V04 基础标准与通用方法 标准查询与下载
共找到 3175 条与 基础标准与通用方法 相关的标准，共 212 页
Space engineering - Structural general requirements; English version EN 16603-32:2014
- ICS
- 49.140
- CCS
- V04
- 发布
- 2014-10-01
- 实施
Space engineering - Fracture control; English version EN 16603-32-01:2014
- ICS
- 49.140
- CCS
- V04
- 发布
- 2014-10-01
- 实施
Materials used in space applications need to be evaluated for their behaviour under Particle and UV Radiation. As part of this evaluation often an exposure to a simulated space environment is performed that can raise questions regarding its accuracy and representativeness. The role of this Standard is to establish a baseline for the testing specification. NOTE The environments covered are electromagnetic radiation and charged particles. This Standard defines the procedures for electromagnetic radiation and charged particles testing of spacecraft materials. These materials include for instance thermal control materials, windows, coatings, and structural materials. The procedures include simulation of the environment and the properties to be verified. This Standard excludes electronic components. This standard may be tailored for the specific characteristic and constrains of a space project in conformance with ECSS-S-ST-00.
Space product assurance - Particle and UV radiation testing for space materials
- ICS
- 49.140
- CCS
- V04
- 发布
- 2014-10
- 实施
Space product assurance - Detection of organic contamination surfaces by infrared spectroscopy
- ICS
- 49.140
- CCS
- V04
- 发布
- 2014-10
- 实施
Several classes of materials depend on a chemical reaction for their application and their final properties are sensitive to the exact composition of the reactants. The final properties vary with the reactants age and storage condition. This Standard defines the requirements for the identification, handling, storage and control of limited shelflife materials employed in the fabrication of spacecraft and associated equipment. This standard may be tailored for the specific characteristic and constrains of a space project in conformance with ECSS-S-ST-00.
Space product assurance - Control of limited shelf-life materials
- ICS
- 49.025.01;49.140
- CCS
- V04
- 发布
- 2014-10
- 实施
Space engineering - Structural design and verification of pressurized hardware; English version EN 16603-32-02:2014
- ICS
- 49.140
- CCS
- V04
- 发布
- 2014-10
- 实施
Space engineering - Structural finite element models; English version EN 16603-32-03:2014
- ICS
- 49.140
- CCS
- V04
- 发布
- 2014-10
- 实施
Space engineering - Structural factors of safety for spaceflight hardware; English version EN 16603-32-10:2014
- ICS
- 49.140
- CCS
- V04
- 发布
- 2014-10
- 实施
Space product assurance - Black-anodizing of metals with inorganic dyes
- ICS
- 49.140
- CCS
- V04
- 发布
- 2014-10
- 实施
This Standard establishes the requirements for the specification, the procedures, the execution and the reporting of a thermal cycling test under vacuum for the evaluation of materials, processes, mechanical parts and assemblies intended for use in the fabrication of spacecraft and associated equipment. This is one of the tests to determine the ability of theses articles to withstand changes of ambient temperature under vacuum.
Space product assurance - Thermal testing for the evaluation of space materials@ processes@ mechanical parts and assemblies
- ICS
- 49.140
- CCS
- V04
- 发布
- 2014-10
- 实施
Space product assurance - Verification and approval of automatic machine wave soldering
- ICS
- 49.140
- CCS
- V04
- 发布
- 2014-10
- 实施
Space product assurance - Repair and modification of printed circuit board assemblies for space use
- ICS
- 49.140
- CCS
- V04
- 发布
- 2014-10
- 实施
This Standard defines a multi-test procedure for the determination of the flammability characteristics of non-metallic materials under a set of closely controlled conditions. The test procedure covers both individual materials and materials used in configuration. This Standard describes a series of tests to provide data for aid in the evaluation of the suitability of materials for use in a space vehicle crew compartment. The data obtained are in respect to the ease of ignition and the flame propagation characteristics of materials. All non-metallic materials are inherently flammable, the degree to which this is true is dependant on the chemical nature of the material itself and the environment to which the material is exposed. In the closed environment of a manned spacecraft this can lead to a potentially dangerous situation and close control is therefore required. This standard may be tailored for the specific characteristics and constrains of a space project in conformance with ECSS-S-ST-00.
Space product assurance - Flammability testing for the screening of space materials
- ICS
- 13.220.40;49.025.01;49.140
- CCS
- V04
- 发布
- 2014-10
- 实施
Space product assurance - Requirements for manufacturing and procurement of threaded fasteners
- ICS
- 49.030.01;49.140
- CCS
- V04
- 发布
- 2014-10
- 实施
This Standard covers the following processes of the general materials, mechanicals parts and processes (MMPP) flow of ECSS-Q-ST-70: - The selection of metal alloys for which preference is given to approved data sources (Table 5 1 to Table 5 3) - The criticality analysis to determine if a stress corrosion cracking (SCC) evaluation is necessary This Standard sets forth the criteria to be used in the selection of materials for spacecraft and associated equipment and facilities so that failure resulting from stress-corrosion is prevented. It is intended to provide general criteria to be used in stress-corrosion cracking control, which begins during design thanks to a methodological material selection. This document does not intend to include all factors and criteria necessary for the total control of stress-corrosion cracking in all alloys. The criteria established in this Standard are only applicable to designs for service involving exposure conditions similar to testing conditions As regards weldments, this Standard is applicable to aluminium alloys, selected stainless steels in the 300 series and alloys listed in Table 5-1. This Standard is not applicable to listed materials whose behaviour differs at elevated temperature and in specific chemical. This standard may be tailored for the specific characteristic and constrains of a space project in conformance with ECSS-S-ST-00.
Space product assurance - Material selection for controlling stress-corrosion cracking
- ICS
- 49.025.01;49.140
- CCS
- V04
- 发布
- 2014-10
- 实施
This Standard specifies requirements for mechanical testing of metallic materials to be used in the fabrication of spacecraft hardware. This Standard establishes the requirements for most relevant test methods carried out to assess the tensile, fatigue and fracture properties of metallic materials. It does not give a complete review of all the existing test methods for the evaluation of mechanical properties of metallic materials. Furthermore, this Standard specifies requirements for the evaluation, presentation and reporting of test results. This standard may be tailored for the specific characteristic and constrains of a space project in conformance with ECSS-S-ST-00.
Space product assurance - Mechanical testing of metallic materials
- ICS
- 49.025.01;49.140
- CCS
- V04
- 发布
- 2014-10
- 实施
Space product assurance - Determination of the susceptibility of metals to stress-corrosion cracking
- ICS
- 49.025.01;49.140
- CCS
- V04
- 发布
- 2014-10
- 实施
This Standard describes a thermal vacuum test to determine the outgassing screening properties of materials proposed for use in the fabrication of spacecraft and associated equipment, for vacuum facilities used for flight hardware tests and for certain launcher hardware.
Space product assurance - Thermal vacuum outgassing test for the screening of space materials
- ICS
- 49.140
- CCS
- V04
- 发布
- 2014-10
- 实施
Space product assurance - Determination of offgassing products from materials and assembled articles to be used in a manned space vehicle crew compartment
- ICS
- 49.140
- CCS
- V04
- 发布
- 2014-10
- 实施
The purpose of this standard is to define: The selection of critical items, the definition of cleanliness requirements to satisfy the mission performance requirements and control the levels to be met by personnel, items, facilities and operations of space projects. The management, including organization, reviews and audits, acceptance status and documentation control. It covers design, development, production, testing, operation of space products, launch and mission. In this standard are also guidelines given for identification of possible failures and malfunctions due to contamination and guidelines for achieving and maintaining the required cleanliness levels during ground activities, launch and mission. This Standard applies to all types and combinations of projects, organizations and products, and during all the project phases, except manned missions. It also applies to those ground systems that have a hardware interface to space systems, such as MGSE integration stands. This Standard does not address magnetic, electrical or electrostatic cleanliness. This Standard does not address completely biocontamination aspects. However, references to relevant ECSS standards are provided. This standard may be tailored for the specific characteristic and constrains of a space project in conformance with ECSS-S-ST-00.
Space product assurance - Cleanliness and contamination control
- ICS
- 49.140
- CCS
- V04
- 发布
- 2014-10
- 实施
