V95 工具 标准查询与下载

SAE AS81306/1-2010 AS85049/128连接头辅助电缆屏蔽终端带用一步手动安装工具

Band Installation Tool, Hand, One-step, for AS85049/128 Connector Accessory Cable Shield Terminating Bands

DIN EN 4355:2009 航空航天系列.六角形凹槽.插座旋具

This standard specifies the characteristics of drivers, socket, six lobe recess, for aerospace applications.

Aerospace series - Six lobe recess - Drivers, socket; German and English version EN 4355:2008

DIN EN 4302:2009 航空航天系列.方形驱动开环插入工具

This standard specifies the characteristics of open ring insert tools for splined nuts, metric for aerospace applications.

Aerospace series - Open ring insert tool, square drive; German and English version EN 4302:2008

DIN EN 3710:2008 航空航天系列.双六角套筒.技术规范

This standard specifies the properties of double-hex sockets for aerospace use.

Aerospace series - Sockets, bi-hexagonal - Technical specification; German and English version EN 3710:2008

DIN EN 3711:2008 航空航天系列.双六角双头扳手.曲柄直线偏移量

This standard specifies the properties of the following types of double end box wrenches: double head fiat, double head offset and double end modified offset.

Aerospace series - Wrench-double ended, bi-hexagonal - Straight, cranked, offset; German and English version EN 3711:2008

DIN EN 3819:2008 航空航天系列.扳手和和套管的间隙

This standard defines the minimum clearance area required around nuts and bolt heads when using either double hexagon box or socket wrenches defined in AECMA standard,

Aerospace series - Clearance for wrenches and sockets; German and English version EN 3819:2008

SAE AS5259-2008 通用冲模和非冲模尺寸为8～700KCMIL的电气压接工具和附件

Crimping Tool and Accessories, Electrical, Size 8 to 700 KCMIL, General Purpose Use, Die and Dieless

SAE AS5869B-2008 5080 PSI液压轴向陷型3孔法兰连接组装配件

Fitting Assembly, Union, 3 Hole Flange, Axially Swaged, Hydraulic, 5080 PSI

Fitting Assembly, Union, 3 Hole Flange, Axially Swaged, Hydraulic, 5080 PSI

SAE AS5768-2008 电绝缘剥离工具用一般规范

1.1 Specification RequirementsThis specification covers design requirements, performance requirements, and methods of procurement for tools and associated accessories used to strip aerospace vehicle electrical wire and cable. Aerospace vehicle electrical wire has stranded conductors with protective plating and specialized insulation. Poor quality wire strippers or mismatched blades can compromise the performance of wiring.1.2 Intended UseThe purpose of this specification is to define the electrical wire or cable tool’s design performance, interchangeability,repeatability, and reliability. The specification establishes standard criteria for the design, manufacture and qualification ofstripping tools. Wire or cable stripped by the tool shall be specified with the tool (see 3.1.1). The specification provides a system of procurement and quality control of specified wire stripping tools.1.3 QualificationProducts procured from this specification require a supplier to be on a Qualified Product List at the time of request for purchase (see 6.4).1.4 Part Number StructureUnless otherwise specified in the detail specification the part number structure for the tool shall be AS5768/Y – XXXX

Tool, Stripper, Electrical Insulation, General Specification For

SAE AS5768/1-2008 手动电气绝缘圆线尺寸为10至30的剥离工具

PRIOR TO RELEASE OF THIS DOCUMENT THERE WAS NO STANDARDIZATION OF INSULATION STRIPPING TOOLSOR SPECIFIC REQUIREMENTS FOR PERFORMANCE. THESE TOOLS WERE TYPICALLY PROCURED BYMANUFACTURER PART NUMBERS.

Tool, Stripper, Manually Actuated, Electrical Insulation, Round Wire, Size 10 to 30

BS EN 3710:2008 航空航天系列.十二角套筒扳手.技术规范

This standard specifies the properties of double-hex sockets for aerospace use.

Aerospace series - Sockets, bi-hexagonal - Technical specification

GJB 6208-2008 航空用花键型扳拧结构和尺寸

本标准规定了航空用花键型扳拧结构形式、尺寸、公差和标记方法。 本标准适用于航空用花键型扳拧结构的设计和制造，其他行业可参照执行。

Spline wrenching configuration and dimension for aerospace

CEN EN 4302-2008_ 航空系列.方形传动开环插入工具

This standard specifies the characteristics of open ring insert tools for splined nuts, metric for aerospace applications.

Aerospace series - Open ring insert tool, square drive

DIN EN 4359:2008 航空航天系列.六角形凹槽旋具.技术规范

This standard specifies the characteristics, qualification and acceptance requirements for drivers for installing and removing screws and bolts having six lobe recess internal drive.

Aerospace series - Six lobe recess - Drivers - Technical specification; German and English version EN 4359:2006

DIN EN 4108:2008 航空航天系列.爪形扳手和套筒扳手附件

This standard specifies the characteristics of crow foot wrenches for splined nuts for aerospace applications.

Aerospace series - Wrenches, crow foot, attachment socket, socket drive; German and English version EN 4108:2006

DIN EN 4109:2008 航空航天系列.端面扳手

This standard specifies the characteristics of spanner face wrenches for splined nuts for aerospace applications.

Aerospace series - Wrenches, face spanner; German and English version EN 4109:2006

DIN EN 4110:2008 航空航天系列.开端套筒扳手

This standard specifies the characteristics of open end box wrenches for splined nuts for aerospace applications.

Aerospace series - Wrenches, open end, box; German and English version EN 4110:2006

DIN EN 4357:2008 航空航天系列.六角形凹槽旋具柄

Aerospace series - Six lobe recess - Drivers, handle; German version EN 5347:2006

DIN EN 4356:2008 航空航天系列.六角形凹槽短旋具

This standard specifies the characteristics of drivers, short, six lobe recess, for aerospace applications.

Aerospace series - Six lobe recess - Drivers, short; German and English version EN 4356:2006

BS EN 4358:2006 航空航天系列.梅花冲头.双端90度旋具

This standard specifies the characteristics of drivers, double ended, 90°, six lobe recess, for aerospace applications.

Aerospace series - Six lobe recess - Drivers, double ended, 90