V20 紧固件 标准查询与下载

BS EN 2285:2017 航空航天系列 衬套 普通 铝合金 带自润滑衬套 尺寸和负载

Aerospace series. Bushes, plain, aluminium alloy, with self-lubricating liner. Dimensions and loads

NF L24-168*NF EN 4178:2017 航空航天系列.MoS2润滑阳极氧化的钛合金制中等长度螺纹粗公差标准柄六瓣凹槽平头螺钉.分类:1100 MPa(室温)/315℃

Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature)/315 oC

DIN EN 6129:2017 航空航天系列.高强度牵引式凸头封闭螺栓;德文和英文版本EN 6129-2016+AC-2017

Aerospace series - Blind bolt, protruding head, high strength, pulltype; German and English version EN 6129:2016 + AC:2017

BS EN 3903:2017 航空航天系列. 耐腐蚀钢层压垫圈

Aerospace series. Washers, laminated, in corrosion resisting steel

BS ISO 15872:2017 航天 UNJ 螺纹 测量

Aerospace. UNJ threads. Gauging

DIN EN 4178:2017 航空航天系列.MoS2润滑的阳极氧化处理的、钛合金中等长度螺纹粗公差标准柄六瓣凹槽平头螺钉.分类:1100 MPa(室温下)/315°C.德文和英文版本EN 4178-2017

Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 °C; German and English version EN 4178:2017

DIN 65508:2017 航空航天.带凸缘垫片和埋头孔,自锁,耐腐蚀钢带MJ螺纹的六角螺母.等级:1100 MPa/315℃/425℃;德文和英文文本

Aerospace - Nuts, hexagon with MJ thread, captive washer and counterbore, self-locking, corrosion-resistant steel - Class: 1 100 MPa/315 °C/425 °C; Text in German and English

DIN 65434:2017 航空航天系列.小埋头紧固件用壁厚为0.5mm的衬套;德文和英文文本

Aerospace series - Sleeves - Wall thickness 0,5 mm, for fasteners with reduced countersunk head; Text in German and English

DIN 65016:2017 航空航天.最大操作温度小于或者等于425°C 的缩减锁定扭矩的自锁螺母.技术规范

Aerospace - Self-locking nuts with reduced locking torque with maximum operating temperature less than or equal to 425 °C - Technical Specification

DIN EN 3672:2017 航空航天系列.30°型铁用镀银NI-P101HT(沃斯帕洛伊合金)耐热镍基合金自锁紧带柄螺母.等级:1210MPa(室温)/730℃;德文和英文版本EN 3672-2016

Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated, for 30° swage - Classification: 1210 MPa (at ambient temperature) / 730 °C; German and English version EN 3672:2016

DIN EN 4072:2017 航空航天系列.铝IVD涂层钛合金制短螺纹粗容差标称手柄斜十字凹槽盘100°标称埋头螺钉.分类:1100 MPa(环境温度)/425℃.德文和英文版本EN 4072

Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance shank, short thread in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 °C; German and English version EN 4072

BS EN 3672:2016 航空航天系列.30°型铁用镀银NI-P101HT型耐热镍合金(沃斯帕洛伊合金)自锁紧带柄螺母.分类:1210MPa(室温)/730℃

Aerospace series. Shank nuts, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated, for 30C swage. Classification. 1 210 MPa (at ambient temperature) / 730C

BS EN 4178:2017 航空航天系列.MoS2润滑的阳极氧化处理的、钛合金中等长度螺纹粗公差标准柄六瓣凹槽平头螺钉.分类:1100 MPa(室温下)/315°C

Aerospace series. Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated. Classification: 1 100 MPa (at ambient temperature) / 315 C

DIN EN 4162:2017 航空航天系列.镀镉合金钢中长度螺纹粗公差标称柄偏十字形凹槽埋头100°螺钉.分类:1100MPa(室温)/235℃

Aerospace series - Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 °C; German and English version

DIN 65501:2016 航空航天系列.带MJ螺纹铆接螺母垫片

Aerospace series - Shims for anchor nuts with MJ-thread

DIN 65480:2016 航空航天系列.耐腐蚀钢制带凸缘,自锁定和MJ螺纹的六角螺母.等级:1 100 MPa/315℃;德文和英文文本

Aerospace series - Hexagon nuts with flange and MJ thread, self-locking, corrosion-resisting steel - Class: 1100 MPa/315 °C; Text in German and English

DIN 65428:2016 航空航天系列.带凸头的紧固件用壁厚为0.25mm的衬套.德文和英文文本

Aerospace series - Sleeves - Wall thickness 0,25 mm, for fasteners with protruding head; Text in German and English

DIN 65526:2016 航空航天系列.钛合金制带短长度MJ螺纹的紧公差六角头螺栓.使用温度315℃及其以下，公称抗拉强度1100MPa.德文和英文文本

Aerospace series - Hexagon bolts, close tolerance, with short-length MJ thread, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C; Text in German and English

DIN 65358:2016 航空航天系列.螺母和相关螺纹部件用制动力矩的试验.带有ISO公制螺纹的试验螺栓

Aerospace series - Testing of locking torques for nuts and related threaded parts - With ISO metric screw thread, test bolts

DIN 65208:2016 航空航天系列. 带MJ螺纹的螺母和相关螺纹件的锁紧力矩试验. 试验螺栓

Aerospace series - Testing of locking torques for nuts and related threaded parts with MJ thread - Test bolts