U22 甲板机械 标准查询与下载

KS V ISO 6555:2008 造船.顶索定位绞车

이 표준은 데릭 하역 장치에 사용되는 경하 동력식(lightly powered)과 외부 동

Shipbuilding-Topping winches

KS V ISO 13617:2008 船用焚烧炉要求

이 표준은 선박의 정상 운항 중 발생하는 폐기물 및 기타 선 내 쓰레기(예를 들어 정비,

Shipboard incinerators-Requirements

ISO 3828:2008 造船和海上构筑物.甲板机械.词汇和符号

ISO 3828:2008 establishes the vocabulary for the various terms in use relative to ship's deck machinery. It defines, in English, general terms used in connection with this subject, and includes specific terms associated with anchoring and mooring, cargo handling, towing, ancillary deck equipment and special deck machinery of working and oceanographic research ships. In the preparation of this vocabulary, care has been taken to standardize only suitable terms and definitions and not to perpetuate unsuitable terms because of their use in the past. The illustration given against the respective terms are purely diagrammatic and have been developed to provide for any series of combination of symbols, to represent the respective type of deck machinery.

Shipbuilding and marine structures - Deck machinery - Vocabulary and symbols

ARMY MIL-A-12560 H INT AMD 4-2007 战斗用车类同质焊接钢装甲板(1/4 至 8英尺.(包含)]

This specification covers wrought-steel homogeneous armor plate in thicknesses　for 1/4 to 6 inches inclusive for use in combat-vehicles and 1/2 to 12 inches inclusive for use　in proof and acceptance testing of armor defeating ammunition(see 6.1 and 6.4.3).

ARMOR PLATE, STEEL, WROUGHT, HOMOGENEOUS (FOR USE IN COMBAT-VEHICLES AND FOR AMMUNITION TESTING)

ARMY MIL-A-46100 D INT AMD 2-2007 高硬度锻造钢装甲板

This specification covers quenched and tempered high-hardness wrought steel armor plate for lightweight armor applications for recommended thickness up to 2 inches inclusive(see 6.1 and 6.3).

ARMOR PLATE, STEEL, WROUGHT, HIGH-HARDNESS

NAVY QPL-32170-1-2007 使用耐磨材料制成甲板上的瓦片

This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense.

DECK TILES, WEAR-RESISTANT

NAVY QPL-24613-33-2007 使用化妆的高分子制成内部的甲板涂层材料

This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such listing of a productis not intended to and does not connote endorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest effective issue of the applicable specification. This list is subject to change without notice; revision or amendment of this list will be issued as necessary. The listing of a product does not release the contractor from compliance with the specification requirements.

DECK COVERING MATERIALS, INTERIOR, COSMETIC POLYMERIC

KS V 2116-2006 船舶用普通链

이 규격은 선박용 핸드 레일, 선측 사다리의 달아 올림, 부이 계류(係留) 등에 사용하는

Ships’ chains for general use

KS V 2014-2006 钢板甲板端滚轮

이 규격은 주로 선박의 계류, 하역, 보트를 올리고 내리는 장치 등에 사용하는 호칭 2T(

Steel plate deck end rollers

KS V 2016-2006 开式导缆钳

이 규격은 선박에 사용하는 오픈 촉에 대하여 규정한다.

Open chocks

KS V 2013-2006 铸钢甲板端滚轮

이 규격은 주로 선박의 계류, 하역, 보트를 올리고 내리는 장치 등에 사용하는 호칭 2T(

Cast iron deck end rollers

KS V ISO 7364:2006 造船和海上建筑物.甲板机械.舷梯绞车

이 규격은 전기, 유압 또는 공기압 구동 장치를 장착한 경동력 현측(舷側) 사다리 윈치 및

Deck machinery－Accommodation ladder winches

NAVY MIL-PRF-32171 A-2006 耐用甲板涂层

1.1 Scope. This specification establishes the requirements for high durability, wear resistant deck coatings for use in high traffic areas, with minimal maintenance. 1.2 Classification. Coatings covered by this specification are of the following types and classes, as specified (see 6.2):

DECK COATINGS, HIGH DURABILITY

KS V 2112-2005 木材绑扎用链条

이 규격은 선박에 사용하는 목제 결박용 체인(이하 체인이라 한다.)에 대하여 규정한다.

Chains for lumber lashing

KS V 2215-2005 起重臂架头部

이 규격은 KS V 2211에 규정하는 데릭 붐을 수평 격납하는 경우에 사용하는 붐 레스트

Boom rest head pieces

DLA A-A-56028 VALID NOTICE 1-2005 镶边的圆孔眼

The activities above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil

EYELET, LACING

CB/T 3877-2005 甲板机械一般要求

本标准规定了各种甲板机械所共有的，并在有关标准中未详述的一些特性。 本标准适用于各种甲板机械的设计与制造。如本标准中的任何条款与有关标准、规范或合同相矛盾时，以有关标准、规范和合同为准。

General requirements for deck machinery

ISO 6218:2005 内河航行船只.顶推船手控连接装置.安全要求和主要尺寸

This standard specifies dimensions and safety requirements for manually operated coupling devices (securing devices) used for assembling inland navigation vessels as a push tow or vessels coupled alongside by means of wire rope connections. It also gives rules for designation and testing.

Inland navigation vessels - Manually operated coupling devices for push tows - Safety requirements and main dimensions

KS V ISO 4127-2:2005 造船.内河船舶.导缆器.第2部分:滚筒式导缆器

이 규격은 내수면 운항 선박의 롤러형 페어리더의 형식, 종류, 기본 치수와 기술적 요구 사

Inland navigation－Fairleads－Part 2：Roller fairleads

KS V ISO 4051:2005 造船.内河船舶.舵机.扭矩值

이 규격은 내수면 운항 선박의 한 개 또는 그 이상의 타(회전식 추진 노즐)를 작동하는 조

Inland vessels－Steering gear－Values of torques