W12 棉纱、线 标准查询与下载

DLA MIL-DTL-32072-2002 涤纶线

This specification covers polyester thread used for machine sewing (see 6.1).

THREAD, POLYESTER [Superseded: DLA V-T-285 F CANC NOTICE 1, DLA V-T-285 F, DLA V-T-285 E, DLA V-T-285 D, DLA V-T-285 C (2), DLA V-T-285 C INT AMD 1, DLA V-T-285 C, DLA V-T-285 B (4), DLA V-T-285 B INT AMD 3, DLA V-T-285 B (2), DLA V-T-285 B I

FZ/T 12010-2001 棉氨纶包芯本色纱

本标准规定了棉氨纶包芯本色纱(棉纤维包氨纶长丝纺制)产品的分类、要求 .试验方法.检验规则 和标志、包装。 本标准适用于鉴定氨纶纤维含量在 5%% ~ 15%%的环锭纺机制棉氨纶包芯本色纱的品质，本标准不 适用于鉴定特种用途棉氨给包芯本色纱的品质。

Cotton covered spandex grey yarn

DLA A-A-2917 VALID NOTICE 1-2001 棉网线

A-A-2917, dated 21 June 1995, has been reviewed and determined to be valid for use in acquistion.

TWINE, COTTON SEINE

ARMY A-A-59125 A-2001 带挡环式和螺纹式阻挡层及连带零件的模塑接线端子板

This CID covers the requirements for one-piece molded, barrier, front-end throughconnection,screw and stud-type terminal boards used for connections in electrical and electronic circuits. This CID also covers the general requirements for bus(jumper) connectors for use with both types of boards and marker strips for use with screw type boards.

TERMINAL BOARDS, MOLDED, BARRIER SCREW AND STUD TYPES AND ASSOCIATED ACCESSORIES

ARMY MIL-PRF-49434 A (1)-2000 AN/PAQ-4C型红外线光瞄

This amendment forms a part of MIL-PRF-49434A, dated 27 August 1997, and is approved foruse by the Department of the Army and is available for use by all Departments and Agencies of theDepartment of Defense.

AIMING LIGHT, INFRARED, AN/PAQ-4C

DLA A-A-50197 A-2000 亚麻线

This document covers linen thread for sewing by machine or hand.

THREAD, LINEN

DLA A-A-50196 B-2000 丝线

This document covers silk thread for sewing by machine or hand.

THREAD, SILK

DLA A-A-50106 B-2000 楔形带线的塞子

This commercial item description covers the requirement for wired stoppersto be used to provide security for personnel and equipment in operations invoking 'steep ascents by placing the wired stoppers into cracks in rocks.

STOPPER, WIRED, WEDGED

JIS L 2101:2000 棉质缝纫线

この規格は，綿縫糸について規定する。

Cotton sewing thread

DLA MS25189 REV C REINST NOTICE 2-2000 I级铜皱纹旗型终端接线片

MS25189C, dated 4 November 1968, is hereby reinstated as inactive for new design.

TERMINAL, LUG, FLAG TYPE, CRIMP STYLE, COPPER, CLASS I

ARMY MIL-STD-252 B VALID NOTICE 1-2000 视觉分类和机械缺陷有线设备

MIL-STD-252B, dated 19 January 1970, has been reviewed and determined to be valid for use in acquistion.

WIRED EQUIPMENT, CLASSIFICATION OF VISUAL AND MECHANICAL DEFECTS

JIS L 1019:1999 棉纤维的试验方法

Testing methods for cotton fiber

DLA AN3050 REV 4 NOTICE 1-1999 柔性导线管及套圈

AN3050 REV 4 , dated 8 October1953, is inactive for new designand is no longer used, exceptfor replacement purposes.

FERRULE AND CONDUIT, FLEXIBLE

ARMY MIL-R-3206 B (1)-1999 RL-39型软电缆绕线机

This commercial item description covers brown kraft paper used for general wrapping applications.

REELING MACHINE, CABLE, HAND, RL-39

DLA A-A-59390-1999 线绳装备块 取代DLA MIL-B-11837 C CANC NOTICE 1,DLA MIL-B-11837 C,DLA MIL-B-11837 B(2),DLA MIL-B-11837 B(1),DLA MIL-B-11837 B,DLA MIL-B-11837 A,DLA MIL-B-12582 C CANC公告1,DLA MIL-B-12582 C,DLA MIL-B-12582 B

This commercial item description (CID) covers single-and multiple-sheave, oval pattern, diamond pattern, snatch, and cargo-hoisting blocks used with wire rope for use in various rigging, lifting, towing, and construction operations.

BLOCKS, TACKLE, WIRE ROPE [Superseded: DLA MIL-B-11837 C CANC NOTICE 1, DLA MIL-B-11837 C, DLA MIL-B-11837 B (2), DLA MIL-B-11837 B (1), DLA MIL-B-11837 B, DLA MIL-B-11837 A, DLA MIL-B-12582 C CANC NOTICE 1, DLA MIL-B-12582 C, DLA MIL-B-12582 B

DLA A-A-59305-1999 双转动架双头螺栓接线端头

This commercial item description covers a double turret, threaded terminal stud for use on terminal boards.

TERMINAL, STUD THREADED DOUBLE TURRET

ASTM D6197-99(2017) 电子试验中细纱分类和计数错误的标准试验方法

5.1 This test method is considered satisfactory for acceptance testing of commercial shipments of spun yarns by agreement between purchaser and supplier. 5.1.1 In case of a dispute arising from differences in reported test results when using this test method for acceptance testing of commercial shipments, the purchaser and supplier should conduct comparative tests to determine if there is a statistical bias between their laboratories. Competent statistical assistance is recommended for the investigation of bias. As a minimum, the two parties should take a group of test specimens that are as homogenous as possible and that are from a lot of material of the type in question. The test specimens should then be randomly assigned in equal numbers to each laboratory for testing. The average result from the two laboratories should be compared using statistical analysis and a probability level chosen by the two parties before the testing is begun. If a bias is found, either its cause must be found and corrected or the purchaser and the supplier must agree to interpret future test results with consideration to the known bias. 5.2 Yarn faults are a factor in determining yarn and fabric quality. 1.1 This test method covers the classifying and counting of faults in spun yarns using capacitance testers. 1.1.1 Protruding fibers or yarn hairiness, or both, are not determined as part of this method. Note 1: For measuring protruding fibers or hairiness, or both, refer to Guide D5647. 1.2 This test method provides for grading yarns by fault level and type. 1.3 This test method is applicable to all single or plied spun yarns from natural or manufactured fibers or blends of each. 1.4 The values stated in SI units are to be regarded as standard; the values in inch-pound units are provided as information only and are not exact equivalents. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Classifying and Counting Faults in Spun Yarns in Electronic Tests

FZ/T 12006-1998 精梳棉涤混纺本色纱线

本标准规定了棉与涤纶(棉型短纤维)混纺，棉混用比例在50%以上的精梳棉涤馄纺本色纱线产品的分类、要求、试验方法、检验规则和标志、包装。 本标准适用于鉴定环锭机制精梳棉涤混纺本色纱线(包括织布用纱和针织用纱)的品质，不适用于鉴定特种用途精梳棉涤混纺本色纱线的品质。

Combed cotton/polyester blended grey yarn

DLA AN3063 REV 3 NOTICE 1-1998 分线盒用90度电缆弯头

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

ELBOW - ELECTRICAL CONDUIT, 90 DEG. JUNCTION BOX

DLA AN3051 REV 5 NOTICE 1-1998 一级柔性导线管及套圈

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

FERRULE AND CONDUIT, FLEXIBLE, ONE STEP