V92 量具 标准查询与下载

HB 4201-1989 单头针式光滑塞规用手柄（D=0.1～3mm）

Handle for single-ended smooth plug gauge (D=0.1~3mm)

HB 1992-1989 单头套量头塞规用手柄 d=16～27mm

Handle d=16~27mm for single-head measuring head plug gauge

HB 4233-1989 ＭＪ螺纹校对塞规 校通－通ＴＴ ＭＪ１．６×０．３５~ＭＪ５×０．８

ＭＪthread reference plug gauge JT－T(ＴＴＴＴ ＭＪ1．6×0．35~ＭＪ5×0．8

HB 4204-1989 深度测具（L=0～300mm）

Depth measuring tool (L=0~300mm)

HB 4232-1989 ＭＪ螺纹校对塞规 校止－通ＺＴ 校止－止ＺＺ 校止－损ＺＳ ＭＪ６×１~ＭＪ３９×２

ＭＪthread reference plug gauge JZ－T(ＺＴ)JZ－Z(ＺＺ)JZ－S(ＺＳ) ＭＪ6×1~ＭＪ39×2

HB 4220-1989 万能百分表用表杆接头

Universal dial indicator rod connector

HB 4231-1989 ＭＪ螺纹校对塞规 校止－通ＺＴ 校止－止ＺＺ 校止－损ＺＳ ＭＪ１．６×0.35~ＭＪ５×0.8

ＭＪthread reference plug gauge JZ－T(ＺＴ)JZ－Z(ＺＺ)JZ－S(ＺＳ) ＭＪ1．6×0.35~ＭＪ5×0.8

HB 4203-1989 测量头

Measuring head

HB 4230-1989 ＭＪ螺纹校对塞规 校通－止ＴＺ 校通－损ＴＳ ＭＪ６×１~ＭＪ３９×２

ＭＪthread reference plug gauge JT－Z(ＴＺ)JT－S(ＴＳ) ＭＪ6×1~ＭＪ39×2

HB 4224-1989 ＭＪ内螺纹小径用针式量头双头光滑塞规 ＭＪ１．６~ＭＪ３

Pin type gauge head double-end plain plug gaugeＭＪ1．6~ＭＪ3 used for ＭＪinternal screw thread small diameter

HB 4225-1989 ＭＪ内螺纹小径用圆锥尾量头双头光滑塞规 ＭＪ３．５~ＭＪ３９

Taper tail gauge head double-end plain plug gaugeＭＪ3．5~ＭＪ39forＭＪinternal screw thread small diameter

HB 4207-1989 内孔空刀槽径用游标卡尺

Vernier caliper for inner hole clearance groove diameter

HB 4226-1989 ＭＪ螺纹塞规 ｄ＝１．６~５ｍｍ Ｐ＝０．３５~０．８ｍｍ

ＭＪthread plug gauge ｄ＝1．6~5ｍｍ Ｐ＝0．35~0．8ｍｍ

HB 4185-1989 端齿盘

本标准规定了端齿盘的主要性能参数、结构、精度及标记。 　　本标准适用于对称加工，端齿盘是控制一般角度和位置公差用的机械式极座标元件，亦用于圆周精密分度及精确定位。

End tooth disc

HB 4206-1989 壁厚游标卡尺

Vernier caliper for wall thickness

HB 4227-1989 ＭＪ螺纹塞规 ｄ＝６~３９ｍｍ Ｐ＝１~２ｍｍ

ＭＪthread plug gauge ｄ＝6~39ｍｍ Ｐ＝1~2ｍｍ

HB 1996-1989 校对量规及对表件用垫圈

Calibration gauges and gaskets for gauge parts

HB 1995-1989 校对量规及对表件用垫圈

Calibration gauges and gaskets for gauge parts

HB 2055-1989 深度测杆

depth rod

HB 799-1989 塞规卡规用硬质合金片毛坯

Carbide sheet blanks for plug gauges and snap gauges