共找到 135 条与 船用主辅机及管路附件维护修理 相关的标准,共 9 页
本标准规定了船用电动起锚机和电动起货机的修理、试验和验收的技术要求。 本标准适用于内河船舶电动起锚机和电动起货机的修理。
Technical requirements for repairing electric anchor winch and electric cargo crane of ship
本标准规定了船用电动系泊绞盘及其减速箱的修理、试验和验收的技术要求。 本标准适用于内河船舶电动系泊绞盘及其减速箱的修理。
Technical requirements for repairing electric mooring capstans and its speed-down boxes of ship
本标准规定了船用叶片油泵的修理、安装、试验与验收技术要求。 本标准适用于内河船用中、低压叶片油泵的修理。
Technical requirements for repairing impeller pumps of ship
本标准规定了船用齿轮油泵的修理、试验与验收的技术要求。 本标准适用于内河船用齿轮油泵的修理。
Technical requirements for repairing gear pumps of ship
本标准规定了中小型往复式氟利昂压缩机修理、试验及验收要求。 本标准适用于内河船用中小型往复式氟利昂压缩机的修理。
Technical requirements for repairing freon compressors of ship
本标准规定了船用旋涡水泵的修理、试验和验收的技术要求。 本标准适用于内河船舶旋涡水泵的修理。
Technical requirements for repairing vortex water pumps of ship
本标准规定了船用立式三螺杆泵和卧式双螺杆泵的修理、试验和验收的技术要求。 本标准适用于内河船舶立式三螺杆泵和卧式双螺杆泵的修理。
Technical requirements for repairing screw pumps of ship
本标准规定了工程船液压系统修理调试技术要求。 本标准适用于绞吸、耙吸、吹泥、打桩、链斗等工程船液压系统的修理调试。
Technical requirements for testing hydraulic system of repairing working ship
本标准规定了工程船舶液压元件修前勘验、修理及修后安装、试验等要求。 本标准适用于工程船舶液压元件修理,亦可作为其他船舶液压元件修理参考。
Technical requirements for repairing hydraulic components and units of working ship
本标准规定了渔船170系列柴油机修理技术要求、检验规则、试验方法等。 本标准适用于渔船170系列柴油机。其他用途170系列柴油机的修理亦可参考。
Maintenance technical specification for 170 series diesel engine of fishing vessel
Marine operation code of spray coating and flame welding-on
本标准规定了船用中高压子母叶片泵的勘验、修理、装配和试验技术要求。 本标准适用于同轴双联双作用叶片泵的修理,也适用于单联双作用叶片泵的修理。
Technical requirements for repairing marine hydraulic primary-secondary vane pump
本标准规定了船舶铁梨木艉轴承的铁梨木板条单块成形和成组成形的加工、镶装与检查验收的技术要求。 本标准适用于钢质船舶铁梨木艉轴承的铁梨木板条镶装后不再镗孔的板条换新。
Technical requirements for renewing the lignum vitae of ship's stern bearing
本标准规定了渔船固定式导流管和转动式导流管的制造及安装技术要求、试验方法和埠验规则。 本标准适用于渔船导流管的制造及安装检验。
Technical requirements for making and working of fishing vessel honeycomb duct
本标准规定了渔船主机前端齿轮箱船上安装技术要求。 本标准适用于渔船主机前端输出配套安装的齿轮箱的安装及检验。
Technique requirements for setting of main diesel engine lip surface gercase of fishing vessel
本标准规定了船舶液压系统修理清洗技术要求。 本标准适用于民用船舶液压设备大修或长期运作导致油液污染度超过规定时的系统清洗。
Technical requirements on cleaning hydraulic system in ship-repairing
本标准规定了船用柴油机涡轮增压器修理总则、零部件修理要求和增压器修复后的试验及其他技术要求。 本标准适用于民用船舶轴流式和径流式涡轮增压器(以下简称增压器)的修理(见图1,2)。
The technical requirements for repairing turbo-charger in the marine diesel engine
本标准规定了船舶舵系修理前的勘验,舵系主要零部件的修理与装配,以及修理后的4 和提交文件。 本标准适用于内河钢质船舶舵系的修理,海洋船舶亦可参照执行。
Technical requirement on the steering repair of inland river ship
本标准规定了船舶螺旋桨修理前的勘验,桨叶表面的缺陷、桨叶断块、弯曲的修理,以及修复后的验收与应提交的文件。 本标准适用于直径小于4500mm的内河船舶金属螺旋桨的修理。海洋船舶及其他类型船舶亦可参照执行。
Technical requirement on the propeller repair of inland river ship
本标准规定了船舶轴系修理前的勘验;轴系主要零部件的修换;轴系的装配与校中以及修复后的验收与应提交的文件。 本标准适用于内河钢质船舶轴系的修理。海洋船舶及其它类型船舶亦可参照执行。
Technical requirement on the shaft repair of inland river ship
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号