Q92 水泥与水泥制品设备 标准查询与下载
共找到 303 条与 水泥与水泥制品设备 相关的标准，共 21 页
本标准规定了水泥工业用旋转滑片压气机（以下简称压气机）的术语和定义、型号和基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于公称排气压力不大于0.32 MPa的单级、注油、水冷、水泥工业用旋转滑片压气机。
Rotary sliding vane compressor in cement industry
- ICS
- 91.110
- CCS
- Q92
- 发布
- 2011-12-20
- 实施
- 2012-07-01
本标准规定了水泥散装设备电动流量控制阀（以下简称电动流量阀）的型式、标记和基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于水泥散装设备电动流量控制阀。
Electric flow control valve for bulk cement equipment
- ICS
- 91.100
- CCS
- Q92
- 发布
- 2011-12-20
- 实施
- 2012-07-01
本标准规定了水泥散装设备气动开关阀（以下简称气动开关阀）的型式、标记和基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于气动开关阀气动开关阀。
Pneumatic switch valve for bulk cement equipment
- ICS
- 91.100
- CCS
- Q92
- 发布
- 2011-12-20
- 实施
- 2012-07-01
本标准规定了袋装水泥装车机（以下简称装车机)的型式、型号和基本参数、技术要求、试验方法、检验规则以及标志、包装、运输和贮存等。 本标准适用于袋装水泥汽车或火车用装车机。
Sacked cement loader
- ICS
- 91.110
- CCS
- Q92
- 发布
- 2011-12-20
- 实施
- 2012-07-01
本标准规定了水泥工业用离心通风机（以下简称"风机"）的要求、试验方法、检验规则以及标志、包装、运输和贮存等。 本标准适用于含尘浓度不大于100 g/m(标态）的离心通风机。
Centrifugal verntilator technical condition for cement industry
- ICS
- 91.110
- CCS
- Q92
- 发布
- 2011-12-20
- 实施
- 2012-07-01
本标准规定了水泥工业用堆取料机（以下简称堆取料机）的技术要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于圆型预均化堆场对松散物料进行存取的水泥工业用堆取料机。
Technical requirements for stacker reclaimer in cement industry
- ICS
- 91.110
- CCS
- Q92
- 发布
- 2011-12-20
- 实施
- 2012-07-01
JC/T 401《建材机械用铸钢件》的本部分规定了建材机械用高锰钢铸件的牌号、要求、试验方法、检验规则以及标志、包装、运输和贮存等。 本标准适用于建筑机械用高锰钢铸件。
The cast steel for building-material equipment.Part 1:The technological condition of high managanese steel cast
- ICS
- 91.110
- CCS
- Q92
- 发布
- 2011-12-20
- 实施
- 2012-07-01
This part of EN 12629, taken together with EN 12629-1:2000+A1:2010 applies to stationary and mobile equipement for the benched manufacture of prestressed products. The manufacturing bed is a machine with which other associated machines work simultaneously. Moreover, these machines are generally used on beds installed in parallel.
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products; German version EN 12629-7:2004+A1:2010
- ICS
- 91.220
- CCS
- Q92
- 发布
- 2011-03
- 实施
- 2011-03-01
This part of EN 12629 taken together with EN 12629-1-2000+A1-2010,applies to machines for vertical manufacture of pipes, manholes and similar elements from concrete. EN 12629-1-2000+A1-2010 specifies general requirements applicable to machines for the manufacture of constructional products from concrete and calcium-silicate. This document specifies the additional requirements to and/or the deviations from EN 12629-1-2000+A1-2010 specific to the machines it covers.
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis; German version EN 12629-5-1:2003+A1:2010
- ICS
- 91.220
- CCS
- Q92
- 发布
- 2011-02
- 实施
- 2011-02-01
This part of EN 12629 taken together with EN 12629-1-2000+A1-2010,applies to machines for vertical manufacture of pipes, manholes and similar elements from concrete. EN 12629-1-2000+A1-2010 specifies general requirements applicable to machines for the manufacture of constructional products from concrete and calcium-silicate. This document specifies the additional requirements to and/or the deviations from EN 12629-1-2000+A1-2010 specific to the machines it covers.
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-2: Pipe making machines manufacturing in the horizontal axis; German version EN 12629-5-2:2003+A1:2010
- ICS
- 91.220
- CCS
- Q92
- 发布
- 2011-02
- 实施
- 2011-02-01
This part of EN 12629, taken together with EN 12629-1-2000+A1-2010, applies to machines for the manufacture of constructional products of calcium-silicate or concrete, where the mould(s) is (are) mounted on a turning or slide table. The motive power for compressing the mixture is effected either mechanically (Annexes A,B),or hydraulically(Annexes C and D).
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 3: Slide and turntable machines; German version EN 12629-3:2002+A1:2010
- ICS
- 91.220
- CCS
- Q92
- 发布
- 2011-02
- 实施
- 2011-02-01
This part of EN 12629 taken together with EN 12629-1-2000+A1-2010,applies to pipe prestressing machines as defined in Clause 3. EN 12629-1-2000+A1-2010 specifies general requirements applicable to machines for the manufacture of constructional products from concrete and calcium-silicate. This document specifies the additional requirements to and/or the deviations from EN 12629-1-2000+A1-2010 specific to the machines it covers.
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe coating machines; German version EN 12629-5-4:2003+A1:2010
- ICS
- 91.220
- CCS
- Q92
- 发布
- 2011-02
- 实施
- 2011-02-01
This part of EN 12629 taken together with EN 12629-1-2000+A1-2010,applies to concrete roof tile making machines. EN 12629-1-2000+A1-2010 specifies general requirements applicable to machines for the manufacture of constructional products from concrete and calcium-silicate.
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 4: Concrete roof tile making machines; German version EN 12629-4:2001+A1:2010
- ICS
- 91.220
- CCS
- Q92
- 发布
- 2011-02
- 实施
- 2011-02-01
This part of EN 12629 taken together with EN 12629-1-2000+A1-2010,applies to pipe prestressing machines as defined in Clause 3. EN 12629-1-2000+A1-2010 specifies general requirements applicable to machines for the manufacture of constructional products from concrete and calcium-silicate. This document specifies the additional requirements to and/or the deviations from EN 12629-1-2000+A1-2010 specific to the machines it covers.
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines; German version EN 12629-5-3:2003+A1:2010
- ICS
- 91.220
- CCS
- Q92
- 发布
- 2011-02
- 实施
- 2011-02-01
This part of EN 12629, taken together with EN 12629-1:2000+A1:2010 applies to hydraulic machines for the manufacture of bricks, blocs and elements of calcium-silicate.
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete); German version EN 12629-8:2002+A1:201
- ICS
- 91.220
- CCS
- Q92
- 发布
- 2011-02
- 实施
- 2011-02-01
This part of EN 12629 taken together with EN 12629-1-2000+A1-2010,applies to stationary and mobile equipment for the manufacture of precast reinforced products as defined in Chause 3 and applies to these machines also when used for the manufacture of non-reinforced moulded products. EN 12629-1-2000+A1-2010 specifies general requirements applicable to machines for the manufacture of constructional products from concrete and calcium-silicate. This document specifies the additional requirements to and/or the deviations from EN 12629-1-2000+A1-2010 specific to the machines it covers.
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products; German version EN 12629-6:2004+A1:2010
- ICS
- 91.220
- CCS
- Q92
- 发布
- 2011-02
- 实施
- 2011-02-01
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements; German version EN 12629-1:2000+A1:2010
- ICS
- 91.220
- CCS
- Q92
- 发布
- 2011-01
- 实施
- 2011-01-01
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2: Block making machines; German version EN 12629-2:2002+A1:2010
- ICS
- 91.220
- CCS
- Q92
- 发布
- 2011-01
- 实施
- 2011-01-01
本标准规定了水泥振动筛的型式、型号与基本参数、技术要求、试验方法、检验方法、检验规则及标志、包装、运输和贮存。 本标准适用于水泥振动筛。
Cement vibrating screen
- ICS
- CCS
- Q92
- 发布
- 2010-11-22
- 实施
- 2011-03-01
JC/T 878的本部分规定了水泥工业用硬齿面边缘传动磨机减速机的分类与标记、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于水泥工业用硬齿面减速机中的边缘传动磨机减速机，其他行业可参照使用。
Case-hardened reducer used in cement industry Part 2:reducer for side drive tube mill
- ICS
- 91.110
- CCS
- Q92
- 发布
- 2010-11-22
- 实施
- 2011-03-01
