R17 公路车辆维修设备 标准查询与下载

BS PAS 43:2012 车辆故障,修复和移动操作的安全工作.管理系统规范

Safe working of vehicle breakdown, recovery and removal operations. Management system specification

SAE J286-2012 SAE 2 号离合器摩擦试验机指南

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This SAE Recommended Practice is intended as a guide toward implementation of a standard practice but may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering its use. The SAE No. 2 Friction Test Machine is used to evaluate the friction characteristics of automatic transmission plate clutch with automotive transmission fluids. It can also be used to conduct durability tests on wet friction systems. This document is intended for common use by both suppliers and end users to deine minimum test machine requirements to allow objective comparisons for wet friction material system performance.

SAE No. 2 Clutch Friction Test Machine Guidelines

SAE J2888-2012 汽车制冷剂系统维修设备用R-1234yf维修软管,配件和耦合器

This SAE Standard covers fittings, couplers, and hoses intended for connecting service hoses from mobile airconditioning systems to service equipment such as charging, recovery and recycling equipment. This specification covers service hose fittings and couplers for MAC service equipment service hoses, per SAE J2843 and SAE J2851, from mobile air-conditioning systems to service equipment such as manifold gauges, vacuum pumps, and airconditioning charging, recovery and recycling equipment. The purpose of this SAE Standard is to establish specific but unique fittings, couplers, and hoses for service equipment used in maintaining R-1234yf systems. This is necessary to avoid cross mixing of refrigerant and lubricants from other refrigerant systems. This standard applies only to systems specifically designed to use R-1234yf. Hermetically sealed appliances and refrigerated cargo systems are not covered by this document.

R-1234yf Service Hose, Fittings and Couplers for Mobile Refrigerant Systems Service Equipment

SAE J2951-2011 底盘功率机试验驱动器质量评定

This SAE Recommended Practice establishes uniform procedures for evaluating conformity between the actual and target drive speeds for chassis dynamometer testing utilizing standard fuel economy and emissions drive schedules.

Drive Quality Evaluation for Chassis Dynamometer Testing

SAE J1939/13-2011 外接诊断接头

SAE J1939-13 specifies the diagnostic connectors used for off-board connection to a vehicle's SAE J1939 communication links. The defined diagnostic connectors support connection to the twisted shielded pair media (SAE J1939-11), the Reduced Physical Layer unshielded twisted pair (SAE J1939-15), the unshielded twisted pair of SAE J1939-14, as well as the twisted unshielded quad media (ISO 11783-2).

Off-Board Diagnostic Connector

BS EN 15518-2:2011 冬季维修设备 道路气象信息系统 道路天气 推荐观测和预报

This European Standard specifies the frequency, resolution and content of road weather observation and forecast products for a Road Weather Information Systems (RWIS).

Winter maintenance equipment. Road weather information systems. Road weather. Recommended observation and forecast

BS EN 15518-3:2011 冬季维修设备.道路气象信息系统.固定设备的测量值要求

This European Standard specifies the terminology and performance requirements for all components of stationary equipment within a Road Weather Information Systems (RWIS).

Winter maintenance equipment. Road weather information systems. Requirements on measured values of stationary equipments

SAE J2857-2011 混血III的3岁儿童假人使用者手册

This user's manual covers the Hybrid III 3-year old child test dummy. The manual is intended for use by technicians who work with this test device. It covers the construction and clothing, assembly and disassembly, available instrumentation, external dimensions and segment masses, as well as certification and inspection test procedures. It includes guidelines for handling accelerometers, guidelines for flesh repair, and joint adjustment procedures. Finally, it includes drawings for some of the test equipment that is unique to this dummy.

Hybrid III 3-Year Old Child Dummy User's Manual

SAE J600-2011 前灯目标试验机

This SAE Recommended Practice provides laboratory test procedures for testing headlamp aim test machines to verify their ability to aim or to inspect the aim of headlamps, fog lamps, and auxiliary high beam lamps. This specification does not apply to aiming devices of the kind covered by SAE J602. This specification doe snot apply to motorcycle headlamps.

Headlamp Aim Test Machines (Stabilized Type)

SAE J602-2011 机械定向前灯装置的前灯定向装置

This document applies to the requirements of a device used in the field and inspection stations to aim and check aim of mechanically aimable headlamp units. The purpose of this document is to provide a laboratory test procedure to determine whether the devices under test are capable of accurately positioning headlamp units using their aiming pads or aiming/seating plane and maintaining their accuracy in service within the tolerances designated in this document.

Headlamp Aiming Device for Mechanically Aimable Headlamp Units (Stabilized Type)

SAE J2911-2011 汽车空调系统组件,维修设备和维修技术员培训会议SAE J标准的要求检定用规程

This SAE Standard provides manufacturers, testing facilities and providers of technician training with a procedure for certifying compliance with the appropriate standards. Manufacturers who advertise their products as Certified to an SAE J standard shall follow this procedure. Certification of a product is voluntary, however, this certification process is mandatory for those advertising meeting SAE Standard(s) requirements. Only certifying to this standard allows those claiming compliance to advertise that their product (unit), component, or service meets all requirements of the specific SAE standard. Certification of compliance to this and the appropriate standard and use of the SAE label on the product shall only be permitted after all the required information has been submitted to SAE International and it has been posted on the SAE web site. This process is mandatory for those advertising as being Certified to SAE JXXXX (appropriate SAE Standard) requirements or any advertising or labeling language that implies such certification. SAE International will post the results in the official SAE on-line database. SAE J2911 provides manufacturers, testing facilities, and technician training providers with a procedure for certifying compliance with the appropriate SAE standard. Regulatory agencies will also have access to the SAE International public posting of the results in the official SAE database.

Procedure for Certification that Requirements for Mobile Air Conditioning System Components, Service Equipment, and Service Technician Training Meet SAE J Standards

ANSI/NFPA 30A-2011 电动机燃料分配设备及其修理厂代码

1.1* Scope. 1.1.1 This code shall apply to motor fuel dispensing facilities; marine/motor fuel dispensing facilities; and motor fuel dispensing facilities located inside buildings, at fleet vehicle motor fuel facilities, and at farms and isolated construction sites. This code shall also apply to motor vehicle repair garages. 1.1.2* This code shall not apply to those motor fuel dispensing facilities where only liquefied petroleum gas (LP-Gas), liquefied natural gas (LNG), or compressed natural gas (CNG) is dispensed as motor fuel. A.1.1.2 See NFPA 52, Vehicular Fuel Systems Code, and NFPA 58, Liquefied Petroleum Gas Code, for requirements for facilities where only these fuels are dispensed. A.1.1 This code, known as the Code for Motor Fuel Dispensing Facilities and Repair Garages, is recommended for use as the basis for legal regulations. Its provisions are intended to reduce the hazards of motor fuels to a degree consistent with reasonable public safety, without undue interference with public convenience and necessity. Thus, compliance with this code does not eliminate all hazards in the use of these fuels. See the Flammable and Combustible Liquids Code Handbook for additional explanatory information.

Code for Motor Fuel Dispensing Facilities and Repair Garages

BS DD CEN/TS 15366:2009 冬季和公路服务区的维修设备.道路用固体吸附剂

This Technical Specification is a product specification standard. It applies to bulk spreadable products for absorbing hydrocarbons, mineral oils and similar liquids from road surfaces or traffic areas. Each country may add usage regulations.

Winter and road service area maintenance equipment - Solid absorbents intended for road usage

DIN EN 15436-4:2010 公路服务区的维修设备.第4部分:经由用户的机器配送承兑.德文版本EN 15436-4-2009

This document applies to mowers and mechanical brush cutters used by road maintenance services. It provides harmonized expressions / characteristic parameters by means of which operators can specify the above-mentioned equipment's performance to suppliers. The document also describes procedures for testing delivered equipment's compliance with operator requirements. This standard applies to:- mowers and - mechanical brush cuttersused by road maintenance services.The standard provides harmonized expressions/characteristic parameters by means of which operators can specify the above-mentioned equipment's performance to suppliers. The standard also describes procedures for testing delivered equipment's compliance with operator requirements.

Road service area maintenance equipment - Part 4: Delivery acceptance of the machines by the users; German version EN 15436-4:2009

ISO/PAS 3930:2009 测量机动车尾气排放仪器.计量和技术要求.计量控制和性能试验

Instruments for measuring vehicle exhaust emissions - Metrological and technical requirements; Metrological control and performance tests (First Edition)

SAE JA1011-2009 可靠性为中心的维修(RCM)过程评价标准

This SAE Standard for Reliability Centered Maintenance (RCM) is intended for use by any organization that has or makes use of physical assets or systems that it wishes to manage responsibly. RCM is a specific process used to identify the policies which must be implemented to manage the failure modes which could cause the functional failure of any physical asset in a given operating context. This document is intended to be used to evaluate any process that purports to be an RCM process, in order to determine whether it is a true RCM process. This document supports such an evaluation by specifying the minimum characteristics that a process must have in order to be an RCM process.

Evaluation Criteria for Reliability-Centered Maintenance (RCM) Processes

DIN CEN/TS 15436-3:2009 公路服务区的维修设备 第3部分:分类

Road service area maintenance equipment - Part 3: Classification; German version CEN/TS 15436-3:2009

BS DD CEN/TS 15436-3:2009 道路服务区维护设备.第3部分:分类

This Technical Specification defines the classification criteria of the road service area maintenance equipment described in the scope of EN 15436-1 and used for:  grass cutting and brushcutting;  mechanical plant cutting. This equipment is mounted on self-propelled carrying vehicles and is intended, on the one hand, for cutting and shredding grass and brushwood, and, on the other hand, for trimming trees, saplings and bushes in road service areas.

Road service area maintenance equipment Part 3: Classification

SAE J2876-2009 混合III 50th插入式配件模拟装置的低速弯头滑块试验规程

This procedure establishes a recommended practice for performing a Low Speed Knee Slider test to the Hybrid III 50thMale Anthropomorphic Test Device (ATD or crash dummy). This test was created to satisfy the demand from industry tohave a certification test which produces similar results to an actual low energy automotive impact test. An inherentproblem exists with the current certification procedure because the normal (2.75 m/s) knee slider test has test corridors that do not represent typical displacements seen in these low energy impact tests. The normal test corridors specify aforce requirement at 10 mm and at 18 mm, while the low speed test needs to have a peak displacement around 10 mm.1.1 PurposeThe intent of this recommended practice is to develop a low speed knee slider test procedure for the H-III50M dummy witha 10 mm deflection range.

Low Speed Knee Slider Test Procedure for the Hybrid III 50th Male Dummy

NF R63-105/IN1*NF EN 1494/IN1:2009 移动式或可折卸式千斤顶和相关升降设备

Mobile or movable jacks and associated lifting equipment.