V91 刀具 标准查询与下载

HB 7167-1995 微型立铣刀技术条件

本标准规定了微型立铣刀的技术要求、试验方法、检验规则和标志包装的基本要求。 　　本标准适用于二齿、三齿和四齿微型立铣刀（以下简称立铣刀）。

Micro end mill technical conditions

HB 7165-1995 四齿削平型直柄微型立铣刀

Four-tooth flat-cutting straight shank mini-end-milling-cutter

HB 7156-1995 数控机床用加工铝合金的整体硬质合金 直柄钻铰刀、半月钻、扁钻技术条件

Integral hard alloy straight shank drill reamer, half-moon drill, and flat drill technical conditions for machining aluminum alloys for CNC machine tools

HB 7155-1995 数控机床用加工铝合金的整体硬质合金 直柄扁钻 d=2～8mm

Integral hard alloy straight shank flat drill d=2~8mm for machining aluminum alloy for CNC machine tools

HB 7154-1995 数控机床用加工铝合金的整体硬质合金 直柄半月钻 d=2～8mm

Integral hard alloy straight shank half-moon drill d=2~8mm for machining aluminum alloy for CNC machine tools

HB 7153-1995 数控机床用加工铝合金的整体硬质合金 平顶直柄钻铰刀 d=2～10mm

Integral hard alloy flat top straight shank drill reamer d=2~10mm for CNC machine tools

HB 7152-1995 数控机床用加工铝合金的整体硬质合金 锥顶直柄钻铰刀 d=2～10mm

Integral hard alloy cone top straight shank drill reamer d=2~10mm for CNC machine tools

HB 7142-1995 整体硬质合金微型立铣刀技术条件

本标准规定了整体硬质合金微型立铣刀的技术要求、试验方法、检验规则和标志、包装的基本要求。 　　本标准适用于整体硬质合金两齿、三齿和四齿微型直柄立铣刀（以下简称立铣刀）。

Specifications for Solid Carbide Micro End Mills

HB 7141-1995 整体硬质合金四齿端刃过中心 直柄微型立铣刀 d=2～3mm

Solid carbide four-tooth edge through the center straight shank miniature end mill d=2~3mm

HB 7140-1995 整体硬质合金四齿直柄微型立铣刀 d=2～3mm

Solid carbide four-tooth straight shank miniature end mill d=2~3mm

HB 7246-1995 加工钛合金MJ螺纹用套装式螺纹铣刀 d=40～100mm P=1.00～3.00mm

Set type thread milling cutter for processing titanium alloy MJ thread d=40~100mm P=1.00~3.00mm

HB 7245-1995 加工钛合金MJ螺绞用套装式螺纹铣刀 d=40～100mm P=1.00～3.00mm

Set-type thread milling cutter for processing titanium alloy MJ screw strands d=40~100mm P=1.00~3.00mm

HB 7244-1995 加工钛合金MJ螺绞用莫氏圆锥柄螺纹铣刀 d=25.0～32.0mm P=1.00～2.50mm

Morse taper shank thread milling cutter for processing titanium alloy MJ screw twist d=25.0~32.0mm P=1.00~2.50mm

HB 7243-1995 加工钛合金MJ螺纹用莫氏圆锥柄螺纹铣刀 d=10.0～20.0mm P=0.75～2.50mm

Morse taper shank thread milling cutter for processing titanium alloy MJ thread d=10.0~20.0mm P=0.75~2.50mm

HB 7247-1995 加工钛合金MJ螺纹用螺纹铣刀技术条件

本标准规定了加工钛合金MJ螺纹用螺纹铣刀的技术要求、试验方法、检验规则和标志包装的基本要求。 　　本标准适用于HB7243～7246-95加工钛合金MJ螺纹用螺纹铣刀。

Specifications for thread milling cutters for machining titanium alloy MJ threads

HB 7139-1995 整体硬质合金三齿端刃过中心直柄微型立铣刀 d=1.5～3mm

Solid carbide three-tooth edge through the center straight shank miniature end mill d=1.5~3mm

HB 7138-1995 整体硬质合金三齿直柄微型立铣刀 d=1.5～3mm

Solid carbide three-tooth straight shank miniature end mill d=1.5~3mm

HB 7166-1995 四齿端刃过中心削平型直柄微型立铣刀

Four-tooth end cutting edge over-center flat-cutting type straight shank mini-end-milling-cutter

QJ 2738.3-1995 MJ螺纹丝锥 短柄螺母丝锥

MJ Thread Tap Short Shank Nut Tap

QJ 2738.4-1995 MJ螺纹丝锥 长柄螺母丝锥

MJ Thread Tap Long Shank Nut Tap