S40 机车综合 标准查询与下载

DIN EN 14813-2:2011 轨道交通.机车驾驶室用空调.第2部分:型式试验;德文版本EN 14813-2-2010+A1-2010

Railway applications - Air conditioning for driving cabs - Part 2: Type tests; German version EN 14813-2:2006+A1:2010

TB/T 3245-2010 机车用电热防寒装置

本标准规定了机车用电热防寒装置的术语和定义、技术要求、检验方法、检验规则及标志、包装、运输和储存等。 本标准适用于各型机车阀类和管路系统用电热装置的设计、制造和检验，亦适用于动车及其他自轮运转设备。

Electrical heating cold-resistant device for locomotive

TB/T 2211-2010 机车车辆悬挂装置钢制螺旋弹簧

本标准规定了新设计机车车辆悬挂装置钢制螺旋弹簧的几何特征、运用要求、技术要求、试验方法、产品质量、标记和包装等。 本标准适用于: -铁路机车车辆悬挂装置的钢制螺旋弹簧; -由圆截面等径钢棒材制成的等节距圆柱形压缩弹簧; -其他不同形状的螺旋弹簧。

Steel helical spring of suspension mechanism for rolling stock

BS EN 50215:2009 轨道交通.全部车辆.竣工后投入使用前机车车辆的检验

This European Standard specifies general criteria to demonstrate by testing that newly constructed complete railway vehicles conform with standards or other normative documents. This standard is intended to be used as technical instructions for the processing of tests which may be needed for demonstration of certain technical requirements where they are relevant. This standard is not intended to be used as a list of approval requirements without consideration of aforementioned technical requirements. This standard, as a whole or in part, applies to all railway vehicles except special purpose vehicles such as track-laying machines, ballast cleaners and personnel carriers. The extent of application of the standard for particular vehicles will be specifically mentioned in the contract.

Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service

ANSI/ASA S12.69-2010 铁路角对位测试规程

Federal regulations require the testing of sound emissions from horns located on railroad locomotives. This Standard specifies an alternate method for compliance with the Federal requirements in metropolitan areas where tests cannot be conducted in an outdoor space free of obstructions. The data that result from this procedure are equivalent to those that derive from the procedure promulgated by the Federal Railroad Administration as described in 49 CFR Part 229.129.

Procedure for Testing Railroad Horns ex situ

ANSI/ASME RT-1-2009 轻轨车辆结构要求的安全性标准

This Standard applies to carbodies for newly constructed light rail vehicles for transit passenger service in North America. The standard defines requirements for the incorporation of passive safety design concepts related to the performance of the carbody of light rail vehicles in collisions, so as to enhance passenger safety and limit and control damage. This Standard does not cover heavy rail transit vehicles, automated people movers, and freight, commuter, high speed or any other rail vehicles under the jurisdiction of the Federal Railroad Administration. There are several issues related to safety not addressed such as but not limited to: Structural repairs; Fatigue; Corrosion; Fire protection (NFPA 130); Interior vehicle design; Emergency egress from vehicle (NFPA 130)

Safety Standard For Structural Requirements For Light Rail Vehicles

GOST 10393-2009 铁路全部车辆用压缩机和压缩机组.一般规范/注:代替GOST 10393 (1999)

Compressors and compressor units for the railway rolling stock. General specifications

GOST R 52920-2008 牵引铁路车辆用轮副.电阻的测量方法

Wheelsets for the traction railway stock. Method of measuring the electrical resistance

GOST R 53192-2008 货运汽车焊接钢结构.技术要求

Welded steel structures of freight cars. Technical requirements

GOST R 53191-2008 采用双轮机车和汽车组装供电单位使用收缩配合的方法.典型工艺

Wheelset assembly for locomotives and motor-powered units using shrink fit method. Typical technological process

GOST 31373-2008 机车和马达推力设备的轮辐.强度计算和试验

Wheelsets of locomotives and motor-powered units. Strength calculations and tests

TB/T 1391-2007 机车司机控制器

本标准规定了机车司机控制器的通常使用条件、额定参数、技术要求、试验方法、试验规则和标志、包装、运输、贮存。 本标准适用于铁道电力机车、内燃机车和动车组上使用的主司机控制器、辅司机控制器。

Locomotive controller

TB/T 1457-2007 机车位置转换开关

本标准规定了机车位置转换开关的通常使用条件、额定参数、技术要求、试验方法、试验规则和标志、包装、运输、贮存。 本标准适用于铁道电力机车、内燃机车和动车组上使用的机车位置转换开关。 对于不同于本标准的特殊要求、经用户和制造厂协商，可在产品技术条件中另行规定。

Locomotive position changeover switch

DIN EN 14813-1:2006 轨道交通.机车驾驶室用空调.第1部分:舒适度参数

This European Standard is applicable to railway vehicle driving cabs which are air-conditioned or heated/ventilated. These include: — locomotives; — mainline, suburban and regional vehicles; — urban vehicles such as metres and trams. This European Standard does not consider the special operational requirements of shunt locomotives. This European Standard specifies the comfort parameters for the driving cab to ensure driver comfort which helps safe operation. The conditions under which the physical parameters mentioned in this European Standard shall be measured are defined in EN 14813-2.

Railway applications - Air conditioning for driving cabs - Part 1: Comfort parameters; English version of DIN EN 14813-1:2006-10

DIN EN 14813-2:2006 轨道交通.机车驾驶室用空调.第2部分:类型试验

This European Standard is applicable to railway vehicle driving cabs which are air-conditioned or heated/ventilated. These include: — locomotives; — mainline, suburban or regional vehicles; — urban vehicles such as metres and trams. This European Standard does not consider the special operational requirements of shunt locomotives. This European Standard specifies the comfort parameter measurement methods for driving cabs. The comfort parameters and their tolerances cited in this European Standard are defined in EN 14813-1.

Railway applications - Air conditioning for driving cabs - Part 2: Type tests; English version of DIN EN 14813-2:2006-10

IEC 61133:2006 铁道设施.铁道车辆.车辆组装后和运行前的整车试验

This International Standard specifies general criteria to demonstrate by testing that newly constructed complete railway vehicles conform with standards or other normative documents. This standard, as a whole or in part, applies to all railway vehicles except special purpose vehicles such as track-laying machines, ballast cleaners and personnel carriers. The extent of application of the standard for particular vehicles will be specifically mentioned in the contract. NOTE 1 The parts of the standard which are applicable will depend on the type of vehicle (e.g. passenger, freight, powered trailer, etc.). NOTE 2: The scope of this standard excludes railbound and road/rail vehicles for construction and maintenance of railway infrastructure. NOTE 3 This standard does not deal with tests carried out on components or equipment before fitting to the vehicle. Insofar as this standard is applicable it may be used for the following: – generator sets mounted on a vehicle provided for auxiliary purposes; – the electrical transmission used on trolley buses or similar vehicles; – control and auxiliary equipment of vehicles with non-electrical propulsion systems; – vehicles guided, supported or electrically propelled by systems which do not use the adhesion between wheel and rail.

Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service

DIN 5566-3:2006 铁路设施.驾驶室.第3部分:城市和郊区铁路车辆用附加要求

The document defines specific requirements on the driver's post in urban traffic vehicles which exceed the requirements defined in document (Part 1).

Railway vehicles - Driver cabs - Part 3: Additional requirements for urban and suburban rolling stock

TB/T 2710.2-2005 机车、动车用空气压缩机技术条件.第2部分：螺杆空气压缩机

本部分规定了机车、动车用往复活塞空气压缩机的技术要求、试验方法、检验规则、标志、包装和贮存。 本部分适用于机车、动车用风冷、两极、额定排气压力不超过1000kPa的空压机。 本部分也适用于公务机车、工矿机车、城轨车辆用空压机。

Technical specification for air compressor on locomotive and power car Part 2: Screw air compressor

TB/T 2187-2006 起重轨道车通用技术条件

本标准规定了在铁路线路上运行的起重轨道车的技术参数和型号与系列、要求、试验方法、检验规则、标志、包装、运输、贮存和质量保证。 本标准适用于以柴油机为动力、额定起重量为5t～50t的标准轨距新造起重轨道车的设计、制造和检验，非标准轨距的起重轨道车亦可参照本标准有关条款执行。

General technical specification for railway crane

TB/T 2973-2006 列车尾部安装防护装置及附属设备

本标准规定了列车尾部安全防护装置（以下简称列尾装置）及附属设备的组成和主要功能、环境条件、基本要求、主要技术指标、设备接口及数据传唤、设备安装要求和试验方法等内容。 本标准适用于列车尾部安全防护装置及附属设备的研制、设计、生产、使用和检验。

End-of-train safety equipment and accessories