V22 机械配件、构件 标准查询与下载

QJ 3296.4-2008 蜂窝夹层结构用镶嵌件 第4部分：通孔螺纹A型镶嵌件

Inserts for honeycomb sandwich structures - Part 4: Through-hole threaded A-type inserts

QJ 3296.2-2008 蜂窝夹层结构用镶嵌件 第2部分：通孔B型镶嵌件

Inserts for honeycomb sandwich structures Part 2: Through-hole B-type inserts

QJ 3295-2008 蜂窝夹层结构用镶嵌件通用规范

General specification for inserts for honeycomb sandwich structures

QJ 3296.11-2008 蜂窝夹层结构用镶嵌件 第11部分：盲孔自锁镶嵌件

Inserts for honeycomb sandwich structures - Part 11: Blind hole self-locking inserts

QJ 3294-2008 蜂窝夹层结构用镶嵌件安装要求

Installation requirements for inserts for honeycomb sandwich structures

QJ 3296.10-2008 蜂窝夹层结构用镶嵌件 第10部分：通孔自锁镶嵌件

Inserts for honeycomb sandwich structures - Part 10: Through-hole self-locking inserts

QJ 3296.5-2008 蜂窝夹层结构用镶嵌件 第5部分：通孔螺纹B型镶嵌件

Inserts for honeycomb sandwich structures - Part 5: Through-hole threaded Type B inserts

QJ 3296.3-2008 蜂窝夹层结构用镶嵌件 第3部分：通孔C型镶嵌件

Inserts for honeycomb sandwich structures - Part 3: Through-hole C-shaped inserts

QJ 3296.9-2008 蜂窝夹层结构用镶嵌件 第9部分：沉头孔镶嵌件

Inserts for honeycomb sandwich structures - Part 9: Counterbore inserts

SAE AS3220A-2008 非扩口式铝制套管配件

Fitting, Sleeve, Flared, Aluminum

Fitting, Sleeve, Flared, Aluminum

AIA/NAS NAS 516-2008 嵌入式.1250英寸驱动的润滑配件修订第9版

FITTING, LUBRICATION, .1250 INCH DRIVE, FLUSH TYPE REV 9

FITTING, LUBRICATION, .1250 INCH DRIVE, FLUSH TYPE REV 9

DIN EN 4033:2008 航空航天系列.机身滚动轴承.耐腐蚀钢性单排滚珠轴承.内半径公差递减的直径级别8和9.尺寸和荷载

This standard specifies the characteristics of rigid single row ball bearings, in corrosion resisting steel, reduced internal radial clearance, diameter series 8 and 9 , designed to withstand only slow rotations and oscillations under load. They are intended for use between fixed and moving parts of the aircraft structure and their control mechanisms They are intended to be used in the temperature range: - 54 ℃ to 150 ℃. However, being lubricated with the following greases: very high pressure grease, ester type (code A), operational range - 73 ℃ to 121 ℃ or very high pressure grease, synthetic hydrocarbons, general purpose (code B), operational range - 54 ℃ to 177 ℃ (see EN 3280), their field of application when lubricated with code A grease is limited to 121 ℃.

Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 8 and 9, reduced internal radial clearance - Dimensions and loads; German and English version EN 4033:2007

DIN EN 4034:2008 航空航天系列.机体旋转轴承.耐腐蚀钢中带法兰外圈内径间隙递减的自准双列自调滚珠轴承.尺寸和负荷

This standard specifies the characteristics of self-aligning double row ball bearings with flanged outer ring in corrosion resishn9 steel, reduced internal clearance, designed to withstand only slow rotations and oscillations under load. They are intended for use between fixed and moving parts of the aircraft structure and their control mechanisms They are intended to be used in the temperature range: - 54 ℃ to 150 ℃. However. being lubricated with the following greases: - very high pressure grease, ester type (code A), operational range - 73 ℃ to 121 ℃ or - very high pressure grease, synthetic hydrocarbons, general purpose (code B), operational range - 54 ℃ to 177 ℃ (see EN 3280), their field of application when lubricated with code A grease is limited to 121 ℃.

Aerospace series - Bearings, airframe rolling - Double row self-aligning ball bearings with flanged outer ring in corrosion resisting steel, reduced internal radial clearance - Dimensions and loads; German and English version EN 4034:2007

JIS F 9900-2:2008 (飞机的)尾桁规范.第2部分:连接器

この規格は。海上に流出した油の拡散を防止するために使用する，オイルフエンスの接続部(以下，接続部という。)の設計.製造などに関する要件について規定する。

Specification for boom -- Part 2: Conectors

JIS F 9900-1:2008 (飞机的)尾桁规范.第1部分:机身

この規格は，主として海上に流出した油の拡散を防止するために使用する，オイルフエンスの本体部(以下，本体部という。)の設計，製造などに関する要件について規定する。

Specification for boom -- Part 1: Body

HB 7831-2008 单按钮大载荷承力快卸锁

本标准规定了单按钮大载荷承力快卸锁（以下称快卸锁）的结构、尺寸和技术要求。 本标准适用于飞机外形曲率半径不小于400mm、载荷不大于980N的口盖。

Singl button bearing latches with quick-operating

HB 6866-2008 长衬套销钉快卸锁

本标准规定了长衬套销钉快卸锁（以下简称锁）的结构和尺寸。 本标准适用于飞机、直升机的机身和发电机舱口盖及其他部件。

Long liner pin quick-operating latch

HB 6867-2008 带衬套销钉快卸锁

本标准规定了带衬套销钉快卸锁（以下简称锁）的结构和尺寸。 本标准适用于飞机、直升机的机身和发电机舱口盖及其他部件。

Liner quick-operating latch

DIN EN 3059:2008 航空航天系列.飞机机架滚动轴承.法兰连接的镀镉飞机机架用刚性单列滚珠轴承.尺寸和负荷

This standard specifies the characteristics of rigid single row ball bearings in steel, with cadmium-plated flanged alignment housing designed to withstand only slow rotations and oscillations under load. They are intended for use in the hubs of torsion lever and in separated supports for airframe/aerospace applications. The airframe rolling bearings defined in this standard may be used in the temperature range from - 54 ℃ to 150 ℃. However, being lubricated with the following greases (see EN 3727): -- ester type very high pressure grease (code letter A), operating range from - 73 ℃ to 121 ℃ or, -- synthetic hydrocarbons type very high pressure grease general purpose (code letter B) operating range from - 54 ℃ to 177 ℃. Their field of application when lubricated with code letter A grease is limited to 121 ℃.

Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel with flanged alignment housing, cadmium plated - Dimensions and loads; German and English version EN 3059:2007

DIN EN 3060:2008 航空航天系列.机架转动轴承.带镀镉法兰定位机架的镀镉钢中刚性单列滚珠轴承.尺寸和负荷

This standard specifies the characteristics of rigid single row ball bearings in steel, cadmium-plated with cadmium plated flanged alignment housing designed to withstand only slow rotations and oscillations under load. They are intended for use in the hubs of torsion lever and in separated supports for airframe/aerospace applications. The airframe rolling bearings defined in this standard may be used in the temperature range from - 54 ℃ to 150 ℃. However, being lubricated with the following greases (see EN 3727): -- ester type very high pressure grease (code letter A), operating range from - 73 ℃ to 121 ℃ or, -- synthetic hydrocarbons type very high pressure grease general purpose (code letter B) operating range from - 54 ℃ to 177 ℃. Their field of application when lubricated with code letter A grease is limited to 121 ℃.

Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated, with flanged alignment housing, cadmium plated - Dimensions and loads; German and English version EN 3060:2007