Q87 园林动植物及其器械 标准查询与下载

BS EN 14910:2007 园艺机具.步行式内燃机驱动的修剪机.安全

This European Standard deals with all significant hazards, hazardous situations and events relevant to walk-behind trimmers, powered by a combustion engine, with cutting means using non-metallic filament line or freely pivoting non-metallic cutter(s), of which the cutting elements rely on centrifugal force to achieve cutting with the kinetic energy of a single cutting element not exceeding 10 J, designed for cutting grass or similar plant material, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard is not applicable to: a) walk-behind trimmers with cutting means other than those described above; b) self propelled walk-behind trimmers or walk-behind edge trimmers; c) lawnmowers using non-metallic filament line or freely pivoting non-metallic cutting elements with greater than 10 J kinetic energy; NOTE 1 EN 836 applies for machines using non-metallic filament line or freely pivoting non-metallic cutting elements with greater than 10 J kinetic energy. d) motor mowers using metal or other solid cutting elements. NOTE 2 EN 12733 applies for machines using metal or other solid cutting elements. EMC and environmental hazards other than noise have not been considered in this European Standard. This European Standard is not applicable to walk-behind trimmers which are manufactured before the date of its publication as EN. NOTE 3 Lawn trimmers and lawn edge trimmers (electric powered) are dealt with in EN 786, grass trimmers (internal combustion engine powered) are dealt with in EN 11806 and lawn mowers (internal combustion engine powered) are dealt with in EN 836.

Garden equipment - Walk-behind combustion engine powered trimmers - Safety

BS EN 14910:2007+A1:2009 园艺机具.步行式内燃机驱动的修剪机.安全性

This European Standard deals with all significant hazards, hazardous situations and events relevant to walk-behind trimmers, powered by a combustion engine, with cutting means using non-metallic filament line or freely pivoting non-metallic cutter(s), of which the cutting elements rely on centrifugal force to achieve cutting with the kinetic energy of a single cutting element not exceeding 10 J, designed for cutting grass or similar plant material, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard is not applicable to: a) walk-behind trimmers with cutting means other than those described above; b) self propelled walk-behind trimmers or walk-behind edge trimmers; c) lawnmowers using non-metallic filament line or freely pivoting non-metallic cutting elements with greater than 10 J kinetic energy; d) motor mowers using metal or other solid cutting elements.

Garden equipment - Walk-behind combustion engine powered trimmers - Safety

BS EN 60335-2-92:2005 家用和类似用途电器.安全性.第2-92部分:脚踏控制电源操作的草坪松土机和松砂机的详细要求

This clause of Part 1 is replaced by: This European Standard specifies safety requirements and their verification for the design and construction of pedestrian controlled mains operated lawn scarifiers and aerators with a rated voltage being not more than 250 V single phase. This standard does not apply to – non-powered aerators, – vertical axis aerators, – aerators which cut into the soil by means of a reciprocating motion, – battery powered lawn scarifiers and aerators, – aerators cutting in the soil by water pressure. This standard is not applicable to aerators/scarifiers which are manufactured before the date of publication of this document by CENELEC.

Household and Similar Electrical Appliances. Safety. Part 2-92: Particular Requirements for Pedestrian-Controlled Mains-Operated Lawn Scarifiers and Aerators

JIS C 9335-2-100:2007 家用和类似电器.安全.第2-100部分:花园用手持式电动真空鼓风机和真空鼓风机的特殊要求

この規格は，定格電圧が単相250 V以下の，家若しくは家の周囲で使用する又はこれに類する用途の，裁断手段を装備又は装備していない手持形のガーデンバキューム及びガーデンブロワ/バキューム，並びにガーデンブロワの安全性について規定する。

Household and similar electrical appliances -- Safety -- Part 2-100: Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums

KS B ISO 11806:2006 农业和林业机械.便携手持式电动割灌机和割草机的安全要求和试验.第1部分:带有整体内燃机的机械

이 규격에서는 내연기관으로 구동되는 휴대용 손잡이식 예초기와 끈 예초기의 설계 및 제작에

Agricultural and forestry machinery－Portable hand-held combustion engine driven brush cutters and grass trimmers－Safety

SANS 60335-2-77:2006 家用和类似用途电器．安全性．第2．77部分：步行控制的交流电源剪草机的特殊要求

Deals with the safety of pedestrian controlled mains-operated electrical, cylinder or rotary lawnmowers designed primarily for use around the home or for similar purposes, their rated voltage being not more than 250 V single phase.

Safety of household and similar electrical appliances Part 2-77: Particular requirements for pedestrian controlled mains-operated lawnmowers

BS EN 60335-2-77:2006 家用和类似用途电器.安全性.脚控操作电动除草机的特殊要求

To be read in conjunction with BS EN 60335-1, BS EN 836

Household and similar electrical appliances - Safety - Part 2-77: Particular requirements for pedestrian controlled mains-operated lawnmowers

KS B ISO 10517:2005 手持电动树墙修剪机.安全性

이 규격은 1개 이상의 왕복 직선날을 이용하여 주로 울타리와 관목을 다듬기 위한 목적으로

Portable powered hedge trimmers－Definitions, mechanical safety requirements and tests

NF C73-892:2005 家用和类似用途电器设备.安全性.第2-92部分:脚踏控制电源操作的草坪松土机和松砂机的特殊要求.

Household and similar electrical appliances - Safety - Part 2-92 : particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators.

DIN 8471:2005 园艺工具.整地用非电动手持式工具.性能特征、要求和检验

This standard covers non motorized hand-held tools for using in soil or similar purposes in the house garden. It also covers such hand-held tools which are constructed for special purposes, e. g. in agriculture and forestry.#,,#

Garden tools - Non motorized hand-held tools for using in soil - Performance characteristics, requirements and testing

BS EN 13684:2004+A2:2009 园艺设备.步行控制的草坪松砂机及松土机.安全性

This European Standard specifies safety requirements and their verification for the design and construction of pedestrian controlled integrally powered lawn aerators and scarifiers which are designed for re-generating lawns by, for instance, combing out grass, thatch and moss or cutting vertically into the lawn face using tines which rotate about a horizontal axis. It describes methods of elimination or reduction of hazards arising from their use. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices. Throughout this standard, the term “machine” applies to those machines known as aerators, scarifiers, corers, lawn rakes or grass rakes. This standard does not apply to aerators/scarifiers made from a machine falling within the scope of EN 709:1997 when fitted with an aerating/scarifying implement, non-powered aerators, vertical axis aerators or those aerators which cut into the soil by means of a reciprocating motion or by water pressure. The electrical aspects of mains operated machines are covered by EN 60335-1. The safety aspects of batteries other than batteries for starting the engine and the electrical safety aspects of battery powered lawn aerators and scarifiers are not covered by this standard. This standard deals with all significant hazards, hazardous situations and events relevant to scarifiers and aerators, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). Environmental hazards and EMC have not been considered in this standard. This document is not applicable to aerators/scarifiers which are manufactured before the date of publication of this document by CEN.

Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety

BS EN 13684:2004+A3:2009 园艺设备.步行操纵的通气机和松土机.安全性

This European Standard specifies safety requirements and their verification for the design and construction of pedestrian controlled integrally powered lawn aerators and scarifiers which are designed for re-generating lawns by, for instance, combing out grass, thatch and moss or cutting vertically into the lawn face using tines which rotate about a horizontal axis. It describes methods of elimination or reduction of hazards arising from their use. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices. Throughout this standard, the term “machine” applies to those machines known as aerators, scarifiers, corers, lawn rakes or grass rakes.

Garden equipment - Pedestrian controlled aerators and scarifiers - Safety

GA/T 515-2004 公安交通指挥系统工程设计制图规范

本标准规定了公安交通指挥系统工程设计制图的分类、要求和画法。 本标准适用于公安交通指挥系统工程图纸的手工或计算机制图方式绘制。

Specification of the design drawing for the public security traffic command system engineering

BS EN 13683:2003+A1:2009 园艺设备.整体式电动粉碎机/切片机.安全性

This European Standard specifies safety requirements and their verification for the design and construction of hand fed, shredders/chippers with integral power source and with or without vacuum assisted collection which are designed primarily to reduce organic material to smaller pieces. It is only applicable to shredders/chippers that are designed for use outdoors in a stationary position by an operator standing on the ground. It applies to shredders/chippers with feed intake openings in the form of a single opening or an opening divided into a number of segments. The feed intake openings or segments each being of any shape that will fit into a square of 250 mm × 250 mm measured at the relevant safety distance to the cutting means. This standard describes methods of elimination or reduction of hazards arising from the use of shredders/chippers. In addition it specifies the type of information to be provided by the manufacturer on safe working practices. This standard does not cover requirements for: ? units driven by an external power source; ? mobile use of units which can be used in both stationary and mobile modes; ? units with powered discharge intended to broadcast material or load vehicles; ? units with mechanically powered feed intake or attachments; ? units with cutting means of either one or more non-metallic filaments, or one or more non-metallic cutting elements pivotally mounted on a generally circular central drive unit, where these cutting elements rely on centrifugal force to achieve cutting, and have a kinetic energy for each single cutting means of less than 10 J; ? electrical aspects of electrically driven shredders. Environmental hazards and EMC have not been considered in this standard. This standard deals with all significant hazards, hazardous situations and events relevant to shredders/chippers, when they are used as intended (see clause 4). This document is not applicable to shredders/chippers which are manufactured before the date of publication of this document by CEN.

Garden equipment - Integrally powered shredders/chippers - Safety

BS EN 13683:2003+A2:2011 园艺设备.整体式电动粉碎机/切片机.安全性

This European Standard specifies safety requirements and their verification for the design and construction of hand fed, shredders/chippers with integral power source and with or without vacuum assisted collection which are designed primarily to reduce organic material to smaller pieces. It is only applicable to shredders/chippers that are designed for use outdoors in a stationary position by an operator standing on the ground. This standard applies to shredders/chippers with feed intake openings or segments, in this standard referred to as feed safety openings and being of any shape complying with the safety distance requirements of this standard with regard to contact with the cutting means, that in total will fit into a square of 250 mm × 250 mm measured at the plane of the opening(s). This standard describes methods of elimination or reduction of hazards arising from the use of shredders/chippers. In addition it specifies the type of information to be provided by the manufacturer on safe working practices. This standard does not cover requirements for:  units driven by an external power source;  mobile use of units which can be used in both stationary and mobile modes;  units with powered discharge intended to broadcast material or load vehicles;  units with separate mechanically powered feed intake or attachments;  units with cutting means of either one or more non-metallic filaments, or one or more non-metallic cutting elements pivotally mounted on a generally circular central drive unit, where these cutting elements rely on centrifugal force to achieve cutting, and have a kinetic energy for each single cutting means of less than 10 J;  electrical powered and battery-powered shredders/chippers. Environmental hazards and EMC have not been considered in this standard. This standard deals with all significant hazards, hazardous situations and events relevant to shredders/chippers, when they are used as intended (see clause 4). This document is not applicable to shredders/chippers which are manufactured before the date of publication of this document by CEN.

Garden equipment. Integrally powered shredders/chippers. Safety

SANS 60335-2-92:2003 家用及类似用途电器.安全.第2-92部分:对脚踏控制的电源线操作的草坪松土机和通气机的特殊要求

Deals with the safety of pedestrian-controlled mains-operated electrical lawn scarifiers and aerators with rotating cutters for regenerating lawns by, for instance, combing out grass thatch and moss, or by cutting vertically into the lawn face. Designed primarily for use at and around the home or for similar purposes, their rated voltage being not more than 250 V single phase.

Household and similar electrical appliances - Safety Part 2-92: Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators

LY/T 1608-2003 手推式草坪梳草机

本标准规定了手推式草坪梳草机的术语、技术要求、试验方法、检验规则、标志、使用说明书、包装、运输和贮存。 本标准适用于以汽油机为动力的手推式草坪梳草机。

Hand-pushed lawn comber

LY/T 1609-2003 随进式起草皮机

本标准规定了随进式起草皮机的术语、技术要求、试验方法、检验规则、标志、使用说明书、包装、运输和贮存。 本标准适用于以汽油机为动力的随进式起草皮机。

Pedestrian-controlled sod cutter

IEC 60335-2-92:2002/COR1:2003 家用和类似用途电器.安全性.第2-92部分:步行控制的电动草坪松土机和通气机的特殊要求

This standard is Household and similar electrical appliances - Safety - Part 2-92: Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators; Corrigendum 1.

Household and similar electrical appliances - Safety - Part 2-92: Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators

ASTM D6818-02(2009) 草皮加强网基本拉伸特性的标准试验方法

The strip test in this test method is considered satisfactory for acceptance testing of commercial shipments of Turf Reinforcement Mats since the method has been used extensively in the trade for acceptance testing. In case of disagreement arising from differences in reported test values when using this test method for acceptance testing of commercial shipments, the purchaser and the supplier should conduct comparative tests to determine if there is statistical bias between their laboratories. Competent statistical assistance is recommended for the investigation of bias. As a minimum, the two parties should take a group of test specimen which are as homogeneous as possible and are from a lot of material of the type in question. The test specimen should then be randomly assigned in equal numbers to each laboratory for testing. The average results from the two laboratories should be compared using Student''s t-test for unpaired data and an acceptable probability level chosen by the two parties before testing is begun. If bias is found, either its cause must be found and corrected, or the purchaser and the supplier must agree to interpret future results in the light of the known bias.1.1 This test method covers strip test procedures for determining the tensile properties of Turf Reinforcement Mats (TRM). 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are provided for information purposes only. 1.3 This standard does not apply to TRM''s made of composite materials where the component providing the reinforcement cannot be tested for tensile strength with the procedure herein described. In this case, the established ASTM testing method, which is most appropriate for that material, shall be used instead. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Ultimate Tensile Properties of Turf Reinforcement Mats