共找到 210 条与 织部机械与器具 相关的标准,共 14 页
This part of ISO 11111 is intended to be used in conjunction with ISO 11111-1. It specifies significant hazards and corresponding safety requirements and/or measures for fabric manufacturing machinery. By taking into account the scope of ISO 11111-1 as far as is relevant, this part of ISO 11111 is applicable to all machinery, plant and related equipment intended to be used for weaving, knitting and tufting, as specified in Clause 5.
Textile machinery - Safety requirements - Fabric manufacturing machinery
To be read in conjunction with BS EN ISO 11111-1
Textile machinery - Safety requirements - Fabric manufacturing machinery
This International Standard specifies the principle of numbering of heald frames in al loom.
Textile machinery and accessories - Numbering of heald frames in a loom (ISO 5243:2004)
이 규격은 콘 및 치즈 권사기와 그 장치들에 대한 정의로 사용되는 기본 용어와 크로스
Textile machinery and accessories-Cone and cheese winding machines-Vocabulary
이 규격은 연사 목관에 대하여 규정한다.
Bobbin for twister
이 규격은 면에 사용하는 정경 목관에 대하여 규정한다.
Flange bobbin for warping(Cotton)
本标准规定了片梭织机的型式与规格、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于织造天然纤维(棉、毛、丝、麻)、化纤、玻璃纤维、金属丝、石棉纤维和混纺纱、丝、线织物的片梭织机。
Projectile weaving machine
本标准规定了储纬器的产品分类、技术要求、试验方法、检验规则、标志、使用说明、包装、运输和贮存。 本标准适用于各种类型储纬器。各类型储纬器的特殊要求及本标准未规定的其他要求应在各类型储纬器的产品标准中规定。
Weft accumulator
本标准规定了分条整经机的型式、主要技术参数、技术要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于棉、毛、麻、丝、化学纤维及混纺纱线整经用的分条整经机。
Sectional warping machine
この規格は,ジャカード用矢金の形状,寸法及び質量を規定する。
Lingoes for jacquard weaving
この規格は,ジャカード用ワイヤへルドの主要寸法について規定する。
Twin wire healds with inset mail for jacquard weaving
本标准规定了喷气织机用钢箱(以下简称钢箱)的术语、代号、主要技术参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于喷气织机用钢箱。
Reeds for air jet weaving machines
It shall be unlawful to interfere with, attempt to interfere with, conspire to interfere with, obstruct or restnct the mobility of or block the path of travel of any fire department emergency vehicle in any way, or to interfere with, attempt to interf
Dry Cleaning Plants
Textile machinery and accessories - Drop wires for warp stop motions for weaving machines without automatic drawing-in (ISO 441:1997)
Textile machinery and accessories - Drop wires for warp stop motions for weaving machines with automatic drawing-in (ISO 1150:1997)
本标准规定了进布装置的型式、基本参数、技术要求和试验方法。 本标准适用于在染整机械中,给平幅织物以适当的张力,使织物在正确位置平整地进人后单元的装置。
General specifition for feeding of material device
本标准规定了织物导向(对中)装置的型式、基本参数、技术要求和试验方法。 本标准适用于在染整机械中,以控制平幅织物纬向游动,使其沿给定位置保持居中运行的装置。
General specification for fabric guiding (centering) device
本标准规定了卷布装置的型式、基本参数、技术要求、试验方法。 本标准适用于在染整加工过程中,将织物卷绕成卷的装置。
General specification for batchers device
이 규격은 치즈 목관에 대하여 규정한다.
Cheese bobbins
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号