V09 卫生、安全、劳动保护 标准查询与下载

SAE AIR4766/1-2005 商用飞机座舱微粒污染物的空气质量

This SAE Aerospace Information Report (AIR) covers airborne particulate contaminants that may be present in commercial aircraft cabin air during operation. Discussions cover sources of contaminants, methods of control and design recommendations. Air quality, ventilation requirements and standards are also discussed. This document covers design information regarding particulate contaminants in commercial aircraft. This document provides information on Environmental Control System (ECS), particulate contamination (solid and liquid phases), bleed and recirculated air and control methods including ventilation used to design and maintain cabin air environments.

Air Quality for Commercial Aircraft Cabin Particulate Contaminants

DLA A-A-59489 A-2005 安全比赛

Purchasers shall specify: - Types and classes required. 7.2 Sources of documents. 7.2.1 Sources of information for governmental documents are as follows.

MATCHES, SAFETY

KS W 1625-2004 航空宇宙.弹性锁垫圈

이 규격은 볼트, 너트, 스크루 및 스터드가 느슨해지지 않도록 하기 위해 사용하는 나선

Aerospace－Spring lock washer

KS W 1623-2004 航空宇宙.平垫圈

이 규격은 항공기용 볼트, 너트 및 스크루에 사용하는 평면, 평 와셔에 대해 규정한다.

Aerospace-Flat washer

MH/T 6033-2004 民用航空油库爆炸和火灾危险场所电气安全规程

Electrical safety specification in explosion and fire hazardous locations of civil aviation oil store

KS W 1614-2004 航空宇宙、平垫圈

이 규격은 항공기용 덧살 평 와셔에 대하여 규정한다.

Aerospace-Flat(burr) washer

KS W 1612-2004 航空宇宙、肩凹垫圈

적용 범위 이 규격은 요철 홈 어깨붙이 와셔에 대하여 규정한다. 비 고 이 규격

Aerospace－Recessed shouldered washer

KS W 1616-2004 航空宇宙、齿形锁垫圈

이 규격은 볼트, 스터드 및 머신 스크루가 있는 조립체의 풀림 방지 또는 마찰력 증가에

Aerospace-Tooth lock washer

KS W 1613-2004 航空宇宙、球和滚筒轴承关键垫圈

이 규격은 볼 또는 롤러 베어링을 사용하는 조립체에 쓰이는 키 와셔에 대하여 규정한다.

Aerospace－Ball and roller bearings key retaing washer

KS W 1615-2004 航空宇宙、水压包装垫圈

이 규격은 항공기 유압 시스템에 사용되는 패킹 보조 와셔에 대하여 규정한다.

Aerospace-Hydraulic packing back-up washer

ISO 15390:2004 航天环境(天然的和人工的).银河宇宙射线模型

This International Standard specifies a model for estimating the radiation impact of galactic cosmic rays (GCR) on hardware and on biological and other objects when in space. This International Standard can also be used in scientific research to generalize the available experimental evidence for GCR fluxes. This International Standard establishes the model parameters and characteristics of variations in the 10 MeV to 10 MeV GCR particles (electrons, protons, and Z = 2 to 92 nuclei in the near-Earth space beyond the Earth's magnetosphere).

Space environment (natural and artificial) - Galactic cosmic ray model

MH/T 7010-2003 民用航空运输机场安全检查信息管理系统技术规范

本标准规定了民用航空运输机场安全检查信息管理系统的技术要求。 本标准适用于民用机场安全检查信息管理系统的设计、建设、更新和验收。

Technical specification for security screening information management system of civil airport

SN/T 1185-2003 入出境航空器废弃物卫生监督规程

Codes of sanitary supervision for entry-exit aircrafts waste

SAE ARP5446-2003 针对视障乘客的安全说明

These recommendations are provided to aid the international air transport industry by identifying a standard, minimum amount of safety instructions that should be given to sight-impaired passengers. This document is not meant to address problems associated with communicating safety information to sight- impaired passengers who are also hearing impaired or non- conversant in the language(s) used by the cabin crew to disseminate general safety information to passengers. Aircraft operators are encouraged to customize the safety instructions for their own operations in order to ensure that required safety information is provided to sight-impaired passengers. The purpose of this SAE Aerospace Recommended Practice (ARP) is to assist airlines, as well as corporate and private operators, in producing safety information presentations that will reinforce and expand the knowledge of sight-impaired passengers relative to safety equipment and procedures, including escape routes and evacuation slides, intended for use by passengers.1.1 Purpose:The purpose of this SAE Aerospace Recommended Practice (ARP) is to assist airlines, as well as corporate and private operators, in producing safety information presentations that will reinforce and expand the knowledge of sight-impaired passengers relative to safety equipment and procedures,including escape routes and evacuation slides, intended for use by passengers.

Safety Instructions for Sight-Impaired Passengers

SAE ARP5150-2003 商务运输类飞机的安全性评估

This document describes guidelines, methods and tools used to perform the ongoing safety assessment process for transport airplanes in commercial service (hereafter, airplane). The process described herein is intended to support an overall safety management program. It is associated with showing compliance with the regulations, and also with assuring a company that it meets its own internal standards. The methods outlined herein identify a systematic means, but not the only means, to assess ongoing safety. This document does not address the economic decision-making associated with the safety management process. While this decision-making is an integral part of the safety management process, this document addresses only the ongoing safety assessment process. To put it succinctly, this document addresses the ?is it safe?? part of safety management. It does not address the ?How much does it cost?? part of the safety management. This document also does not address any specific organizational structures for accomplishing the safety assessment process. While the nature of the organizational structure is significant to the quality of a safety program, this document focuses on the functions to be accomplished and does not attempt to define what the structure should be. The intent is to leave the greatest amount of flexibility to the organizations that use this document.

Safety Assessment of Transport Airplanes in Commercial Service

MH/T 7009-2002 民用航空器飞行事故医学调查程序和技术规范

本标准规定了民用航空器飞行事故医学调查的程序、内容及相应的技术要求。 本标准适用于民用航空器飞行事故的医学调查。

Technical requirements for medical investigation of civil aircraft accident

ISO 14620-1:2002 航天系统.安全要求.第1部分:系统安全

1 General This European Standard defines the safety programme and the technical safety requirements that are implemented in order to comply with the safety policy as defined in ISO 14300-2. It is intended to protect flight and ground personnel, the launch vehicle, associated payloads, ground support equipment, the general public, public and private property, and the environment from hazards associated with space systems. Launch site operations are described by ISO 14620-2. The safety policy is applied by implementing a system safety programme, supported by risk assessment, which can be summarized as follows: a) hazardous characteristics (system and environmental hazards) and functions with potentially hazardous failure effects are identified and progressively evaluated by iteratively performing systematic safety analyses; b) the potential hazardous consequences associated with the system characteristics and functional failures are subjected to a hazard reduction sequence whereby: 1) hazards are eliminated from the system design and operations; 2) hazards are minimized; 3) hazard controls are applied and verified. c) the risks that remain after the application of a hazard elimination and reduction process are progressively assessed and subjected to risk assessment, in order to: 1) show compliance with safety targets; 2) support design trades; 3) identify and rank risk contributors; 4) support apportionment of project resources for risk reduction; 5) assess risk reduction progress; 6) support the safety and project decision-making process (e.g. waiver approval, residual risk acceptance). d) the adequacy of the hazard and risk control measures applied are formally verified in order to support safety validation and risk acceptance; e) safety compliance is assessed by the project and safety approval obtained from the relevant authorities. 2 Field of application This European Standard is applicable to all space projects where during any project phase there exists the potential for hazards to personnel or the general public, space flight systems, ground support equipment, facilities, public or private property, or the environment. The imposition of these requirements on the project suppliers' activities requires that the customer's project product assurance and safety organization also respond to these requirements in a manner which is commensurate with the project's safety criticality. 3 Tailoring When viewed from the perspective of a specific programme or project context, the requirements defined in this European Standard should be tailored to match the genuine requirements of a particular profile and circumstances of a programme or project. NOTE Tailoring is the process by which individual requirements of specifications, standards and related documents are evaluated, and made applicable to a specific programme or project by selection, and in some exceptional cases, modification of existing or addition of new requirements.

Space systems - Safety requirements - Part 1: System safety

LD/T 74.10-2002 民用航空安全检查人员定员定额

Civil Aviation Security Inspection Personnel Quota

KS W 0128-2001 航空器.维护及其安全警告标志

1.1 이 규격은 정기 운항 도중의 중간 기착시 또는 정기 정비 기간 중에 항공기 서비스,

Aircraft-Identification of servicing, maintenance, ground handling and safety/hazard points

ARMY MS35670 REV D NOTICE 1-2001 安全泄放阀

This notice should be filed in front of MS53670D, dated 11 June 1993.

VALVE, SAFETY RELIEF