U50 船舶管路附件综合 标准查询与下载

DIN 86087:2008 与铜镍合金管路对接焊的配件.鞍形连接件

Fittings for butt welding into copper-nickel-alloy pipelines - Saddle type connections

DIN 86086:2008 与铜镍合金管路对接焊的配件.技术规范

Fittings for butt welding into copper-nickel-alloy pipelines - Technical specifications

ISO 15364:2007 船舶与海上技术.散货船用压力/真空阀

This international standard applies to pressure-vacuum relief valves protecting marine vessel systems, including cargo tanks, which may be subject to gas/vapour pressure or vacuum beyond the design parameters of the system/tank. This International Standard specifies the minimum requirements for performance and testing of pressure-vacuum relief valves, with emphasis on selection of materials, internal finish and surface requirements for pressure-vacuum valves installed on cargo tanks in tankers (see Annex A). This International Standard specifies design and in-service performance criteria, operational testing and maintenance requirements. Certification to this International Standard does not imply suitability for any given installation; it indicates that certain minimum requirements have been considered and that information necessary for determination of suitability is provided to the buyer of the equipment. This International Standard does not cover all test procedures for devices that prevent the passage of flame, such as flame arresters. Such devices may be used in conjunction with pressure/vacuum valves.

Ships and marine technology - Pressure/vacuum valves for cargo tanks

DIN 86003-1 Berichtigung 2:2007 船舶和海上技术.液态介质用管道系统的设计、生产和试验.第1部分:设计.技术勘误DIN 86003-1-2006

Ships and marine technology - Design, production and test of pipeline systems for liquid media - Part 1: Design, Corrigenda to DIN 86003-1:2006-06

DIN 86003-1 Bb.1:2007 船舶和海上技术.液体介质管道系统的设计、生产和试验.第1部分:设计.补充件1:压降的计算

Ships and marine technology - Design, production and test of pipeline systems for liquid media - Part 1: Design; Supplement 1: Calculation of pressure drop

KS V ISO 644:2006 用于船舶通风系统安装设计图的常规符号

이 규격 즉, 권고 사항은 선박의 환기 시스템의 설치 계통도에 사용하는 통상적인 부호를 포

Conventional signs to be used in schemes for the installations of ventilation systems in ships－Recommendation

KS V ISO 538:2006 船舶管系安装图常用符号

이 규격 즉, 권고사항은 선박의 배관 시스템의 설치에 사용하는 통상적인 부호를 포함한다.

Conventional signs to be used in schemes for the installations of pipeline systems in ships-Recommendation

KS V 7111-2006 船舶机舱.管道内部流速标准

이 규격은 선박 기관부의 제관 계통 유속 표준에 대하여 규정한다.

Pipes of ships’s machinery-Standard velocity of flow

JIS F 7102:2006 造船.机舱内管路系统.垫圈和填料的应用

この規格は，船舶機関部管系の管フランジ，管継手，弁ふた，弁棒などに用いるガスケット及ぴパッキンの使用基準について規定する。

Shipbuilding -- Piping system in machinery space -- Application for gaskets and packings

UL 1105-2006 船用过滤器、净化器和分离器

These requirements cover marine filters, strainers, and separators intended to separate impurities and/or water from the fuel in gasoline or diesel oil fuel systems on boats. These requirements do not cover filters, strainers or separators which are incorporated as integral parts of fuel tanks, fuel pumps, or other items of equipment whose prime functions are not that of filters, strainers, or separators. A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involves a risk of fire or of electric shock or injury to persons shall be evaluated using appropriate additional component and end-product requirements to maintain the level of safety as originally anticipated by the intent of this standard. A product whose features, characteristics, components, materials, or systems conflict with specific requirements or provisions of this standard does not comply with this standard. Revision of requirements shall be proposed and adopted in conformance with the methods employed for development, revision, and implementation of this standard.

UL Standard for Safety Marine Use Filters, Strainers, and Separators Fourth Edition

JIS F 7202:2005 造船.双工滤油器

この規格は，船の燃料油及び潤滑油管系に使用する複式油こし(以下，油こしという。)について規定する。

Shipbuilding -- Duplex oil strainers

JIS F 7208:2005 造船.双工滤油器(H型)

この規格は，船の燃料油及び潤滑油管系に使用するH形油こし（以下，油こしという。）について規定する。

Shipbuilding -- Duplex oil strainers (H type)

ISO 19922:2005 船舶和海上技术.带弹性密封件的金属管道部件的耐火性.试验台要求

This International Standard specifies requirements on a test bench for determining the fire resistance of metallic pipeline components containing a resilient or elastomeric material, in particular by tests according to ISO 19921.

Ships and marine technology - Fire resistance of metallic pipe components with resilient and elastomeric seals - Requirements imposed on the test bench

ISO 19921:2005 船舶和海上技术.带弹性密封件的金属管道部件的耐火性.试验方法

This International Standard specifies test procedures for determining the fire resistance of metallic valves, pipe couplings, and similar pipe components which contain a resilient or elastomeric seal and which are used in ship engineering systems. The purpose of this International Standard is to determine whether, after the period of fire testing on a test bench which fulfils the requirements of ISO 19922, pipeline components remain tight, and without any failure which could affect their function, even when subjected to proof pressure.

Ships and marine technology - Fire resistance of metallic pipe components with resilient and elastomeric seals - Test methods

JIS F 7006:2004 造船.管道系统.图形符号

この規格は，船舶の配管系統図に使用する配管及びその附属品の図記号について規定する。

Shipbuilding -- Piping systems -- Graphic symbols

BS ISO 15838:2003 船舶与海上技术.管道设施中使用的带密封衬垫的机械耦合配件.性能规范

This International Standard defines classification, materials, test requirements, inspection requirements, marking and packaging of fittings for use with gasketed mechanical couplings (GMCs) conforming to ISO 15837.

Ships and marine technology - Fittings for use with gasketed mechanical couplings used in piping applications - Performance specification

DIN EN ISO 15749-2:2004 船舶和海上技术.船舶和海上建筑物的排水系统.第2部分:重力系统用卫生排水和排水管道

This part of ISO 15749 applies to the design of sanitary drain lines in gravity systems (gravity drainage) on ships and marine structures. For planning and basic requirements ISO 15749-1.

Ships and marine technology - Drainage systems on ships and marine structures - Part 2: Sanitary drainage, drain piping for gravity systems (ISO 15749-2:2004); German version EN ISO 15749-2:2004

DIN EN ISO 15749-3:2004 船舶和海上技术.船舶和海上建筑物排水系统.第3部分:真空系统用卫生排水和排水管道

This standard applies to the design of sanitary drain lines in vacuum systems on ships and marine structures. For planning and basic requirements see ISO 15749-1.

Ships and marine technology - Drainage systems on ships and marine structures - Part 3: Sanitary drainage, drain piping for vacuum systems (ISO 15749-3:2004); German version EN ISO 15749-3:2004

DIN EN ISO 15749-4:2004 船舶和海上技术.船舶和海上建筑物的排水系统.第4部分:卫生排水和污物排出管

This part of ISO 15749 applies to the design of sewage desposal pipes within the framework of sanitary drainage on ships and marine structures. For planning and basic requirements, see ISO 15749-3.#,,#

Ships and marine technology - Drainage systems on ships and marine structures - Part 4: Sanitary drainage, sewage disposal pipes (ISO 15749-4:2004); German version EN ISO 15749-4:2004

DIN EN ISO 15749-5:2004 船舶和海上技术.船舶和海上建筑物的排水系统.第5部分:甲板、货舱和游泳池的排水

Ships and marine technology - Drainage systems on ships and marine structures - Part 5: Drainage of decks, cargo spaces and swimming pools (ISO 15749-5:2004); German version EN ISO 15749-5:2004