共找到 548 条与 航空器及其附件综合 相关的标准,共 37 页
本标准规定了无人机北斗定位导航系统定型试验的基本要求、试验项目和试验方法。 本标准适用于无人机北斗定位导航系统(以下简称被试品)定型试验、鉴定试验、交验试验和科研摸底试验等亦可参照使用。
Test regulations for Bei-Dou position and navigation system loaded in UAV
本规范规定了通信干扰无人机(系统)的通用技术要求、质量保证规定和交货准备等。 本规范适用于固定翼通信干扰无人机(系统)的研制、生产和检验,是拟制通信干扰无人机(系统)产品规范(以下简称产品规范)的基本依据。
General specification for communication jamming UAV
本规范规定了机载干扰器材投放设备的基本要求、质量保证规定及交货准备等。 本规范适用于机载干扰器材引爆式投放设备(简称I型投放设备)和机载干扰器材机电式投放设备(简称II型投放设备)的研制、生产和检验,是编制机载干扰器材投放设备(简称投放设备)产品规范的基本依据。
General specification for airborne jamming materiel dispensing equipments
本标准规定了无人侦察机成像侦察任务载荷(以下简称成像任务载荷)的分类、总体性能要求、主要战术技术项目及使用要求。 本标准适用于无人侦察机成像任务载荷及其配套设备的选择,并为系统总体论证、设计提供依据。
Requirement for unmanned reconnaissance aerial vehical imaging reconnaissance payload
本标准规定了火箭助推零长发射、伞降回收的通用型无人机(简称无人机)的内场、外场、飞行、撤收等操作使用要求,以及维护保养、贮存运输要求。 本标准适用于无人机的操作使用和维护保养。
Requirements for operation and application of general UAV
Space systems - Unmanned spacecraft operational procedures - Documentation
This International Standard describes the identification of critical non-flight items in space flight hardware and the procedure to account for their complete removal prior to flight. This International Standard is used in context with project-specific quality requirements and procedures related to flight hardware and related activities prior to launch and at the launch site. Verification of removal of critical non-flight items is described in this International Standard. Removal of other non-flight items is outside the scope of this International Standard and is verified by relevant inspection procedures.
Space systems — Non-flight items in flight hardware — Identification and control
Space systems - Flywheel module design and testing
Medical vehicles and their equipment - Air ambulances - Part 2 : operational and technical requirements of air ambulances.
本标准规定了在低速风洞中进行直升机常规旋翼模型试验的基本方法。 本标准适用于在低速风洞中进行的直升机旋翼模型试验。在其它试验场所进行的旋翼模型试验,可参考使用本标准。
Test method of helicopter rotor model in low speed wind tunnel
本规范规定了军用直升机滑油系统的能用要求。 本规范适用于军用直升机滑油系统设计、制造、鉴定和验收。
General specification for the lubrication system of military helicopter
本部分规定了军用飞机复合材料结构(用玻璃纤维和高性能连续纤维增强体,如碳纤维、硼纤维、芳纶等与聚合物构成的复合材料机体结构)的设计要求,并规定了为满足复合材料结构完整性所必需的验证要求。本部分未提及的内容均应按GJB 67其他部分的规定执行。 本部分适用于各类军用飞机(不含直升机)的设计、验证和订货。本部分也是签订合同的依据之一,对于具体型号应按合同条款执行。
Military airplane structural strength specification.Part 14: Composite structures
本标准规定了军用直升机检验验收的内容、程序和方法等要求。 本标准适用于军用直升机的检验验收。返修直升机的检验验收亦可参照执行。
Requirements of inspection and acceptance for military helicopter
Structural types and dimensions of modular cabinets Part 6: Appearance and dimension series of accessories
Structural types and dimensions of modular cabinets Part 2: Structure and dimension series of frames
Structural types and dimensions of modular cabinets Part 1: Outline and dimension series of the whole machine
Structural types and dimensions of modular cabinets Part 3: Column structure and dimension series
Structural types and dimensions of modular cabinets Part 4: Structure and dimension series of beams
Structural types and dimensions of modular cabinets - Part 5: Structure and dimension series of doors
This standard specifies the characteristics of open ring insert tools for splined nuts, metric for aerospace applications.
Aerospace series - Open ring insert tool, square drive
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号