共找到 1400 条与 航空、航天材料基础标准 相关的标准,共 94 页
This specification covers a solvent-dispersed, corrosion-inhibiting compound packaged in aerosol cans. This product has been used typically for protection of bare or phosphate-treated steel surfaces where more-protective coatings are not functionally desirable, where reapplications in service is feasible, and where water or saline solutions must be displaced from corrodible surfaces to prevent or arrest corrosion, but usage is not limited to such applications.
Compound, Corrosion-Inhibiting Water-Displacing, Soft Film, Aerosol Canned
This specification covers the engineering requirements for producing an anodic coating on aluminum and aluminum alloys which are subsequently sealed with an organic resin. This coating has been used typically to increase corrosion resistance and provide surfaces which will ensure adhesion of subsequent organic finishes, but usage is not limited to such applications. This process is applicable to all forms and alloys of aluminum. Coatings produced through resin-seal anodizing cannot be subsequently dyed. This process is not suitable for parts which contain joints or recesses in which the solutions utilized in the anodizing process may be retained.
Anodic Coating on Aluminum Alloys Sulfuric Acid Process, Resin-Sealed
This amendment forms a part of MIL-C-48882D(AR), dated 5 March 1990, and is approved for use by the U.S. Army Armament Research, Development and Engineering Center, and is available for use by all Departments and Agencies of the Department of Defense.
CHARGE, PROPELLING, 81MM PARTS AND CONTAINER ASSEMBLY
This amendment forms a part of MIL-C-63989C(AR), dated 15 February 1994, and is approved for use by the US Army Armament, Research, Development and Engineering Center, and is available for use by all Departments and Agencies of the Department of Defense.
CARTRIDGE 5.56MM, BALL, M855
This amendment forms a part of MIL-F-70546(AR), dated 5 September 1986, and is approved for use by the U.S. Army Armament Research, Development and Engineering Center, and is available for use by all Departments and Agencies of the Department of Defense.
MILITARY SPECIFICATION FIN ASSEMBLIES, MORTAR CARTRIDGE, 81MM, M28, M29
This amendment forms a part of Military SpecificMaItLio-nC - 48669(AR), dated 1 April 1986, and is approved for use by the U.S. Army Armament, Research, Development, and Engineering Center, and is available for use by all Departments and Agencies of the Department of Defense.
CARTRIDGE, 40MM - M550 ESCAPEMENT ASSEMBLY
This is Technical Corrigendum 1 to ISO 14951-9-1999 (Space systems — Fluid characteristics — Part 3: Nitrogen )
Space systems - Fluid characteristics - Part 3: Nitrogen; Technical Corrigendum 1
This amendment forms a part of MIL-F-71127(AR), dated 26 May 1992, and is approved for use by the U.S. Army Armament Research, Development and Engineering Center, and is available for use by all Departments and Agencies of the Department of Defense.
FUZE, POINT DETONATING, PRACTICE, M775 WITH PYROTECHNIC SIGNATURE CARTRIDGE
This amendment forms a part of MIL-C-60982B(AR), dated 17 November 1980, and is approved for use by the U.S. Army Armament, Research, Development and Engineering Center, and is available for use by all Departments and Agencies of the Department of Defense.
CASE CARTRIDGE, 40MM - M169
This amendment forms part of MIL-C-3066C(AR), dated 23 January 1995, and is approved for use by the US Army Armament, Research, Development, and Engineering Center, and is available for use by all Departments and Agencies of the Department of Defense.
CARTRIDGES, CALIBER .50, ARMOR-PIERCING-INCENDIARY, M8; AND ARMOR-PIERCING-INCENDIARY-TRACER, M20
This amendment forms part of MIL-C-14858A(AR), dated 30 April 1985, and is approved for use by the US Army Armament, Research, Development, and Engineering Center, and is available for use by all Departments and Agencies of the Department of Defense.
CARTRIDGE, CALIBER .50, REFERENCE
This sDecifica ion covers the I Igazine ,Cartridge, Soit Pack, Rekable, M249, 5.56mm Machine Gun,hereafter referred to as the magazine(see 6.1).
MAGAZINE, CARTRIDGE, SOFT PACK, REUSABLE, M249, 5.56MM MACHINE GUN (METRIC), GENERAL SPECIFICATION FOR
This amendment forms a part of MIL-B-71154(AR), dated O1 November 1993, and is approved for use by the U.S. Army Armament, Research, Development and Engineering Center and is available for use by all Departments and Agencies of the Department of Defense.
BODY 60MM FOR CARTRIDGE, PRACTICE M766
This specification covers the requirements for an interval timer for controlling the duration of an electrical pulse to a solenoid valve for use in rain repellent systems covered by specification MIL-R-81589.
Timer Assembly Rain Repellent FSC 6630; Should Be Used Instead of MIL-T-81587A(AS), Which Was Cancelled on 20 June 2000
This standard specifies the characteristics of O’ring seal for jam-nut receptacles in the family of circular electrical connectors coupled by threaded ring.
Aerospace Series Heat Resisting Alloy FE-PA2601 (X6NiCrTiMoV26-15) Non Heat Treated Forging Stock a or D Less Than or Equal to 200mm Edition P 1
Navigation System Data Base ***REPLACED BY ARINC 424-16***
Navigation System Data Base ***REPLACED BY ARINC 424-16***
MIE-C-48 147(AR), dated 18 April 1993, has been reviewed and deteimined to be valid Por use in acquisition.
CASTINGS, FERRITIC MALLEABLE IRON FOR M151 WARHEAD
This specification covers a low-alloy steel in the form of welding wire. This wire has been used typically as filler metal for gas-tungsten-arc and gas-metal-arc welding of steels of similar composition which may be heat treated after welding, but usage is not limited to such applications.
(R) Wire, Steel Welding 2.0Cr - 10Ni - 8.0Co - 1.0Mo - 0.02Al - 0.06V (0.10 - 0.14C) Vacuum Melted, Environment Controlled Packaging UNS K91971
This amendment forms a part of Military Specification M1L-F-63446B7 dated1 2 September19 94, and is approved for use by the US Army Armament, Research, Development, and Engineering Center, and is available for use by all Departments and Agencies of the Department of Defense.
FUZES, GENERAL PURPOSE GRENADE: M230 AND M231 (PRACTICE)
The margins of this amendment are marked with an asteri( *s)k to indicate where changes (additions, modifications, corrections, deletions) from the previous amendment were m
TUBE AND PIPE, NICKEL-COPPER ALLOY, SEAMLESS AND WELDED
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号