T69 驾驶室与其他 标准查询与下载

BS EN 15694:2009 农业和林业拖拉机.乘客座椅.要求和试验规程

This standard is applicable to agricultural and forestry tractors on which provision is made for carrying one person in addition to the driver. It specifies minimum requirements for space and support, specifies roll-over protective structures (ROPS) test procedures and seat belt requirements, by reference to other standards.

Agricultural and forestry tractors - Passenger seat - Requirements and test procedures

NF U02-087-1:2010 农用拖拉机和自力推进喷雾机.操作者(驾驶员)防止有害物质的保护.第1部分:驾驶室分类、要求和试验规程

Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 1 : cab classification, requirements and test procedures.

NF U02-087-2:2010 农用拖拉机和自力推进喷雾机.操作者(驾驶员)防止有害物质的保护.第2部分:滤波器、要求和试验规程

Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2 : filters, requirements and test procedures.

ANSI/ASABE AD23205-2010 农业设备的教学座位

Instructional Seat for Agricultural Equipment

ISO 3776-1:2006 农用拖拉机和机械.安全带.第1部分:锚定要求

This part of ISO 3776 specifies the location, relative position and threaded hole dimensions of the anchorages for pelvic restraint (seat) belt assemblies intended to be used by the operators of agricultural tractors and self-propelled machinery.

Tractors and machinery for agriculture - Seat belts - Part 1: Anchorage location requirements

ISO 23205:2006 农业拖拉机.教员座

This International Standard specifies the minimum design and performance requirements for an instructional seat and restraint designed for limited use by a trainer, trainee or service person inside the enclosed cab of an agricultural tractor. The instructional seat is neither intended for, nor is it designed for use by, children.

Agricultural tractors - Instructional seat

ANSI/ASABE/ISO 5007:2003 农用轮式拖拉机.驾驶员的座位.传输振动的实验室测量

Specifies a laboratory method for measuring and evaluating the effectiveness of the suspension of operator seats on agricultural wheeled tractors.

Agricultural wheeled tractors - Operator's seat - Laboratory measurement of transmitted vibration

BS ISO 5007:2003 农用轮式拖拉机.驾驶员的座椅.传动振动的实验室测量方法

This International Standard specifies, in accordance with ISO 10326-1, a laboratory method for measuring and evaluating the effectiveness of the suspension of operator seats on agricultural wheeled tractors. It also specifies acceptance criteria based on the test results, while defining the input spectral classes relating to three classes of agricultural tractor with rubber tyres, unsprung rear axles and no low-frequency cab isolation — those of up to 3 600 kg (class 1), those of from 3 600 kg to 6 500 kg (class 2), and those of over 6 500 kg (class 3) — each of which defines a group of machines having similar vibration characteristics. The method tests the effectiveness of the seat suspension in reducing the vertical whole-body vibration transmitted to the operator at frequencies of from 1 Hz to 20 Hz. It is not applicable to vibration reaching the operator other than through the seat (e.g. that sensed by the operator's feet on the platform or control pedals or hands on the steering wheel). NOTE The tests and criteria defined in this International Standard are intended for operator seats used in agricultural tractors of conventional design. Tractors with design features such as isolated front or rear axles or both and low-frequency cab suspensions, which result in significantly different vibration characteristics, can be tested in accordance with ISO 5008 to determine a whole body vibration emission value or using other standards developed for measuring and evaluating the effectiveness of the seat suspension on such vehicles.

Agricultural wheeled tractors - Operator's seat - Laboratory measurement of transmitted vibration

JB/T 8303-1999 农业拖拉机驾驶座安全带

本标准规定了农业拖拉机驾驶座安全带及其固定件的要求及试验方法。 本标准适用于装有驾驶员保护装置(安全驾驶室或安全架)的农业轮式拖拉机。

Tractors for agriculture-Seat safety belt

BS ISO 14269-5:1998 农业和林业用拖拉机和自动推进式机械.驾驶室环境.增压系统试验方法

This part of ISO 14269 specifies a test procedure which will provide for uniform measurement of the pressurization inside an operator enclosure of tractors and self-propelled machines for agriculture and forestry when equipped with a ventilation system.

Tractors and self-propelled machines for agriculture and forestry - Operator enclosure environment - Pressurization system test method

BS ISO 14269-1:1998 农业和林业用拖拉机和自动推进式机械.驾驶室环境.词汇

ISO 14269 specifies test methods and criteria for the evaluation of the operator enclosure in agricultural and forestry tractors, and self-propelled machines. This part of ISO 14269 gives terms and definitions which are used in the other parts of ISO 14269.

Tractors and self-propelled machines for agriculture and forestry - Operator enclosure environment - Vocabulary

BS ISO 14269-2:1998 农业和林业用拖拉机和自动推进式机械.驾驶室环境.加热、通风和空调试验方法和性能

This part of ISO 14269 specifies a uniform test method for measuring the contribution to operator environmental temperature and humidity provided by an air-conditioning, heating and ventilation system operating in a specific ambient environment for tractors and self-propelled machines for agriculture and forestry. The method may not determine the complete climatic environment of the operator since this is also affected by heat load from sources other than those on the machine, for example solar heating. It is recommended that part 3 of ISO 14269 be used in conjunction with this part to determine more accurately the complete heat loading on the operator enclosure. Minimum performance levels for the machine's operator enclosure air conditioning, heating and ventilation systems are established in this part.

Tractors and self-propelled machines for agriculture and forestry - Operator enclosure environment - Heating, ventilating and air-conditioning test method and performance

BS ISO 14269-3:1998 农业和林业用拖拉机和自动推进式机械.驾驶室环境.太阳能加热效果测定

This part of ISO 14269 specifies a test method for simulating solar heating in the laboratory and measuring the radiant heat energy from a natural or simulated source. This standard is applicable to tractors and self-propelled machines for agriculture and forestry when equipped with an operator enclosure.

Tractors and self-propelled machines for agriculture and forestry - Operator enclosure environment - Determination of effect of solar heating

BS ISO 14269-4:1998 农业和林业用拖拉机和自动推进式机械.驾驶室环境.空气过滤元件试验方法

This part of ISO 14269 specifies a uniform test method for determining performance levels of operator enclosure panel-type air filters. It is applicable to tractors and self-propelled machines for agriculture and forestry when equipped with an operator enclosure with a ventilation system.

Tractors and self-propelled machines for agriculture and forestry - Operator enclosure environment - Air filter element test method

JB/T 8720-1998 拖拉机用热塑性塑料零件.通用技术条件

本标准规定了用热塑性塑料制造的拖拉机零件的通用技术要求、试验方法、检验规则、标志、运输和贮存等有关细则。 本标准适用于用热塑性塑料制造的拖拉机零件。用热塑性塑料制造的农用运输车、农机具用零件也可以参照执行。

General specifications of thermoplastic parts for tractors

ISO 4253:1993 农业拖拉机 机手座位的尺寸

Lays down dimensions for the operator's seat and the location of specific controls relative to the seat index point within the seating accommodation on agricultural tractors with a track width greater than 1150 mm. The controls included are the steering-wheel, clutch pedal, brake pedal(s), and throttle pedal. Standardized dimensions and locations will assist the future design of operator's seating accommodation on agricultural tractors.

Agricultural tractors; operator's seating accommodation; dimensions

JB/T 6716-1993 农业拖拉机驾驶室门道、紧急出口与驾驶员的工作位置尺寸

本标准规定了农业拖拉机的门道、紧急出口与驾驶员工作位置的最小尺寸。 本标准适用于最小轮距（轨距）大于1150mm的农业拖拉机。

Dimensions of agricultural tractor cab doorways, emergency exits and driver's working position

ISO 3462:1980/Amd 1:1992 第1次修改

Tractors and machinery for agriculture and forestry; seat reference point; method of determination; amendment 1

ISO 8935:1990 农林用拖拉机 外部设备控制器的安装座和开口

Specifies requirements to allow mounting of additional controls and instrumentation used for remote operation of supplementary machinery and equipment on tractors, and provision of an electrical power-point adjacent to the mounting; it also lays down requirements for an apeture through which the control cable or hose enters the tractor cab. Some figures illustrate the meaning of the description.

Tractors for agriculture and forestry; mountings and apertures for external equipment controls

NF U02-062:1989 农用拖拉机.座椅安全带的锚定装置

Tractors for agriculture. Seat belt anchorages.