V15 复合材料与固体燃料 标准查询与下载

ASTM D7618-10 供与航空火花点火式发动机燃料混合的乙基叔丁基醚(ETBE)标准规范

1.1 This specification covers requirements for fuel grade ethyl tertiary-butyl ether (ETBE) that may be used for blending with fuels for aviation spark-ignition engines where permissible. Other ETBE grades available in the marketplace that do not comply with the requirements of this specification, are not suitable for blending with aviation fuels. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel

NF T70-537:2009 国防用高能材料.固态推进燃料(推进剂)用120 mm直径金属结构模型的评核规定

Energetic materials for defence - Dossier defining the 120 mm diameter metallic structure model for solid propellant (propergol).

GJB 6195-2008 复合固体推进剂危险等级分类方法

本标准规定了复合固体推进剂危险分类的试验项目、试验程序、试验步骤、分类方法、试验记录和分类报告。 本标准适用于复合固体推进剂的危险等级分类。

Classification method for hazard grade of composite solid propellants

DLA MS21380 REV D-2007 LT4K型(铁心)微型固定熔铸射频线圈

Solderable/weldable lead wire, tinned copper, AWG number 21.

COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE, IRON CORE, TYPES LT4K

DLA MS21381 REV E-2007 LT10V174 TO LT10V209 INCL. 和 LT10V247 TO LT10SV258 INCL.型磁屏蔽铁芯微型可变熔铸射频线圈

Dimensions are in inches.

COILS, RADIO FREQUENCY, MOLDED, VARIABLE, SUBMINIATURE, IRON CORE, MAGNETICALLY SHIELDED TYPES LT10V174 TO LT10V209 INCL. AND LT10V247 TO LT10SV258 INCL.

DLA MS21367 REV G-2007 LT10K354 TO LT10K383 INCL型屏蔽(铁心)微型缩影固定包裹射频线圈

The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil.

COIL, RADIO FREQUENCY, ENCAPSULATED, FIXED, MICRO MINIATURE, SHIELDED (IRON CORE), TYPES LT10K354 TO LT10K383 INCL

DLA MS21363 REV B-2007 LT10K307 TO LT10K353 INCL型(磁芯磁套)磁屏蔽超小型固定熔铸射频线圈

Metric equivalents are given for general information only.

COILS, RADIO FREQUENCY, MOLDED, FIXED, MICROMINIATURE, MAGNETICALLY SHIELDED, (FERRITE CORE-FERRITE SLEEVE), TYPES LT10K307 TO LT10K353 INCL.

DLA MS18130 REV E-2007 LT4K074 TO LT4K089型(铁心)超小型固定熔铸射频线圈

These coils are intended to be supported by their leads.

COILS, RADIO FREQUENCY, MOLDED, FIXED, MICROMINIATURE, (IRON CORE), TYPES LT4K074 TO LT4K089

DLA MS14046 REV D-2007 LT10K128 TO LT10K137 型(铁心)超小型固定熔铸射频线圈

Metric equivalents, in parentheses, are given for general information only.

COILS, RADIO FREQUENCY, MOLDED, FIXED, MICROMINIATURE, (IRON CORE) TYPES LT10K128 TO LT10K137

DLA MS14047 REV A-2007 LT10K138 TO LT10K142 INCL型(铁心)微型固定熔铸射频线圈

Metric equivalents, in parentheses, are given for general information only.

COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE, (IRON CORE), TYPES LT10K138 TO LT10K142 INCL.

DLA MS14041 REV B-2007 LT10K108 TO LT10K112 INCL型(铁心)微型固定熔铸射频线圈

This specification is approved for use by all Departments and Agencies of the Department of Defense.

COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE, (IRON CORE), TYPES LT10K108 TO LT10K112 INCL.

DLA MS14043 REV B-2007 LT10K118 TO LT10K122 INCL型(铁心)微型固定熔铸射频线圈

This specification is approved for use by all Departments and Agencies of the Department of Defense.

COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE, (IRON CORE), TYPES LT10K118 TO LT10K122 INCL.

DLA MS14040 REV B-2007 LT10K097 TO LT10K107 INCL型(铁心)微型固定熔铸射频线圈

This specification is approved for use by all Departments and Agencies of the Department of Defense.

COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE, (IRON CORE), TYPES LT10K097 TO LT10K107 INCL.

DLA MS14048 REV A-2007 LT10K143 TO LTI0K147 INCL型(铁心)微型固定熔铸射频线圈

Metric equivalents, in parentheses, are given for general information only.

COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE (IRON CORE), TYPES LT10K143 TO LTI0K147 INCL

NAVY QPL-AS21608-2007 卷曲式终端有护套的套圈

This list has been prepared for use by or for the Government in the acquisition of products covered by the subject non-Government standard and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest adopted issue of the applicable non-Government standard. This list is subject to change without notice; revision or amendment of this list will be issued as necessary. The listing of a product does not release the manufacturer from compliance with the non-Government standard requirements

FERRULE, SHIELD TERMINATING, CRIMP STYLE [Superseded: NAVY QPL-21608 -13 CANC NOTICE 1, NAVY QPL-21608-13, NAVY QPL-21608-12, NAVY QPL-21608-11, NAVY QPL-21608-10, NAVY QPL-21608-9, NAVY QPL-21608-8, NAVY QPL-21608-7 (3), NAVY QPL-21608-7 (2), NAVY QPL

DLA MS14052 REV A-2007 LT10K158 TO LT10K168 INCL型(铁心)微型固定熔铸射频线圈

Metric equivalents, in parentheses, are given for general information only.

COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE, (IRON CORE), TYPES LT10K158 TO LT10K168 INCL.

DLA MS14050 REV A-2007 LT10K153 TO LT10K157 INCL型(铁心)微型固定熔铸射频线圈

Metric equivalents, in parentheses, are given for general information only.

COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE, (IRON CORE), TYPES LT10K153 TO LT10K157 INCL.

DLA MS18100 REV E-2007 LT4K200 TO LT4K208,LT4K220 和 LT4K221　INCL型(酚醛核心)微型固定熔铸射频线圈

This specification is approved for use by all Departments and Agencies of the Department of Defense.

COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE, (PHENOLIC CORE), TYPES LT4K200 TO LT4K208 INCL. LT4K220 AND LT4K221

DLA MS14049 REV A-2007 LT10K148 TO LT10K152 INCL型(铁心)微型固定熔铸射频线圈

Metric equivalents, in parentheses, are given for general information only.

COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE, (IRON CORE), TYPES LT10K148 TO LT10K152 INCL.

DLA QPL-8878-13-2007 螺丝扣绝对安全的一般规范

This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such listing is not intended to and does not connote endorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest effective issue of the applicable specification. This list is subject to change without notice; revision or amendment of this list will be issued as necessary. The listing of a product does not release the contractor from compliance with the specification requirements.

TURNBUCKLES, POSITIVE SAFETYING, GENERAL SPECIFICATION FOR