Q81 供水、排水器材设备 标准查询与下载

DIN EN ISO 11296-7:2013 地下无压排水道及污水网的翻修用塑料管道系统.第7部分:螺旋衬管(ISO 11296-7-2011).德文版本EN ISO 11296-7-2013

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2011); German version EN ISO 11296-7:2013

BS EN 12566-7:2013 高达50 PT的小型废水处理系统.预制三级处理装置

Small wastewater treatment systems for up to 50 PT. Prefabricated tertiary treatment units

NF P41-650:2013 水处理装置.滤水壶

Water treatment devices - Water filter jug

NF T54-938-2*NF EN ISO 15874-2:2013 冷热水装置用塑料管道系统.聚丙烯(PP).第2部分:管道

Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: pipes

NF T54-938-3*NF EN ISO 15874-3:2013 冷热水装置用塑料管道系统.聚丙烯(PP).第3部分:配件

Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: fittings

JIS A 7501:2013 污水管道系统维护计划

Planning for sewer system maintenance

NF T57-228:2013 带或不带压力的供水用塑料管道系统.基于非饱和聚酯树脂(UP)的玻璃增强型热固性塑料(GRP)

Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)

NF P16-321-6*NF EN 295-6:2013 排水管和下水道用陶土管道系统.第6部分:人孔和检查井组件的要求

Vitrified clay pipes systems for drain and sewers - Part 6: requirements for components of manholes and inspection chambers

BS EN 1796:2013 有压或无压供水塑料管道系统.基于不饱和聚酯树脂(UP)的玻璃增强热固性塑料(GRP)

Plastics piping systems for water supply with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)

BS EN ISO 15874-3:2013 冷热水装置用塑料管道系统.聚丙烯(PP).配件

Plastics piping systems for hot and cold water installations. Polypropylene (PP). Fittings

BS EN ISO 15874-5:2013 冷热水装置用塑料管道系统.聚丙烯(PP).系统的适用性

Plastics piping systems for hot and cold water installations. Polypropylene (PP). Fitness for purpose of the system

BS EN ISO 15874-2:2013 热水和冷水设施用塑料管道系统.聚丙烯(PP).管道

Plastics piping systems for hot and cold water installations. Polypropylene (PP). Pipes

BS EN 14364:2013 地下压力排水和排污水塑料管道系统.不饱和聚酯树脂(UP)基玻璃纤维增强的热固性塑料(GRP).管道、配件和连接件规格

Plastics piping systems for drainage and sewerage with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Specifications for pipes, fittings and joints

BS EN ISO 15874-1:2013 热水和冷水设施用塑料管道系统.聚丙烯(PP).总则

Plastics piping systems for hot and cold water installations. Polypropylene (PP). General

JIS T 9268:2013 辅助产品.马桶增高器

This Japanese Industrial Standard specifies the toilet seat with adjustable height seat surface to assist standing and sitting, and the toilet seat having the hoisting and lowering mechanism to assist standing and sitting (hereafter referred to as “raised toilet seats”). However, it excludes the Japanese squat-sitting conversion type toilet seat and the toilet whose bowl itself is hoisted and lowered.

Assistive products.Raised toilet seats

JIS B 8570-1:2013 冷水和热水表.第1部分:总规范

Meters for cold water and hot water.Part 1: General specifications

DB11/T 967-2013 塑料排水检查井应用技术规程

Application technical specification for plastic drainage inspection well

SN/T 3566-2013 滤膜抽滤核酸提取方法

本标准规定了滤膜法核酸快速提取技术的操作方法。本标准适用于检验检疫机构对病原体核酸的提取。

Nucleic acid extraction method based on membrane filtration

DIN EN 16146:2013 卫生龙头配件. 1型和2型供应系统用卫生空头配件的可拔出淋浴软管. 通用技术规范; 德文版本EN 16146-2012

This European Standard applies to hoses for extractable outlets of any material intended for equipping sanitary tapware for sinks and basins. Such hoses will only be connected downstream of the obturator of the tapware. The tapware will comply with EN 200,EN 817,EN 1111,EN 1286 or EN 1287.

Sanitary tapware - Extractable shower hoses for sanitary tapware for supply systems type 1 and type 2 - General technical specification; German version EN 16146:2012

DIN EN 16145:2013 卫生设备配件.水槽和脸盆龙头用可抽出排水口.通用技术规范.德文版本EN 16145-2012

Sanitary tapware - Extractable outlets for sink and basin mixers - General technical specification; German version EN 16145:2012