R19 公路养路机械及其使用与维修 标准查询与下载

DIN SPEC 1155:2010 冬季公路服务区的维修设备.道路用途用固体吸附剂; 德文版本 CEN/TS 15366-2009

This document specifies the terminology and the test methods of solid absorbents for road usage.

Winter and road service area maintenance equipment - Solid absorbents intended for road usage; German version CEN/TS 15366:2009

JJG(交通) 053-2009 摆式摩擦系数测定仪

本规程适用于摆式摩擦系数测定仪(以下简称摆式仪)的首次检定、后续检定和使用中的检验。

Pendulum Friction Tester

JJG(交通) 054-2009 加速磨光机

本规程适用于加速磨光机(以下简称磨光机)的首次检定、后续检定和使用中的检验。

Accelerated Polishing Machine

NF P98-707:2009 道路施工和维护设备.碳氢粘合剂涂抹器/喷射器.术语和名称

Road construction and maintenance equipment - Hydrocarbon binder spreader/sprayer - Terminology and nomenclature.

NF P98-744-5:2009 公路建设和养护设备.材料生产车间用连续给料设备的设置的现场校准和校验.第5部分:干散材料称量配料机.实物称重试验

Road construction and maintenance equipment - On-site calibration and verification of the settings of continuous dosing apparatus of material production plants - Part 5 : dry bulk weighing dosing machine - Substance weighing test.

NF P98-744-2:2009 公路建设和养护设备.材料生产车间用连续给料设备的设置的现场校准和校验.第2部分:集料称量配料机

Road construction and maintenance equipment - On-site calibration and verification of the settings of continuous dosing apparatus of material production plants - Part 2 : aggregate weighing dosing machine.

NF P98-744-3:2009 公路建设和养护设备.材料生产车间用连续给料设备的设置的现场校准和校验.第3部分:集料体积测定配料机

Road construction and maintenance equipment - On-site calibration and verification of the settings of continuous dosing apparatus of material production plants - Part 3 : aggregate volumetrique dosing machine.

NF P98-744-6:2009 道路建设及养护设备.材料生产厂连续配制设备的现场校正及检验.第6部分:材料生产厂连续配制沥青设备的现场校正及检验

Road construction and maintenance equipment - On-site calibration and verification of the settings of continuous dosing apparatus of material production plants - Part 6 : on-site calibration and verification of the settings of continuous asphalt dosing ap

NF P98-744-1:2009 公路建设和养护设备.材料生产车间用连续给料设备的设置的现场校准和校验.第1部分:带式输送机用皮带流量计

Road construction and maintenance equipment - On-site calibration and verification of the settings of continuous dosing apparatus of material production plants - Part 1 : belt flow meter for belt conveyor.

DIN EN 15432:2008 冬季公路服务区的维修设备.前部安装的设备.可交换性

This European Standard specifies the requirements for the various elements of carrying vehicles to ensure interchangeability between a vehicle and different equipments that are frontally mounted. It specifies certain interchangeability dimensions of the front mounting plate, including its height above the ground, as well as the locations of coupling devices for electrical and hydraulic connections and for mechanical power take off (PTO). This European Standard specifies two different classes of mounting plates in order to cover road vehicles, having a maximum design total mass higher than 3,5 t, of the greatest possible variety (commercial vehicles, multi-purpose vehicles, communal vehicles .... ), which are capable of carrying front-mounted equipments for winter maintenance and for road service area maintenance. This European Standard specifies, with regard to electrical and hydraulic connections and to PTO, only location areas, clearance spaces and preferred layout in order to ensure interchangeability. Requirements applying to connectors, coupling devices and PTO splines are given in EN 15431. Normative Annex A specifies provisions for an advanced front coupling system that is able to allow for mounting and demounting equipments without the use of tools. Users having to address specific needs (e.g. extreme weather conditions) may require the vehicle be fitted with such automatic coupling system. Normative Annex B gives provisions for a compact and light front mounting plate intended for combined road and off-road applications.

Winter and road service area maintenance equipments - Front-mounted equipments - Interchangeability; English version of DIN EN 15432:2008-05

NF P98-912:2008 冬季公路服务区的维修设备.前部安装的设备.可交换性.

Winter and road service area maintenance equipments - Front-mounted equipments - Interchangeability.

DIN EN 15430-1:2008 冬季公路服务区的维修设备.数据采集和传输.第1部分:车内数据采集

This European Standard specifies a standardized protocol for downloading data from the equipment control box to an in-vehicle board computer to ensure interchangeability between a vehicle and different equipments that the same vehicle can carry. It specifies the interface connection as well as variables, records and reports which permit standardized protocol to cover applications with the greatest possible variety of equipments for performing winter maintenance and road service area maintenance.

Winter and road service area maintenance equipments - Data acquisition and transmission - Part 1: In vehicle data acquisition; English version of DIN EN 15430-1:2008-03

BS EN 15432:2008 冬季公路服务区的维修设备.前部安装的设备.可交换性

This European Standard specifies the requirements for the various elements of carrying vehicles to ensure interchangeability between a vehicle and different equipments that are frontally mounted. It specifies certain interchangeability dimensions of the front mounting plate, including its height above the ground, as well as the locations of coupling devices for electrical and hydraulic connections and for mechanical power take off (PTO). This European Standard specifies two different classes of mounting plates in order to cover road vehicles, having a maximum design total mass higher than 3,5 t, of the greatest possible variety (commercial vehicles, multi-purpose vehicles, communal vehicles, …), which are capable of carrying front-mounted equipments for winter maintenance and for road service area maintenance. This European Standard specifies, with regard to electrical and hydraulic connections and to PTO, only location areas, clearance spaces and preferred layout in order to ensure interchangeability. Requirements applying to connectors, coupling devices and PTO splines are given in EN 15431. Normative Annex A specifies provisions for an advanced front coupling system that is able to allow for mounting and demounting equipments without the use of tools. Users having to address specific needs (e.g. extreme weather conditions) may require the vehicle be fitted with such automatic coupling system. Normative Annex B gives provisions for a compact and light front mounting plate intended for combined road and off-road applications.

Winter and road service area maintenance equipments - Front-mounted equipments - Interchangeability

BS EN 15431:2008 冬季公路服务区的维修设备.动力系统及其相关控制.可互换性和性能要求

This document applies to power systems equipped for the operation and able to drive implements and attachments such as snow ploughs and/or spreaders on winter service vehicles or mowers on road service area maintenance vehicles, equipped with front-mounting plates according to EN 15432. The purpose of this standard is to ensure interchangeability of vehicles and implements. The minimum requirements on the performance and the components of the hydraulic system as well as the kind, the size and the location of the connecting elements between the vehicle and the implement are specified in this standard. This standard does not deal with airport equipment. This standard does not cover applications, where the implements need a continuous hydraulic oil flow exceeding 45 l/min.

Winter and road service area maintenance equipments - Power system and related controls - Interchangeability and performance requirements

BS EN 15430-1:2007 冬季和公路服务区的维修设备.数据采集和传输.第1部分:车内数据采集

This European Standard specifies a standardized protocol for downloading data from the equipment control box to an in-vehicle board computer to ensure interchangeability between a vehicle and different equipments that the same vehicle can carry. It specifies the interface connection as well as variables, records and reports which permit standardized protocol to cover applications with the greatest possible variety of equipments for performing winter maintenance and road service area maintenance.

Winter and road service area maintenance equipments - Data acquisition and transmission - Part 1: In vehicle data acquisition

JT/T 659-2006 混凝土超声检测仪

本标准规定了水泥混凝土超声检测仪器结构及等级划分、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于检测水泥混凝土强度和内部缺陷的超声检测仪。

Ultrasonic test instrument of concrete

JJG(交通) 064-2006 沥青混合料拌和机

本规程规定了沥青混合料拌和机的首次检定、后续检定和使用中检验。

Asphalt Mixture's Mixing Machine

JJG(交通) 067-2006 道路石油沥青针入度试验仪

本规程规定了道路石油沥青针入度试验仪的首次检定、后续检定和使用中的检验。

The penetration test apparatus of petroleum bituminous for road

JJG(交通) 066-2006 马歇尔稳定度试验仪

本规程规定了沥青混合料马歇尔试验仪（以下简称试验仪）的首次检定、后续检定和使用中检验。

Marshall test machine for bituminous mixtures

JJG(交通) 065-2006 沥青混合料马歇尔击实仪

本规程规定了沥青混合料马歇尔标准击实仪和马歇尔大型击实仪的首次检定、后续检定和使用中检验。

Asphalt Mixture's Marshall Compaction Test Apparatus