S30 机车车辆通用标准综合 标准查询与下载
共找到 393 条与 机车车辆通用标准综合 相关的标准，共 27 页
Design specifications for driver's cab of electric multiple units
- ICS
- ICS45.060.01
- CCS
- S30
- 发布
- 2017-11-19
- 实施
- 2018-06-01
Railway applications - Rolling stock - Electronic equipment
- ICS
- 45.040;45.060.01
- CCS
- S30
- 发布
- 2017-10-13
- 实施
- 2018-07-06
This European Standard defines a set of reference masses for specifying the requirements for the design, testing, acceptance, marking, delivery and operation of rail vehicles. The reference masses defined in this document are as follows: dead mass; design mass in working order; design mass under normal payload; design mass under exceptional payload; operational mass in working order; operational mass under normal payload; These reference masses are defined with respect to the whole vehicle, but they can also apply to a specific system or component. The specification of values for tolerances applicable to reference masses is not in the scope of this standard. Tolerances can be required by an application standard. Additional loadings due to environmental factors, for example snow and retained or absorbed rainwater, are not in the scope of this European Standard.
Railway applications - Vehicle reference masses; German version EN 15663:2017
- ICS
- 45.060.01;RW020;RW910
- CCS
- S30
- 发布
- 2017-09-00
- 实施
State of railway vehicles - Basic principles and production technology - Part 9: Measuring
- ICS
- 45.060.01
- CCS
- S30
- 发布
- 2017-06
- 实施
Railway applications - Design for PRM use - Equipment and components onboard rolling stock - Part 1: Toilets; German version EN 16585-1:2017
- ICS
- 11.180.01;45.060.20
- CCS
- S30
- 发布
- 2017-05
- 实施
Railway applications. Design for PRM use. Equipment and components onboard rolling stock. Toilets
- ICS
- 11.180.01;45.060.20
- CCS
- S30
- 发布
- 2017-01-31
- 实施
- 2017-01-31
This document specifies the requirements and test methods for a stationary energy storage system to be introduced as a trackside installation and used in a power supply network of a DC electrified railway. This system can take electrical energy from the DC power supply network, store the energy, and supply the energy back to the DC power supply network when necessary. This document does not apply to onboard energy storage systems. This document applies to systems which are installed to achieve one or more of the following objectives. Absorption of regenerative energy; effective use of regenerative energy (saving energy); reduction of rolling stock maintenance (reduction of brake shoe/pad wear, etc.); avoidance of adverse effects of heat generated during braking (e. g. in tunnels, etc.); Power compensation; compensation of line voltage; reduction of peak power; reduction in the requirement of the rectifier ratings. If this system is combined with one or more of the following functions, this document may be used as a guideline; reverse transmission of regenerated power to the upstream power supply network (e. g. inverting or reversible substations); use of the regenerated energy for purposes other than the running of trains, such as for station facilities, etc; resistive consumption of regenerated power. Although it is assumed that the system uses the following typical energy storage technologies, this document also applies to other existing or future technologies; batteries (lithium-ion, nickel metal hydride, etc.); capacitors (electric double layer capacitors, lithium-ion capacitors, etc.); flywheels.
Railway applications - Fixed installations - Stationary energy storage system for DC traction systems
- ICS
- 29.200;29.280;45.060.01
- CCS
- S30
- 发布
- 2017-01
- 实施
- 2017-01-31
Railway applications. Rolling stock. Power supply with onboard energy storage system. Series hybrid system
- ICS
- 45.060.01
- CCS
- S30
- 发布
- 2016-11-30
- 实施
- 2016-11-30
Electronic railway equipment. On-board multimedia and telematics subsystems for railways. General architecture
- ICS
- 45.060;45.060.01
- CCS
- S30
- 发布
- 2016-11-30
- 实施
- 2016-11-30
Railway applications. Railway rolling stock. Draw gear and screw coupling
- ICS
- 45.040;45.060.01
- CCS
- S30
- 发布
- 2016-10-31
- 实施
- 2016-10-31
This International Standard specifies the characteristics of copper and copper alloy grooved contact wires of cross-sections from 70 mm2 to 170 mm2 for use on overhead contact lines. It establishes the product characteristics, the test methods, checking procedures to be used with the contact wires, together with the ordering and delivery condition.
Railway applications - Fixed installations - Electric traction - Copper and copper alloy grooved contact wires
- ICS
- 29.280;45.060.01
- CCS
- S30
- 发布
- 2016-10
- 实施
- 2016-10-07
Electronic railway equipment - On board driving data recording system - Part 1: System specification; Corrigendum 1
- ICS
- 03.220.30;45.060.01
- CCS
- S30
- 发布
- 2016-10
- 实施
- 2016-10-07
Railway applications - Testing and Simulation for the acceptance of running characteristics of railway vehicles - Running Behaviour and stationary tests; German version EN 14363:2016
- ICS
- 45.060.01
- CCS
- S30
- 发布
- 2016-10
- 实施
EMU Vocabulary Part 3: Components and Systems
- ICS
- 01.040.45
- CCS
- S30
- 发布
- 2016-09-30
- 实施
- 2017-04-01
Technical conditions for stainless steel welding for EMUs
- ICS
- 45.060.01
- CCS
- S30
- 发布
- 2016-09-30
- 实施
- 2017-04-01
本标准规定了铆接的一般技术要求、检查方法和验收规则。 本标准适用于铁路车辆新造和修理的铆接结构(不包括压力容器)。
General technical conditions for riveting of railway vehicles
- ICS
- 45.060
- CCS
- S30
- 发布
- 2016-09-30
- 实施
- 2017-04-01
EMU Vocabulary Part 2: Testing
- ICS
- 01.040.45
- CCS
- S30
- 发布
- 2016-09-30
- 实施
- 2017-04-01
EMU Vocabulary Part 1: Basic Vocabulary
- ICS
- 01.040.45
- CCS
- S30
- 发布
- 2016-09-30
- 实施
- 2017-04-01
Coding Rules for Types, Models and Numbers of Rolling Stocks Part 3: Trucks
- ICS
- 45.060.01
- CCS
- S30
- 发布
- 2016-05-26
- 实施
- 2016-12-01
Coding Rules for Types, Models and Numbers of Rolling Stocks Part 2: Passenger Cars
- ICS
- 45.060.01
- CCS
- S30
- 发布
- 2016-05-26
- 实施
- 2016-12-01
