V21 管件、卡箍、密封件 标准查询与下载

SAE AS18280C-2008 3000psi 24°锥形非扩口液体连接配件

This SAE Aerospace Standard (AS) establishes the requirements for 24 degree cone flareless fluid connection fittings and nuts, internally or externally swaged, preset, or welded sleeves for use in aircraft fluid systems at nominal operating pressures up to and including 3000 psi. Fittings shall be furnished in the types and styles designated by the applicable AS, MS, NAS standard drawings. This specification includes the requirements for flareless fittings used with externally preset bite type sleeves and also for machined acorn fitting ends such as NAS1760, AS4458, and AS4703. It is intended to serve as a procurement specification for the fittings described herein and in Section 6. The requirements for externally preset bite type sleeves are given in AS18280/1. The requirements for swaged or welded sleeves and tube ends are given in AS18280/2.

Fittings, 24° Cone Flareless, Fluid Connection, 3000 psi

SAE AS18280/1A-2008 3000psi管套咬合型24°锥形非扩口配件

This SAE Aerospace Standard (AS) establishes the requirements for bite type sleeves for use with 24° cone flareless fluid connection fittings per AS18280.

Sleeve, Bite Type, 24° Cone Flareless Fitting, 3000 psi

DIN EN 3630:2008 航空航天系列.直式法兰连接的流体配件.0.8mm管厚用O形密封环密封

The purpose of this standard is to define the characteristics of the fluid fittings, flanged, straight, sealing by O-ring, for 0,8 mm thick tubes. NOTE Flanged fitting installation hole and assembly, see EN 3633 and TR 3634.

Aerospace series - Fluid fittings, flanged, straight - Sealing by O-ring for 0,8 mm thick tubes; German and English version EN 3630:2008

DIN EN 3631:2008 航空航天系列.90°弯头法兰连接的流体配件. 0.8mm厚管道用O型密封圈密封

The purpose of this standard is to define the characteristics of the fluid fittings, flanged, 90~ elbowed, sealing by O-ring, for 0,8 mm thick tubes. NOTE Flanged fitting installation hole and assembly, see EN 3633 and TR 3634.

Aerospace series - Fluid fittings, flanged, 90° elbowed - Sealing by O-ring for 0,8 mm thick tubes; German and English version EN 3631:2008

DIN EN 3781:2008 航空航天系列.弹簧绕制固定环用槽.设计标准

This standard defines the groove dimensions for retaining rings. It is applicable for rings as per MA4016 for use on external grooves and rings as per MA4017 for use on internal grooves.

Aerospace series - Grooves for spiral wound retaining rings - Design standard; German and English version EN 3781:2008

QJ 3309-2008 不锈钢纤维过滤器和滤芯规范

Specification for Stainless Steel Fiber Filters and Elements

DIN EN 3746:2008 航空航天系列.氟硅酮橡胶(FVMQ)O型密封圈.硬度为80 IRHD

This standard specifies the characteristics of O-rings in fluorosilicone rubber FVMQ, hardness 80 IRHD, for aerospace applications. They are intended to be used in air, mineral/synthetic oil and fuel systems. Operating conditions - Temperature: a) Continuous operation: - 55 ℃ to 150 ℃; b) Intermittent service: - 55 ℃ to 200 ℃. Limitation: not to be used with phosphoric ester type hydraulic fluids (permanent or temporary immersion).

Aerospace series - O-rings, in fluorosilicon rubber (FVMQ) - Hardness 80 IRHD; German and English version EN 3746:2007

DIN EN 3633:2008 航空航天系列.法兰连接的液体配件用安装孔

This standard specifies the dimensions of the installation holes and the design bosses and installation recesses for flanged fluid to EN 3630 and EN 3631, and method of callout on drawings.

Aerospace series - Installation hole for fluid fittings, flanged; German and English version EN 3633:2008

NF L43-233:2008 航空航天系列.焊接边缘.几何结构

Aerospace series - Weld lip - Geometrical configuration.

BS EN 3630:2008 航空航天系列.直通法兰连接的流体配件.0.8mm粗管用O型密封环密封

Aerospace series - Fluid fittings, flanged, straight - Sealing by O-ring for 0,8 mm thick tubes

SAE AS5420D-2008 125 psig线性硅树脂加热便携式水管配件采购规范

This SAE Aerospace Standard (AS) covers the requirements for a flexible, lightweight, low pressure, self-extinguishing,integrally heated silicone hose assembly. The hose has a fully fluorinated fluoropolymer inner liner and is primarily intended for use in aircraft potable water systems with an environmental operating temperature range of -65 °F (-54 °C) to +160 °F (+71 °C).

Hose Assembly, Heated, 125 psig, Lined Silicone, Potable Water, Procurement Specification

DIN EN 4028:2008 航空航天系列 钛合金中8°30′管接头 运转中带止推金属丝螺母的三通管

This standard specifies the characteristics of tees, with thrust wire nut on run, for pipe couplings 80°30', in titanium alloy, for aerospace applications. Nominal pressure: up to 28 000 kPa Temperature range: - 55 ℃ to 135 ℃

Aerospace series - Pipe coupling 8°30 in titanium alloy - Tees with thrust wire nut on run; German and English version EN 4028:2001

SAE AS5176C-2008 扩口套筒式配件

FITTING, SLEEVE, FLARED

FITTING, SLEEVE, FLARED

BS EN 3633:2008 航空航天系列.法兰连接的流体配件用安装孔

Aerospace series - Installation hole for fluid fittings, flanged

SAE AS9902B-2008 预成型包装AS8879螺纹型机器螺纹钻孔塞(UNS S34700)

Plug, Machine Thread Drilled, Preformed Packing AS8879 Thread (UNS S34700)

Plug, Machine Thread Drilled, Preformed Packing AS8879 Thread (UNS S34700)

SAE AS33514C-2008 非扩口式管道连接件和密封垫片配件终端的标准尺寸规格

Fitting End, Standard Dimensions for Flareless Tube Connection and Gasket Seal

Fitting End, Standard Dimensions for Flareless Tube Connection and Gasket Seal

SAE AS21904C-2008 90°弯头非扩口管

Elbow, Flareless Tube, 90°

Elbow, Flareless Tube, 90°

SAE AS21902C-2008 非扩口管活接头

Union, Flareless Tube

Union, Flareless Tube

SAE AS21911C-2008 使用内螺纹闷头三通非扩口管

Tee, Bulkhead, Flareless Tube, Internal Thread on Run

Tee, Bulkhead, Flareless Tube, Internal Thread on Run

SAE AS21912C-2008 使用的三通非扩口闷头管

Tee, Flareless Tube with Bulkhead on Run

Tee, Flareless Tube with Bulkhead on Run