T58 油罐汽车 标准查询与下载

QC/T 256-1998 液化石油气汽车定型试验规程

本标准规定了可燃用液化石油气的汽车的定性试验实施条件、试验项目、程序及方法和试验报告的内容。 　　本标准适用于在已定型汽车产品上安装液化石油气专用装置的液化石油气单燃料、汽油/液化石油气两用燃料和柴油-液化石油气双燃料汽车中的M类和N类汽车。

Specifications for Type Test of Liquefied Petroleum Gas Vehicles

HG 2599-1994 液氨汽车罐车技术条件

本标准规定了液氨汽车罐车的技术要求、试验方法和检验规则。 本标准适用于设计压力不大于2.2Mpa、设计温度为50℃，运输液氨的固定式汽车罐车，其它形式的罐车亦可参照采用。

Technical conditions for liquid ammonia tanker

DIN 75014:1991 圆桶油罐车的拱型顶盖.尺寸

The main dimensions are given for the dome covers, and the requirements are stated for the material, and for the flanges.

Dome cover for tank trucks, cylindrical; dimensions

BS 7122:1989 液化气体道路运输用的焊接钢槽车规范

Material, design, construction and testing. Tanks with manually and/or automatically welded circumferential and longitudinal seams. May also be used for portable tanks with capacity greater than 1000 L.

Specification for welded steel tanks for the road transport of liquefiable gases

DIN 75012:1986 公路槽罐车.油尺组件.连接尺寸

Dipstick assemblies for road tankers are emploied for calculating the content of tanks. Specified are mating dimensions.

Road tankers; dipstick assembly; mating dimensions

NF M88-091:1986 液态石油产品用公路罐车.电动装载.标定直径DN80的连接装置

Road tankers foe liquid petroleum products. Source (bottom) loading. Coupling devices ND 80.

NF M88-130:1985 石油产品罐式车箱.排放最大压强为2.67ba.圆顶盖和闭锁装置

Tank wagons for petroleum products with emptying at a service pressure of 2,67 bar maximum. Dome and closing device. Dimensions.

NF T81-004:1984 运输设备.液体罐车.灌装和防溢装置.扣紧和相应的嵌合

TRANSPORT EQUIPMENT. TANK FOR LIQUID PRODUCTS. FILLING AND OVERFLOW CONTROL DEVICE. FASTENING AND CORRESPONDENCE TABLE.

NF M88-080:1984 道路油罐车.液态化学产品金属油罐.压力排放装置:管状柱塞,进气孔

ROAD TANKER VEHICLES. METALLIC TANKERS FOR LIQUID CHEMICAL PRODUCTS. DEVICES EFFECTING DISCHARGE BY MEANS OF PRESSURE : PLUNGER TUBE,AIR OFF-TAKE.

NF M88-072:1983 运输和装卸.未冷冻压力溶解液化气道路罐车.下部装卸装置

Transport and materials handling. Road tankers for non-refrigerated liquefied and dissolved gas under pressure. Floor filling and draining devices.

NF T81-100:1982 运送危险品罐车上层装置的防护.设计与定位原则

Protection for the top sections of road tankers carrying dangerous materials. Design and positioning principales.

NF M88-113:1982 罐车.液态石油产品的运输.工作压力等于或小于４bar的ＤＮ６５．ＤＮ８０和ＤＮ１００的止流和安全内部阀门

ROAD TANKERS. TRANSPORTATION OF LIQUID PETROLEUM PRODUCTS. INTERNAL STOP AND SAFETY OBTURATOR. NOMINAL DIAMETERS DN 65,DN 80 AND DN 100 FOR SERVICE PRESSURE LESS THAN OR EQUAL TO 4 BAR.

NF M88-300:1981 增强塑料制道路罐车.制造罐壁用材料的定义

Road tankers in reinforced plastic. Definition of materials suitable for the construction of vessel walls.

NF M88-326:1981 增强塑料公路油槽车.化学兼容性试验

Road tankers in reinforced plastic. Chemical compatibility test.

NF M88-325:1981 增强塑料制公路油槽车.故障.验收范围

Road tankers in reinforced plastic. Faults. Acceptable level.

NF M88-317:1981 增强塑料制公路油槽车.防静电效应

Road tankers in reinforced plastic. Protection against electrostatic phenomena.

NF M88-402:1981 罐车.沥青运输.软管

Road tankers. Bitumen transport. Hoses.

NF M88-087:1981 无毒无腐蚀液化气低温运输.真空双壁罐车.检修设备

Transportation of non-toxic, non-corrosive, low temperature liquefied gases. Evacuated double shell road tankers. Service equipment.

NF T81-104:1981 液态气体的运输和装卸.底部注入和排出的罐车.工作压力范围为 4 巴 - 40 巴用标准尺寸 dn 80 和 dn 100 的内部安全闸

Transportation and handling of liquefied gases. Tanker vehicules filled and emptied from below. Internal safety gates dn 80 and dn 100 for operating pressures between 4 bar and 40 bar.

NF T81-102:1980 危险液态化学制品的运输.顶部注入和排出的道路罐车.内部关闭阀和安全阀(连接与操纵)

Transportation of dangerous liquid chemicals. Road tankers with top refuelling and discharging. Internal cut-off and safety valves (coupling and control).