W20 毛纺织综合 标准查询与下载

FZ/T 20008-2015 毛织物单位面积质量的测定

本标准规定了测定毛织物在公定回潮率下的单位面积质量的试验方法。 本标准适用于各类毛织物。

Test for the mass per unit area of wool fabric

FZ/T 20015.6-2015 毛纺产品分类、命名及编号 绒线

FZ/T 20015的本部分规定了绒线的分类、命名及编号。 本部分适用于各类精梳纯毛、毛混纺及非毛纤维仿毛绒线。

Classification,denomination and coding of wool textiles.Knitting yarn

FZ/T 20012-2015 纺纱油剂可洗涤性试验方法

本标准规定了纺纱油剂可洗涤性的试验方法。 本标准适用于毛针织产品中油剂的可洗涤性，也适用于比较毛纺纺纱油剂的相对可洗涤性。

Test method for scourability of spinning lubricant

BS ISO 1136:2015 羊毛. 纤维平均直径的测定. 透气性法

Wool. Determination of mean diameter of fibres. Air permeability method

ISO 1136:2015 羊毛.纤维平均直径的测定.透气性法

This International Standard specifies a method for the determination of the mean diameter of wool fibres, using an apparatus which passes a current of air through a bundle of fibres. This International Standard is applicable to clean, unmedullated wool fibres dispersed in a uniform, open state. It provides a method particularly suitable for combed slivers. The dichloromethane extractable matter content of the specimen must not exceed 1,0 %. It is applicable to oil-combed slivers after cleaning with an organic solvent. The method described in this International Standard is less accurate for lambswool and for wool which is appreciably medullated (see Annex D) and heavily dyed wool.

Wool - Determination of mean diameter of fibres - Air permeability method

EN ISO 18103:2015 超细羊毛织物标签.SuperS代码定义要求

Diese Internationale Norm definiert die Anforderungen an den Kennzeichnungscode "Super S" fur das aus reiner Schurwolle hergestellte fertige Gewebe sowie das Prufverfahren, um diese zu bestimmen.

Superfine woven wool fabric labelling - Requirements for Super S code definition (ISO 18103:2015)

SN/T 4184.3-2015 进出口纺织原料检验规程 第3部分：毛纤维

Inspection Regulations for Import and Export of Textile Raw Materials Part 3: Wool Fiber

KS K 2618-2015 机织地毯

Woven carpet, tuft carpet and tile carpet

ISO 3074:2014 羊毛.在精梳毛条中二氯甲烷可溶物的测定

This International Standard specifies a method for determining the dichloromethane-soluble matter in combed wool sliver. Its use can be extended to wool in other forms. It should be recognized that extraction with dichloromethane under the prescribed conditions does not completely remove all the fatty material present in a Sample of wool. A _ further amount, possibly material ofsimilar charactenr will usually be extracted bythe use ofsolvents that cause greater Swelling of the wool fibres. The method is applicable only to 100 % wool products. LIt can give misleading results ift applied to products in which fibres other than wool are present.

Wool - Determination of dichloromethane-soluble matter in combed sliver

BS ISO 3074:2014 羊毛. 在精梳条子中二氯甲烷可溶物的测定

Wool. Determination of dichloromethane-soluble matter in combed sliver

JIS L 1081:2014 羊毛纤维和动物纤维的测试方法

Testing methods for wool fibres and hairs

FZ/T 20025-2013 毛纱定型效果的测定 回捻退捻法

本标准规定了毛纱定型效果的测定方法。本标准适用于毛纱定型效果的测定,其他纱线定型效果测定可参照执行。

Determination of twist stablity properties of yarn.Untwist method

FZ/T 20026-2013 毛条纤维长度和直径测试方法 光学分析仪法

本标准规定了用纤维长度和直径光学分析仪测定毛条纤维长度和直径及其分布的方法。本标准适用于毛条、绒条,羊毛与化纤混纺条、纯毛型化纤条和特种动物纤维条可参照使用。

Test method for fibre length and diameter of wool top & slivers.Optical analyser

FZ/T 20005-2013 毛纺纯毛和混纺产品的标志

本标准规定了毛纺产品的纯毛和混纺以及性能方面的标志图形及其含义。本标准适用于各种毛纺产品。

Marking of wool and wool blended products

FZ/T 24010-2013 防缩毛纺织产品

本标准规定了防缩毛纺织产品的技术要求、试验方法、检验及验收规则和包装、标志。本标准适用于经过防缩处理的可机洗毛针织类和毛机织类产品。

Shrinkproof wool textiles

SN/T 3507-2013 进出口纺织品中山羊绒和绵羊毛的鉴别 PCR法和实时荧光PCR法

本标准规定了纺织品中山羊绒、绵羊毛鉴别的PCR和实时荧光PCR方法。本标准适用于纺织品中山羊绒、绵羊毛PCR法和实时荧光PCR法的定性鉴别。

Identification of cashmere and wool in textiles for import and export.PCR method and real-time fluorescence PCR method

ASTM D1113-13 洗净羊毛中植物性物质和其它碱性不溶杂质的标准试验方法

5.1 Test Method D1113 is considered satisfactory for acceptance testing of commercial shipments, and the procedure has been used extensively in the trade for this purpose, particularly in connection with the determination of clean wool fiber present by Test Method D584. The procedure in Test Method D1113 is used by the U.S. Customs Service for the determination of the vegetable matter in importations of raw wool on which the allowance for loss of wool during commercial cleaning is based in part.3 5.1.1 In case of a dispute arising from differences in reported test results when using Test Method D1113 for acceptance testing of commercial shipments, the purchaser and the supplier should conduct comparative tests to determine if there is a statistical bias between their laboratories. Competent statistical assistance is recommended for the investigation of bias. As a minimum, the two parties should take a group of test specimens that are as homogeneous as possible and that are from a lot of material of the type in question. The test specimens should then be randomly assigned in equal numbers to each laboratory for testing. The average results from the two laboratories should be compared using Students t-test for unpaired data and an acceptable probability level chosen by the two parties before the testing is begun. If a bias is found, either its cause must be found and corrected or the purchaser and the supplier must agree to interpret future test results in light of the known bias. 1.1 This test method covers the determination of the content of oven-dried, ash-free, alcohol extractive-free vegetable matter and other alkali-insoluble impurities present in scoured wool. It is also applicable to “related fibers” such as the hair from the goat, camel, alpaca, and other animals. Note 1—The determination of clean wool fiber present on a laboratory scale is covered in Test Method D584, the determination of clean wool fiber present on a commercial scale is covered in Test Method D1334, and the calculation of commercial weight and yield of various commercial compositions (formerly covered in Appendix to Test Method D584) is covered in Practice D2720. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific safety hazard statements, see Section 8.

Standard Test Method for Vegetable Matter and Other Alkali-Insoluble Impurities in Scoured Wool

ASTM D1234-13 含脂羊毛手扯长度的取样和测试用标准试验方法

5.1 The testing procedure in this test method for the determination of staple length is considered satisfactory for acceptance testing of commercial shipments of grease wool since the test method has been used in the trade for acceptance testing. 5.1.1 In case of a dispute arising from differences in reported test results when using this test method for acceptance testing of commercial shipments, the purchaser and the supplier should conduct comparative tests to determine if there is a statistical bias between their laboratories. Competent statistical assistance is recommended for the investigation of bias. As a minimum, the two parties should take a group of test specimens that are as homogeneous as possible and that are from a lot of material of the type in question. The test specimens should then be randomly assigned in equal numbers to each laboratory for testing. The average results from the two laboratories should be compared using Student's t-test for unpaired data and an acceptable probability level chosen by the two parties before the testing is begun. If a bias is found, either its cause must be found and corrected, or the purchaser and the supplier must agree to interpret future test results in the light of the known bias. 5.2 The test method is used for the determination of the average unstretched staple length and the staple length distribution of a lot of wool in order to assign length classes when determining the conformance of lots and shipments to length specifications. 5.3 In this test method, the size of a lot covered by the test procedure is limited to not more than 200 packages per test. Any shipment exceeding the above limits is divided into lots within the prescribed limits. 5.4 The nature of the sampling procedure is such that grease wool staples as originally drawn from the wool of the lot require only a slight amount of preparation before measurement. The bulk and laboratory samples are synonymous in this test method. 5.5 Compression of wool in the bale makes it difficult to penetrate the interior of the bale with the sampling tool. However, staples can be drawn from the surface of the bale with the sampling tool or by hand. 5.6 Practice D4271 contains information on how to write a section on sampling in test methods.Note 2—An extensive discussion of grease wool staple sampling can be found in the literature.5 1.1 This test method2 covers procedures for sampling and measuring the unstretched staple length, and variability in length, of grease or pulled wool staples. The test method is also applicable to mohair and other animal fibers in staple form. The procedure is not recommended for individual fibers or groups of straightened fibers.

Standard Test Method of Sampling and Testing Staple Length of Grease Wool

ASTM D2968-13 利用显微投影法测定羊毛和其它动物纤维中的有髓纤维和死毛纤维的标准试验方法

5.1 Test Method D2968 for the determination of med and kemp fibers by microprojection may be used for the acceptance testing of commercial shipments of wool and other animal fibers, but caution is advised since only a few types of animal fibers have been subjected to interlaboratory tests to ascertain the precision of tests for med and kemp fibers by this test method. Comparative tests as directed in 5.1.1 may be advisable. 5.1.1 In case of a dispute arising from differences in reported test results when using Test Method D2968 for acceptance testing of commercial shipments, the purchaser and the supplier should conduct comparative tests to determine if there is a statistical bias between their laboratories. Competent statistical assistance is recommended for the investigation of bias. As a minimum, the two parties should take a group of test specimens which are as homogeneous as possible and which are from a lot of material of the type in question. The test specimens should then be randomly assigned in equal numbers to each laboratory for testing. The average results from the two laboratories should be compared using Student's t-test for unpaired data and an acceptable probability level chosen by the two parties before testing is begun. If a bias is found, either its cause must be found and corrected, or the purchaser and the supplier must agree to interpret future test results in view of the known bias. 5.2 Knowledge of the incidence of med fibers and kemp fibers in wool and other animal fibers is of importance to manufacturers of woven or knitted fabrics because of the apparent dye resistance and light reflectance qualities of these fibers. This is not to imply that all kemp fibers will resist dye and all med fibers will accept dye normally. In practice, a proportion of kemp fibers will appear normal after dyeing and a proportion of med fibers will appear chalky white after dyeing. From the perspective of visual and aesthetic problems, medullated fibers having an abnormally large diameter and a high degree of medullation are probably the worst kind. 1.1 This test method covers the determination by microprojection of the percentage of medullated fibers (med and kemp fibers) in wool or other animal fibers such as mohair, cashmere, alpaca, or camel's hair in their various forms. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Med and Kemp Fibers in Wool and Other Animal Fibers by Microprojection

ASTM D1575-13 洗净羊毛及生条中羊毛纤维长度的标准试验方法

5.1 This test method is not recommended for acceptance testing due to its poor between-laboratory precision. In some cases the purchaser and the seller may have to test a commercial shipment of one or more specific materials by the best available method even though the method has not been recommended for acceptance testing of commercial shipments. In such a case, if there is a disagreement arising from differences in values reported by the purchaser and the seller when using this method for acceptance testing, the statistical bias, if any, between the laboratory of the purchaser and the laboratory of the seller should be determined with each comparison being based on testing specimens randomly drawn from one sample of material of the type being tested. 5.2 A knowledge of the average length and length distribution of fibers is important to fiber processors. This method is useful for inplant control testing and for research purposes. 1.1 This test method covers the estimation of the average fiber length and length distribution of wool in nonparallel assemblies, such as scoured wool, and in card sliver. 1.2 This test method is applicable to many fibers other than wool if in the form of a nonparallel assembly or in a card sliver. 1.3 This test method is not applicable to unscoured wool or to wool top. 1.4 This test method specifically requires length in inches and mass in metric units, and is not contrary to ASTM policy. The values stated in inch-pound units are to be regarded as the standard. The information in parentheses is for information only. Note 1—The determination of staple length of grease wool is covered in Method D1234, Sampling and Testing Staple Length of Grease Wool,2 and the average length of fibers in wool top is covered in Test Method D519. 1.5 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Fiber Length of Wool in Scoured Wool and in Card Sliver