R12 货运 标准查询与下载

ISO/TS 17263:2003 自动车辆和设备识别.货物联运.系统参数

1 General This Technical Specification establishes an AEI-System based on radio frequency technologies. This system is intended for general application in RTTT/TICS. It allows the transfer of the identification codes and further information about equipment and vehicles used in intermodal transport into such RTTT/TICS and information systems related to Intermodal Transport processes. Within the intermodal context of the RTTT/TICS Sector, AEI systems have the specific objective of achieving an unambiguous identification of an ITU or related equipment or vehicle or item used in intermodal transport, and to make that identification automatically. Vehicles will be considered and handled under Intermodal aspects as Intermodal Equipment". Therefore a differentiation between AEI and AVI systems under the purpose of this standard is not required. This Technical Specification is specifically aimed at DSRC-type air interfaces. The requirement and test methods may not apply for Intermodal AEI systems using long range communications such as Cellular Networks or Satellite, or vicinity communication such as inductively coupled antennas. The interoperability across the air interface (reference point Delta) is outside the scope of this Technical Specification. Please see CEN ISO/TS 17264 Automatic Vehicle and Equipment Identification (AVI/AEI) -AVI/AEI Interfaces (under preparation). 2 Aim The aim of this standard is to define, describe and specify the System Parameters related to an intermodal AEI system to provide an enabling Standard, which, whilst allowing the system specifier to determine the performance levels and operating conditions, provides a framework for interoperability. Therefore this Technical Specification specifies: a) parameters and requirements of the identification system itself b) performance criteria necessary to ensure consistent and reliable operation of AEI systems within international transport processing c) requirements of the performance and the position of the electronic devices (tag) when installed on intermodal equipment d) requirements for the installation of readers, and performance data related to these components. NOTE: These parameters of an AEI system shall be identical, compatible or interoperable world-wide in respect of systems complying to this Pre-Standard. Yet it is recognised that, at the implementation level, there may be requirements for regional or operational differences in the performance levels achieved against these parameters. 3 Pre-requisite Any system to read identity and related data has to be based on a standardised system to allocate an unambiguous identity to each item, vehicle, load unit or equipment as defined in CEN ISO/TS 17262 Automatic vehicle and equipment identification - Intermodal goods transport - Numbering and data structures.

Automatic vehicle and equipment identification - Intermodal goods transport - System parameters

BS EN 12642:2001 道路车辆上货物的安全.工业车辆的车体结构.最小要求

This standard specifies minimum requirements for the body structure (e.g. side walls, end walls) and pro-vides suitable test methods, to make sure, that the body structure of the vehicle is able to take over the securing of cargo, if the cargo is not secured by using lashing materials. This standard is valid for the body structure on commercial vehicles and trailers with a maximum total mass (R) over 3,5 t.

Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements

JT/T 436-2001 鱼粉船舶运输安全技术要求

本标准规定了鱼粉的船舶运输安全的基本技术要求，适用于我国进口第9类鱼粉、联合国编号2216的远洋船舶运输:第4.2类鱼粉远洋船舶运输的要求参照《国际海运危规》的规定。

Specification of shipping safety for fish meal transportation

DIN EN 12522-2:1998 搬家服务.私人搬家.第2部分:服务条款

The document specifies the minimum qualitative and quantitative rules and characteristics of the provision of a furniture removal service being defined in DIN EN 12522-1. It also specifies the requirements for a quality approach. The document applies only to those activities which relate to the mobility of private individuals. requirements for a quality approach. The document applies only to those activities which relate to the mobility of private individuals where the contract is entered into by an individual or by an employer or relocation agent when the latter requires the moving of personal property, generally consisting of non commercial property and/or property which is in current use.#,,#

Furniture removal activities - Furniture removal for private individuals - Part 2: Provision of service; German version EN 12522-2:1996

DIN EN 12522-1:1998 家具搬运服务业.私人搬具搬运.第1部分:服务规范

The document specifies the minimum qualitative and quantitative rules and characteristics of a furniture removal service. It also specifies the principles which govern the general conditions of contract of the furniture removal service within the most appropriate legal and contractual framework within each of the member states. The document applies only to those activities which relate to the mobility of private individuals.

Furniture removal activities - Furniture removal for private individuals - Part 1: Service specification; German version EN 12522-1:1998

JT/T 328-1997 货运半挂车通用技术条件

本标准规定了货运半挂车的技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于道路运输的货运半挂车(以下简称半挂车)。

Technical requirements for freight semitrailer

JT/T 316-1997 货运挂车产品质量分等

本标准规定了货运挂车产品质量等级的划分、评定原则及质量检测方法。 本标准适用于在公路及城市道路上使用的汽车货运全挂车、半挂车、集装箱半挂车。

Grading for freight trailers product quality

JT/T 242-1995 汽车运输企业轮胎技术管理台帐

本标准规定了轮胎技术管理台帐的种类、格式、印刷及使用要求等，适用于汽车运输企业机务管理。

The bills of tyres technology management for trucking company

JT/T 3143-1990 汽车货物运输质量标准

Service standard of motor truck freight transportation

JT 2019-1990 油船作业安全技术要求

Oil tanker operation safety technical requirements