Q92 水泥与水泥制品设备 标准查询与下载

JC/T 364-2001 环形预应力混凝土电杆钢模

Steel model of circular prestressed concrete pole

JC/T 878.2-2001 水泥工业用硬齿面边缘传动减速机

Case-hardened side driving reducer used in the cement industry

JC/T 878.1-2001 水泥工业用硬齿面中心传动磨机减速机

Case-hardened central driving mill-reducer used in the cement industry

JC/T 877-2001 预应力混凝土输水管辊射机

Mortar coater of prestressed concrete pipes for water

JC/T 878.5-2001 水泥工业用硬齿面辊压机用减速机

Case-hardened reducer for rolling press in the cement industry

JC/T 878.4-2001 水泥工业用硬齿面立式磨机减速机

Case-hardened vertical mill-reducer used in the cement industry

JC/T 878.3-2001 水泥工业用硬齿面窑用减速机

Case-hardened kiln use-reducer in the cement industry

JC/T 825.1-2001 水泥工业用自动控制预加水成球装备双管螺旋喂料机

Automatic control pre-water ball equipment for cement industry-Double pipe screw feeder

JC/T 879-2001 水泥工业用离心通风机技术条件

Technical condition centrifugal ventilator for cement industry

JC/T 825.4-2001 水泥工业用自动控制预加水成球装备微机自动控制系统

Automatic control pre-water ball equipment for cement industry-Microcomputer auto-control system

JC/T 825.2-2001 水泥工业用自动控制预加水成球装备盘式成球机

Automatic control pre-water ball equipment for cement industry-Disc ball machine

BS EN 12629-1:2000+A1:2010 混凝土和硅酸钙结构产品生产设备.安全性.通用要求

1.1 This European Standard applies to machines for the manufacture of constructional products from concrete and/or calcium silicate examples of which are listed in annex A of this part. It gives concepts and general and common requirements for the design, operation and maintenance of such machines. 1.2 This European Standard deals with hazards listed in Clause 4 which can arise during the operation and maintenance, including the interfaces, of the machines for the manufacture of constructional products from concrete and calcium silicate, when carried out as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. Part 2 to 8 of this standard give additional specific requirements and therefore have to be applied together with this part. 1.3 The preparation of concrete and/or calcium-silicate mixture and the transport from the mixer to the manufacturing plant are not part of this European Standard (see EN 12151:2007). The equipment for the transport and handling of formed products, other than the integrated transport system, is not covered by this standard. deleted text 1.4 At the time of drafting, machine specific noise test codes for EN 12629-2 to -8 are not available to fulfill the requirements of 5.7.2 and 7.4.2. When they are available, they will be incorporated in these standards. 1.5 This document is not applicable to machines for the manufacture of constructional products from concrete and/or calcium silicate, which are manufactured before the date of publication of this document by CEN.

Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Common requirements

JC/T 828-2000 石材工业用摆式砂锯机技术条件

Swing sand sawing machines intended to be used in the stone industry

DB31/T 73-1999 水泥磨运行管理与节能监测

Process supervising and moniting for energy saving of cement

ASTM C1005-00 水硬水泥物理试验中质量和体积测定用标准质量与称重器具的标准规范

1.1 This specification covers the minimum requirements for scales, balances, reference masses, and glass graduates used in the physical testing of hydraulic cements.1.2 Requirements for analytical reference masses and balances are not included in this specification, but are to be found in Test Methods C114. The use of restrictive terminology, classes, ranges, etc. has been intentionally avoided to allow the use of this specification by other standards-writing bodies with similar requirements for reference masses and devices for determining mass, if desired.1.3 These requirements are not sufficiently descriptive to be used as the sole specifications for the purchase of reference masses or devices for determining mass without amplification.1.4 Values in SI units shall be obtained by measurement in SI units or by appropriate conversion, using the Rules for Conversion and Rounding given in Standard IEEE/ASTM SI-10, of measurement made in other units.

Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements

JG/T 113-1999 混凝土空心板挤压成型机

本标准规定了混凝土空心板挤压成型机的分类、技术要求、试验方法、检验规则、标志、包装和贮存。 本标准适用于生产混凝土空心板的各种型式挤压机。对于用挤压、振动法生产混凝土柱、梁、桁条、砌块及堵板的各类成型设备可参照执行。

Extruder of concrete hollow slab

JG/T 114-1999 混凝土空心板推挤成型机

本标准规定了混凝土空心板推挤成型机的分类、技术要求、试验方法、检验规则、标志、包装和贮存。 本标准适用于混凝土空心板推挤成型机。对于用推挤法生产混凝土柱、梁、析条、砌块的各类成型设备可参照执行。

Squeezer of concrete hollow slab

JC/T 845-1999 水泥工业用辊压机

Roller press for cement Industry

JC/T 844-1999 水泥工业用立式辊磨机技术条件

Technical condition of vertical roller mill for cement Industry

JC/T 842-1999 水泥工业用单筒冷却机

Rotary cooler for cement