U30 船舶专用装备综合 标准查询与下载

HJB 338-2006 舰载海鹰导弹武器装备修理技术要求

Repair Technical Requirements for Shipborne Seahawk Missile Weapons and Equipment

HJB 335.4-2006 水面舰艇反潜系统火控设备修理技术要求 第4部分：H/ZST-2D型反潜火控设备

Repair Technical Requirements for Surface Ship Anti-submarine System Fire Control Equipment Part 4: H/ZST-2D Anti-submarine Fire Control Equipment

HJB 335.3-2006 水面舰艇反潜系统火控设备修理技术要求 第3部分：H/ZST-2型反潜火控设备

Repair Technical Requirements for Surface Ship Anti-submarine System Fire Control Equipment Part 3: H/ZST-2 Anti-submarine Fire Control Equipment

HJB 335.2-2006 水面舰艇反潜系统火控设备修理技术要求 第2部分：H/ZSJ-1型反潜火控设备

Repair Technical Requirements for Surface Ship Anti-submarine System Fire Control Equipment Part 2: H/ZSJ-1 Anti-submarine Fire Control Equipment

HJB 334.5-2006 深水炸弹发射装置及随动系统修理技术要求 第5部分：H/WHH003型火箭深弹发射装置及随动系统

Repair Technical Requirements for Depth Charge Launching Device and Accompanying System Part 5: H/WHH003 Rocket Depth Charge Launching Device and Accompanying System

HJB 334.4-2006 深水炸弹发射装置及随动系统修理技术要求 第4部分：75式火箭深弹发射装置及随动系统

Depth charge launcher and accompanying system repair technical requirements Part 4: Type 75 rocket depth charge launcher and accompanying system

HJB 334.3-2006 深水炸弹发射装置及随动系统修理技术要求 第3部分：65式火箭深弹发射装置及随动系统

Depth charge launcher and accompanying system repair technical requirements Part 3: Type 65 rocket depth charge launcher and accompanying system

CSA Z259.10-06-CAN/CSA-2006 吊舱导线.第2版

This Standard is intended for professional engineers with expertise in designing fall-protection systems. It specifies requirements for the design and performance of complete active fall-protection systems, including travel-restraint and vertical and ho

Full Body Harnesses Second Edition

CB/Z 54-2005 船用配件电镀锌

本指导性技术文件规定了船用配件电镀锌的工艺要求、质量要求、试验方法和检验规则。 本指导性技术文件适用于船用钢制、铜和铜合金配件的电镀锌工艺。非船用配件的电镀锌工艺可参考使用。

Zine-electroplating for marine fittings

GJB 270A-2005 舰船滚动轴承规范

本标准规定了舰船滚动轴承(以下简称轴承)的技术要求、检验方法、质量保证规定及交货准备等。 本标准适用于轴承及其商品零件的设计、试制、生产、检验及验收。

Specification of rolling bearings for ship

CSA Z259.1-05-2005 用以工作定位和移动保持的底盘带和鞍座.第4版.代替Z259.3-M1978

This Standard specifies requirements for the performance, design, testing, marking, and instructions of body belts and saddles. Body belts and saddles are used as part of work positioning and travel restraint systems.

Body belts and saddles for work positioning and travel restraint Fourth Edition; Update No 1: August 2008 [Superseded: CSA Z259.3-M1978, CSA Z259.3-M1978]

CSA Z259.11-05-2005 减震器和绳索.第2版.代替Z259-3-M98-CAN/CSA,Z259.1-95-CAN/CSA

This Standard specifies requirements for the performance, design, testing, marking, and instructions of energy absorbers and lanyards, including lineman’s pole straps and integrally connected lanyards and energy absorbers.

Energy absorbers and lanyards Second Edition; Update No. 1: October 2007 [Superseded: CSA Z259.1-05, CSA Z259.1-05 UPD 1, CSA Z259.1-05, CSA Z259.1-95-CAN/CSA, CSA Z259.1-95-CAN/CSA, CSA Z259.3-M1978, CSA Z259.3-M1978]

CSA Z259.13-04-2004 可弯曲的水平救生索系统.第1版

This Standard specifies requirements related to the performance, design, testing, labelling, and provision of instructions for pre-engineered flexible horizontal lifeline systems (FHLSs) for the attachment of personal protective equipment for protection

Flexible horizontal lifeline systems First Edition

CSA Z259.16-04-2004 主动式坠落保护系统的设计.第1版

Design of active fall-protection systems First Edition

Design of active fall-protection systems First Edition

ASTM F2283-04 船载防油污染系统的标准规范

1.1 This specification covers a shipboard oil pollution abatement system (OPAS) that processes oily waste and allows selective suction from all oily waste holding tanks, waste oil, dirty oil, and drain tanks and the bilges of all oily water generating spaces for operation within the U.S. Contiguous Zone as excepted by local regulatory authorities.1.1.1 This specification covers the system from the point of entering the system until the oil-water mixture is treated and discharged overboard.1.1.2 This includes minimizing oily waste generation, the oily waste holding tank, the oil-water separation device, the control system, feed and recirculation pump(s), a secondary treatment device, and an automatic stopping device capable of detecting 15 ppm oil in the waste stream.1.1.3 Fig. 1 provides a general system schematic to utilize for system configuration.

Standard Specification for Shipboard Oil Pollution Abatement System

ASTM F2363-04 美国海岸警卫队II型或IMO MARPOL 73/78补充件IV海上卫生装置(流量通过处理)的标准规范

1.1 This specification covers the design, manufacture, performance, operation, functioning, and testing of USCG Type II Marine Sanitation Device or IMO MARPOL 73/78 Annex IV flow through treatment device intended to process sewage and graywater generated during the ship''s normal service. This specification is intended for use by purchasers, designers, and manufacturers of shipboard environmental pollution control equipment to determine the requirements for equipment purchase, equipment use, and design considerations.1.2 The device shall be capable of meeting the effluent requirements detailed in Table 1 with respect to ship''s operational area.

Standard Specification for United States Coast Guard Type II or IMO MARPOL 73/78 Annex IV Marine Sanitation Devices (Flow Through Treatment)

ASTM F2283-04(2009) 船载防油污染系统的标准规范

1.1 This specification covers a shipboard oil pollution abatement system (OPAS) that processes oily waste and allows selective suction from all oily waste holding tanks, waste oil, dirty oil, and drain tanks and the bilges of all oily water generating spaces for operation within the U.S. Contiguous Zone as excepted by local regulatory authorities. 1.1.1 This specification covers the system from the point of entering the system until the oil-water mixture is treated and discharged overboard. 1.1.2 This includes minimizing oily waste generation, the oily waste holding tank, the oil-water separation device, the control system, feed and recirculation pump(s), a secondary treatment device, and an automatic stopping device capable of detecting 15 ppm oil in the waste stream. 1.1.3 Fig. 1 provides a general system schematic to utilize for system configuration.

Standard Specification for Shipboard Oil Pollution Abatement System

HJB 250.6-2003 鱼雷修理技术要求鱼—3甲鱼雷修理技术要求

Torpedo Repair Technical Requirements

HJB 250.9-2003 鱼雷修理技术要求鱼—3乙鱼雷修理验收要求

Technical requirements for torpedo repairs - 3 B Acceptance requirements for torpedo repairs

HJB 250.8-2003 鱼雷修理技术要求鱼—3乙鱼雷修理技术要求

Torpedo Repair Technical Requirements Fish—3 B Torpedo Repair Technical Requirements