载货汽车标准-分析测试百科网

HBm 66.45-1990 微型货车油量表技术条件

本标准规定了微型货车油量表的技术要求。试验方法、检验规则及标志、包装、运输、贮存。　　本标准适用于电热式具有自动调压器的微型货车燃油油量表（以下简称油量表）。也适用于微型轿车燃油油量表。

Specifications for fuel gauges of minivans

ICS
CCS: T43
发布: 1987-02-01
实施: 1987-03-01

HBm 66.46-1990 微型货车机油压力指示灯开关技术条件

本标准规定了微型货车机油压力指示灯开关的产品分类、技术要求、试验方法、检验规则及标志、包装、运输、贮存。　　本标准适用于微型货车机油压力指示灯开关（以下简称开关），也适用于微型轿车机油压力指示灯开关。

Specifications for the oil pressure indicator light switch of minivans

ICS
CCS: T43
发布: 1987-02-01
实施: 1987-03-01

HBm 66.49-1990 微型货车仪表湿热试验方法

本标准规定了微型货车仪表湿热试验目的，试验条件及试验程序。　　本标准适用于微型货车仪表（以下简称试品）的湿热试验。也适用于微型轿车仪表的湿热试验。微型货（轿）车的电气设备和附件的湿热试验也可参照采用。

Damp heat test method for instrumentation of minivans

ICS
CCS: T43
发布: 1987-02-01
实施: 1987-03-01

HBm 66.48-1990 微型货车仪表防尘和耐尘试验方法

本标准规定了微型货车仪表防尘和耐尘试验方法的试验目的、试验条件、试验装置、试验程序和试验结果评定。　　本标准适用于微型货车仪表（以下简称试品）的防尘和耐尘试验，也适用于微型轿车仪表的防尘和耐尘试验。微型货（轿）车的电气设备和附件的防尘和耐尘试验也可参照采用。

Test method for dustproof and dust resistance of instrumentation of minivans

ICS
CCS: T43
发布: 1987-02-01
实施: 1987-03-01

ARMY MIL-T-11663 K-1987 商用4X2型载量为21.000至32000磅后悬式集装箱物料装卸卡车

This Specification covers d i e s e l or gasoline engine driven, four-wheel., two-rear-wheel drive materials hand1 ing trucks having gross vehicle weights(GVW) of 21,000 t o 32,000 pounds, for normal operating condit ions.

TRUCK, MATERIAL HANDLING, CONTAINER HOISTING: REAR HOIST, 21,000 TO 32,000 POUNDS GVW, 4X2, COMMERCIAL

ICS: 53.060
CCS: T43
发布: 1987
实施

AS 2359.2:1985 SAA工业卡车代码第2部分:操作

Prescribes requirements for the operation, maintenance, repair and modification of industrial trucks and their attachments as defined by AS 1763. An appendix gives guidance on atmospheric contaminants.

Industrial trucks (known as the SAA Industrial Truck Code) - Operation

ICS
CCS: T43
发布: 1985-10-04
实施

ARMY MIL-T-17760 G-1985 手引导带对讲机的工业用不分级的电驱动带货盘的卡车

This specification covers heavy duty, electric powered, low-lift forks, hand guiCed, walkie-type pallet trucks.

TRUCKS, PALLET, POWERED: ELECTRIC, NON-TIERING, INDUSTRIAL; WALKIE, WALKIE-RIDER, HAND GUIDED

ICS: 53.060
CCS: T43
发布: 1985-09-03
实施

BS AU 200-1a:1984 载重货车用减少喷溅装置.第1a部分:密封装置的设计规范

Specifies three types of devices for reducing side spray emitted from the wheels of heavy goods vehicles. An appendix gives brief guidelines on aerodynamics.

Spray reducing devices for heavy goods vehicles - Specification for design of containment devices

ICS: 43.040.60;43.080.10
CCS: T43
发布: 1984-08-31
实施: 1984-08-31

BS AU 200-2a:1984 载重货车用减少喷溅装置.灭火材料及设备和空气/水分离材料及设备性能规范

Specifies level of performance of suppression material or devices and durability of air/water separating material for containment devices specified in BS AU 200-1.

Spray reducing devices for heavy goods vehicles - Specification for performance of suppression material and devices, and air/water separating material and devices

ICS: 43.040.60;43.080.10
CCS: T43
发布: 1984-08-31
实施: 1984-08-31

DIN 76060:1983 商业车辆上前部安装设备用的安装板

Fitting sheets for front mounted implements on commercial vehicles

ICS: 43.160
CCS: T43
发布: 1983-08
实施

ARMY MIL-T-740 G-1983 M39.M39A1.M39A2和M809系列的军事设计的6X6型5吨卡车

This specification covers general and special purpose 5 ton, gasoline, multi-fuel, and diesel engine powered, six-wheel, six-wheel drive, military design truck chassis, trucks, and truck tractors having single front and dual rear wheels.

TRUCKS: 5 TON, 6X6, MILITARY DESIGN, M39, M39A1, M39A2 AND M809 SERIES