W91 纺织机械零部件 标准查询与下载
共找到 306 条与 纺织机械零部件 相关的标准，共 21 页
The document specifies dimensions and tolerances for bars for drop wires for electrical warp stop motions with continuous contact rail (form E1) or inner splitted contact rail (form E2).
Textile machinery and accessories - Bars for drop wires - Part 1: For electrical warp stop motions
- ICS
- 59.120.30
- CCS
- W91
- 发布
- 2002-08
- 实施
This part of ISO 8640 defines terms related to the following types of patterning device used on flat warp knitting machines: — lapping devices for warp ends; — patterning presser devices; — fall plate patterning devices; — yarn let-off and yarn tensioning patterning devices; — needle bar stopping devices; — weft insertion devices; — take-up patterning devices. NOTE 1 The figures in this part of ISO 8640 illustrate the working principles of the various aggregates. They do not represent the only, or even the most common, arrangements. In any case, to the extent technically possible, these devices are able to be combined. NOTE 2 In addition to terms and definitions used in two of the three official ISO languages (English and French), this part of ISO 8640 gives the equivalent terms and definitions in the German language; these are published under the responsibility of the member body for Germany (DIN). However, only the terms and definitions given in the official languages can be considered as ISO terms and definitions.
Textile machinery and accessories - Flat warp knitting machines - Vocabulary - Vocabulary of patterning devices
- ICS
- 01.040.59;59.120.40
- CCS
- W91
- 发布
- 2002-07-30
- 实施
- 2002-07-30
Specifies the main dimensions for ready-for-use top rollers (synthetic coverings).
Textile machinery and accessories - Spinning preparatory and spinning machinery - Main dimensions of coverings for top rollers
- ICS
- 59.120.10
- CCS
- W91
- 发布
- 2001-04-15
- 实施
- 2001-04-15
この規格は，一般衣料，身の回り品に用いる面ファスナ(以下，ファスナという。)について規定する。
Touch and close fastener
- ICS
- 59.080.30;61.040
- CCS
- W91
- 发布
- 2000-08-20
- 实施
This International Standard specifies the dimensions, characteristics and designations of steel pins recommended for spinning preparatory and spinning machinery.
Textile machinery and accessories - Steel pins for spinning preparatory and spinning machinery
- ICS
- 59.120.10
- CCS
- W91
- 发布
- 2000-03
- 实施
Rules for the inspection of blow room machines for export
- ICS
- CCS
- W91
- 发布
- 1999-12-01
- 实施
- 2000-05-01
This International Standard specifies the dimensions for hexagon nuts and slotted nuts for spindles used in spinning and twisting machines for textile yarns.
Textile machinery and accessories - Hexagon nuts and slotted nuts for spinning and twisting spindles
- ICS
- 59.120.10
- CCS
- W91
- 发布
- 1999-04
- 实施
本标准规定了纺机零件及成品的防锈材料与工艺规范。 本标准适用于纺机零件及成品的防锈。
Corrosion proof rule of material and technology for textile machinery parts and products
- ICS
- 59.120
- CCS
- W91
- 发布
- 1999-03-09
- 实施
- 1999-07-01
Textile machinery and accessories - Chain links for warp knitting machines - Vocabulary and symbols (ISO 11676:1994)
- ICS
- 01.040.59;59.120.40
- CCS
- W91
- 发布
- 1998-11
- 实施
本标准规定了前纺和细纱机械上罗拉包覆物— 胶管(以下简称“胶管”)的产品分类与命名、要求、试验方法、检验规则和包装、贮存。 本标准适用于邵尔A硬度60.90度的精梳、并条、粗纱、细纱机纺棉、化纤用胶管。
Spinning preparatory and spinning machinery.Covering of top rollers.Rubbercot
- ICS
- 59.120.10
- CCS
- W91
- 发布
- 1998-10-07
- 实施
- 1998-11-01
本标准规定了环锭细纱机和粗纱机用胶圈(以下简称“胶圈”)的产品分类与命名、要求、试验方法、检验规则和标志、包装、贮存。 本标准适用于环锭细纱机和粗纱机纺棉、化纤用胶圈。
Aprons for ring-spinning frames and speed frames
- ICS
- 59.120.10
- CCS
- W91
- 发布
- 1998-10-07
- 实施
- 1998-11-01
本标准规定r纺织用针的产品分类、技术要求、试验方法、检验规则等内容。 本标准适用于纺纱准备与纺纱机械及其他纺织机械用钢针。
Textile pin
- ICS
- 59.120.01
- CCS
- W91
- 发布
- 1998-10-07
- 实施
- 1998-11-01
本标准规定了纺织机械不锈钢设备的材料、成型加工、焊接飞表面处理及质量检验。 本标准适用于化纤、印染及其他纺织机械等不锈钢设备及构件。
Manufacturing standard of the stainless steel equipment
- ICS
- 59.120
- CCS
- W91
- 发布
- 1998-10-07
- 实施
- 1998-11-01
The document specifies the main dimensions and designation of heald-carrying rods for C- and J-shaped end loops of flat steel healds which are in accordance with ISO 11677-1 and ISO 11677-2 respectively.
Textile machinery and accessories - Main dimensions of open end loop flat steel healds and their corresponding heald-carrying rods - Part 3: Carrying rods for healds with C- and J-shaped end loops (ISO 11677-3:1995)
- ICS
- 59.120.30
- CCS
- W91
- 发布
- 1998-07
- 实施
本标准规定了针刺用针(以下简称刺针)的术语代号、产品分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于非织造布针刺机上使用的三角刺针，非织造布针刺机上使用的其他类型刺针亦可参照采用。
Felting needles
- ICS
- 59.120.01
- CCS
- W91
- 发布
- 1998-05-25
- 实施
- 1998-07-01
The document specifies the dimensions of guides for heald frames, which are used supplemental guidance of heald frames.#,,#
Textile machinery and accessories - Heald frames - Part 3: Guides for heald frames (ISO 10787-3:1994)
- ICS
- 59.120.30
- CCS
- W91
- 发布
- 1998-02
- 实施
本标准规定了织机附件的基本术语。主要包括开口装置、导经和打纬机件、撑幅装置、引纬装置、经纱断头检测装置五个部分的附件术语。
Textile machinery terminology.Accessories for weaving machines
- ICS
- 59.120
- CCS
- W91
- 发布
- 1998-01-20
- 实施
- 1998-02-01
本标准规定了纺织工业多臂装置用连续纹纸(下称纹纸)的尺寸。 本标准适用于多臂装置用连续纹纸。多臂装置及相关冲孔机的尺寸亦应参照使用。
Paper patterns for dobbies.Dimensions
- ICS
- CCS
- W91
- 发布
- 1998-01-20
- 实施
- 1998-02-01
本标准规定了不锈钢轧辊的主要参数、技术要求、试验方法、检验规则、包装、运输、贮存。 本标准适用于普通轧车用不锈钢轧辊。
Padder.Stainless steel bowl
- ICS
- 59.120.01
- CCS
- W91
- 发布
- 1998-01-20
- 实施
- 1998-02-01
本标准规定了多臂装置用纹板、纹钉的型式和主要尺寸。 本标准适用于多臂装置用纹板、纹钉。与多青装置纹板、纹钉相关的尺寸亦应参照使用。
Lags and pegs for dobbies.Dimensions
- ICS
- 59.120
- CCS
- W91
- 发布
- 1998-01-20
- 实施
- 1998-02-01
