backsiphonage.

Performance Requirements for Backflow Preventer with Intermediate Atmospheric Vent

KS B ISO 13710:2008 石油、石油化学和天然气工业.往复式变容真空泵

이 표준은 석유, 석유화학 및 천연가스 산업에서 이용하는 왕복 용적형 펌프와 펌프 장치에

Petroleum, petrochemical and natural gas industries-Reciprocating positive displacement pumps

BS EN 15116:2008 建筑物的通风.冷却梁.有源冷却梁的测试和评定

This European Standard specifies methods for measuring the cooling capacity of chilled beams with forced air flow. The evaluation of aerodynamic air performance is not part of this standard. It will be dealt with in the future in a new standard entitled "Air terminal devices - Aerodynamic testing and rating for mixed flow applications for non isothermal testing - Cold jets". The purpose of the standard is to give comparable and repeatable product data. The test method applies to all types of convector cooling systems with forced air supply using any medium as energy transport medium. This standard only applies to situations where induced air only passes through the heat exchanger (primary air does not pass through the heat exchanger). NOTE The result is valid only for the specified test set up. For other conditions, (i.e. different positions of heat loads, inactive ceiling elements around the test objects), the producer should give guidance based on full scale tests. This standard refers to water as the main cooling medium, with the possibility of additional cooling from the primary air. Wherever water is written, any other cooling medium can also be used in the test.

Ventilation in buildings - Chilled beams - Testing and rating of active chilled beams

JIS A 4008:2008 通风盘管装置

Fancoil units

DIN EN 14511-3 Berichtigung 1:2008 空间加热和制冷用带电驱动压缩机的空调、液体冷却组件和热泵.第3部分:试验方法.技术勘误DIN EN 14511-3-2008

Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 3: Test methods; German version EN 14511-3:2007, Corrigendum to DIN EN 14511-3:2008-02; German version EN 14511-3:2007/AC:2

BS EN 15287-2:2008 烟囱.烟囱的设计、安装和试运转.密封房间器具用烟囱

This European Standard describes the method of specifying the design, installation and labelling criteria for chimney systems, connecting flue pipes and air supply pipes for roomsealed heating applications. It also gives information on commissioning of an installed chimney. This standard does not cover:  chimneys designated H (high positive pressure chimneys), and chimneys designated P (normal positive pressure chimneys) serving more than one appliance,  chimneys which serve a mixture of fan assisted or forced draught burners or natural draught appliances,  installations having a configuration of the type C2. This European Standard does not apply to freestanding chimneys covered by EN 13084-1. This standard also specifies limitations for supporting a chimney, and the maximum unsupported chimney height for system chimneys and custom built chimneys.

Chimneys - Design, installation and commissioning of chimneys - Part 2: Chimneys for roomsealed appliances

BS EN 15287-1:2007 烟囱.烟囱的设计、安装和试运转.非密封房间加热器具用烟囱

This European Standard describes the method of specifying the design, installation criteria for system chimneys, construction of custom built chimneys, and the relining of existing chimneys. It also gives information on commissioning of chimneys. This European Standard also deals with connecting flue pipes. This European Standard does not apply to freestanding chimneys covered by EN 13084-1. This European Standard excludes chimneys designated H (high positive pressure chimneys) and chimneys for room-sealed heating appliances. For the purpose of this European Standard the term "installation" includes construction.

Chimneys - Design, installation and commissioning of chimneys - Part 1: Chimneys for non-roomsealed heating appliances