Q82 供气器材设备 标准查询与下载

BS EN 1555-2:2021 气体燃料供应用塑料管道系统. 聚乙烯(PE). 管道

Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Pipes

BS EN 1555-3:2021 用于供应气体燃料的塑料管道系统 聚乙烯（PE） 配件

Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Fittings

ASME B31.8-2020 气体传输与分配管道系统

This Code covers the design, fabrication, installation, inspection, and testing of pipeline facilities used for the transportation of gas. This Code also covers safety aspects of the operation and maintenance of those facilities. (See Mandatory Appendix Q for scope diagrams.) This Code is concerned only with certain safety aspects of liquefied petroleum gases when they are vaporized and used as gaseous fuels. All of the requirements of NFPA 58 and NFPA 59 and of this Code concerning design, construction, and operation and maintenance of piping facilities shall apply to piping systems handling butane, propane, or mixtures of these gases. 本规范涵盖用于天然气运输的管道设施的设计、制造、安装、检查和测试。本守则还涵盖这些设施的运营和维护的安全方面。（有关范围图，请参阅强制性附录 Q。 本规则仅涉及液化石油气汽化并用作气体燃料时的某些安全方面。NFPA 58 和 NFPA 59 以及本规范中有关管道设施的设计、建造、操作和维护的所有要求均适用于处理丁烷、丙烷或这些气体混合物的管道系统。

Gas Transmission and Distribution Piping Systems

DIN 4069:2021 分气栅. 指示标签

This document is applicable to indication labels to identify the marking on in-service pipelines in gas distribution grids and any necessary installations in operation.

Gas distribution grids - Indication labels

DIN EN ISO 16486-2:2021 气体燃料供给用塑料管道系统. 带有热熔接头和机械接头的不加增塑剂的聚酰胺(PA-U)管道系统. 第2部分: 管线(ISO 16486-2-2020); 德文版本EN ISO 16486-2-2020

This part of ISO 16486 specifies the physical and mechanical properties of pipes made from unplasticized polyamide (PA-U) in accordance with ISO 16486-1, intended to be buried and used for the supply of gaseous fuels. It also specifies the test parameters for the test methods to

Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 2: Pipes (ISO 16486-2:2020); German version EN ISO 16486-2:2020

DIN EN ISO 16486-3:2021 气体燃料供给用塑料管道系统. 带有热熔接头和机械接头的不加增塑剂的聚酰胺(PA-U)管道系统. 第3部分: 配件(ISO 16486-3-2020); 德文版本EN ISO 16486-3-2020

This part of ISO 16486 specifies the physical and mechanical properties of fittings made from unplasticized polyamide (PA-U) in accordance with ISO 16486-1, intended to be buried and used for the supply of gaseous fuels. It also specifies the test parameters for the test methods

Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 3: Fittings (ISO 16486-3:2020); German version EN ISO 16486-3:2020

DIN EN ISO 16486-1:2021 气体燃料供给用塑料管道系统. 带有热熔接头和机械接头的不加增塑剂的聚酰胺(PA-U)管道系统. 第1部分: 总则(ISO 16486-1-2020); 德文版本EN ISO 16486-1-2020

This part of ISO 16486 specifies the requirements of fitness for purpose of the unplasticized polyamide (PA-U) piping system, intended to be buried and used for the supply of gaseous fuels. It also specifies the definitions of electrofusion and butt fusion joints. This part of IS

Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 1: General (ISO 16486-1:2020); German version EN ISO 16486-1:2020

JIS S 2103:2019 家用燃气烹调设备

Gas cooking appliances for domestic use

JIS S 2109:2019 家用燃气热水器

Gas burning water heaters for domestic use

JIS S 2122:2019 家用燃气空间加热器

Gas burning space heaters for domestic use

JIS S 2120:2019 气体阀门

Gas valves

JIS S 2093:2019 家用燃气设备的试验方法

Test methods of gas burning appliances for domestic use

ASME B16.40-2019 气体分配系统中的手动操作热塑性气体截止器和阀门

(a) This Standard covers manually operated thermoplastic valves in nominal valve sizes 1∕2 through 12. These valves are intended for use below ground in thermoplastic fuel gas distribution mains and service lines. The maximum operating pressure (MOP) at which such distribution piping systems may be operated is in accordance with Transportation of Natural and Other Gas by Pipeline; Minimum Safety Standards [49 C.F.R., §192 (2017)] for temperature ranges of −20°F to 140°F (−29°C to 60°C). (b) This Standard sets qualification requirements for each basic valve design as a necessary condition for demonstrating conformance to this Standard. (c) This Standard sets requirements for newly manufactured valves for use in below-ground piping systems for fuel gas [includes synthetic natural gas (SNG)] and liquefied petroleum (LP) gases (distributed as a vapor, with or without the admixture of air) or mixtures thereof. （a） 本标准涵盖标称阀门尺寸为1∕2至12的手动热塑性阀门。这些阀门旨在用于热塑性燃气分配干管和服务管线的地下。此类分配管道系统可操作的最大工作压力 （MOP） 符合管道输送天然气和其他气体;最低安全标准 [49 C.F.R.， §192 （2017）] 适用于 −20°F 至 140°F（−29°C 至 60°C）温度范围。 （b）本标准规定了每种基本阀门设计的资格要求，作为证明符合本标准的必要条件。 （c）本标准规定了用于燃气[包括合成天然气（SNG）]和液化石油（LP）气体（以蒸汽形式分布，有或没有空气混合物）或其混合物的地下管道系统中使用的新制造的阀门的要求。

Manually Operated Thermoplastic Gas Shutoffs and Valves in Gas Distribution Systems

BS EN 12405-1:2018 煤气表. 换算装置. 体积换算

Gas meters. Conversion devices. Volume conversion

DB31/T 300-2018 燃气燃烧器具安全和环保技术要求

本标准规定了燃气燃烧器具的安全技术要求、燃气燃烧器具用连接软管的安全技术要求、室内燃气设施的安全技术要求、燃气燃烧器具的环保技术要求、试验方法，燃气燃烧器具安装和使用场所安全设施的特殊要求。 本标准适用于以符合GB/T 13611规定的城镇燃气为能源的家用和商用燃气燃烧器具及其使用的连接软管和室内燃气设施。不适用于为特定目的设计的燃气燃烧器具和工业用燃气燃烧器具。 本标准是对相关产品在其强制性产品标准基础上增加的安全和环保方面必要的附加要求，本标准应与适用的相关产品标准和建设规范中的强制性条款共同使用。

Technical requirements for safety and environmental protection of gas burning appliances

DIN EN 12480:2018 煤气表.旋转位移式煤气表; 德文版本EN 12480-2018

This European Standard specifies ranges, construction, performances, output characteristics and testing of rotary displacement gas meters (hereinafter referred to as RD meters or simply meters) for gas volume measurement.This European Standard applies to rotary displacement gas meters used to measure the volume of fuel gases of at least the 1st, 2nd and 3rd gas families, the composition of which is specified in EN 437:2003+A1:2009, at a maximum working pressure up to and including 20 bar over an ambient and gas temperature range of at least -10 °C to +40 °C.

Gas meters - Rotary displacement gas meters; German version EN 12480:2018

ISO 23551-4:2018 煤气灯和气体燃烧用具的安全性和控制装置.详细要求.第4部分:自动切断阀用阀检验系统

This document specifies safety, constructional and performance requirements of valve-proving systems (VPS), intended for use with gas burners and gas-burning appliances. It also describes the test procedures for checking compliance with these requirements and provides information necessary for the purchaser and user. This document is applicable to all types of VPS which are used for the automatic detection of leakage in a gas burner section having at least two valves designed in accordance with ISO 23551-1 and which give a signal if the leakage of one of the valves exceeds the detection limit. This document is applicable to VPS with a maximum working pressure up to and including 500 kPa for use in systems using fuel gases. This document is not applicable to VPSs for use in explosive atmospheres. NOTE Provisions for production control are not part of the ISO 23551 series.

Safety and control devices for gas burners and gas-burning appliances - Particular requirements - Part 4: Valve-proving systems for automatic shut-off valves

ISO 23550:2018 燃气和/或燃油燃烧器和电器的安全性和控制设备.一般要求

This document specifies safety, construction, performance and testing requirements for controls for gas burners and gas burning appliances for use with natural gas, manufactured gas or liquefied petroleum gas (LPG). This document applies to controls for use at maximum operating pressures up to and including 500 kPa. This document provides the general requirements that are intended to be the basis for the specific control standards found in the ISO 23551 and ISO 23552 series. These include the following: — automatic and semi-automatic gas valves; — gas thermoelectric flame supervision controls; — gas and oil /air ratio controls; — gas pressure regulators; — manual gas valves; — mechanical gas thermostats; — multifunctional gas controls; — air and gas pressure-sensing devices; — gas vent valves; — gas valve-proving systems. This document covers type testing only. This document is also applicable to Gas Quick Connectors (GQC) for use inside appliances with connections up to, and including DN 25, and a maximum operating pressure up to and including 100 kPa. GQCs include: — tube to tube connections; — tube to control connections; and — tube to fitting connections. This document does not apply to mechanical controls for use with liquid fuels. It is also not applicable to corrosive and waste gases.

Safety and control devices for gas and/or oil burners and appliances - General requirements

BS EN 12480:2018 煤气表.旋转位移煤气表

Gas meters. Rotary displacement gas meters

DIN 4811:2017 液化石油气(LPG)和安全装置用压力调节器.要求

The structural requirements for LPG pressure regulating devices as well as their safety devices are specified in the standard DIN EN 16129 "Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures". The pressure regulating devices with safety devices described in this standard shall also meet the requirements of Annex I of the pressure equipment directive, if applicable. The European standard describes a variety of different LPG pressure regulators used in the individual Member States of the European Union. The connections are given as a standard, and the national regulations apply to the use of the connections. In the individual Member States of the European Union, various connection pressures are set for the connection of LPGs to which the pressure regulators are fixed at the factory. These standards refer to the national operating requirements of the Member States for the cessation of safety equipment. The additional requirements for screwed connections, overpressure safety devices, pressure regulating devices with safety diaphragms and pressure regulators with thermal shut-off devices (TAE) listed in DIN 4811 have been included in DIN EN 16129. For this reason, the relevant sections and appendices of DIN 4811 have been adapted or deleted. In Germany, certain operating regulations exist, For example, low-pressure LPGs are generally operated in a domestic environment at a nominal pressure of 50 mbar according to DIN EN 437. In addition, In the case of commercially used devices, partial higher pressures occur, and when the vapor pressure is relieved during removal from a liquefied-gas storage container, the liquefied-gas pressure has to be released in two stages in certain, fixed stages. In accordance with current operating conditions as well as in accordance with the national requirements for the use of liquef

Pressure regulators for LPG and safety devices - Requirements