W98 纺织检测仪器 标准查询与下载

JJF(纺织) 051-2012 日晒气候色牢度试验仪校准规范

本规范适用于新制造、使用中和修理后的日晒气候色牢度试验仪(以下简称日晒仪)的校准。其他类似设备可参照本规范进行校准。

Calibration Specification for Light and Weather Fastness Testers

JJF(纺织) 049-2012 摆锤式植物撕裂仪校准规范

本规范规定了摆锤式织物撕裂仪(以下简称撕裂仪)的校准方法,适用于新制造、使用中和修理后的机械式和电子式及相类似的各种撕裂仪的校准。

Calibration Specification for Fabrics Tearing Tester

JJF(纺织) 029-2012 熨烫升华色牢度仪校准规范

本规范规定了熨烫升华色牢度仪的校准方法,适用于新制造、使用中和修理后熨烫升华色牢度仪(以下简称熨烫仪)的校准。其他原理相同、结构类似的仪器可参照本规范执行。

Calibration Specification for Scorch and Sublimation Tester

JJF(纺织) 036-2012 织物平磨仪校准规范

本规范适用于马丁代尔织物平磨仪(以下简称平磨仪)的计量性能校准,技术参数不同的同类仪器也可参照执行。

Calibration Specification for Fabric Flat-Rubbing Tester

JJF(纺织) 010-2012 纱线捻度仪校准规范

本规范适用于首次使用、修理后和使用中的纱线捻度仪及类似的纱线捻度仪(以下简称捻度仪)的校准。

Calibration Specification for Yarn Twist Tester

JJF(纺织) 034-2012 电容式条干仪计量检定标准器校准规范

本规范适用于新制造、使用中和修理后的YG132型、YG134型电容式条干仪计量检定标准器的校准,其他型号参照执行。

Calibration Specification for the Metrological Verification Standard of Textile Yarn Evenness Tester.Capacitance Method

JJF(纺织) 022-2012 纤维切断器校准规范

本规范规定了纤维切断器的校准方法,适用于新制造、使用中和修理后的用于测量纤维线密度的纤维切断器(以下简称切断器)的校准。

Calibration Specification for Fiber Cutter

JJF(纺织) 047-2012 电子式单纱强力机（仪）校准规范

本规范适用于电子式单纱强力机(仪)(以下简称强力机)及同类仪器的校准。

Calibration Specification for Electronic Single Yarn Strength Machines

KS K 6323-2011 纺织.外观三维.测量设备

이 표준은 3차원 측정장치를 사용하여 봉제물의 심퍼커링을 객관적으로 평가하는 방법에 대하여

Textiles－Test method for assessing the smoothness appearance of seams in fabrics using three-dimensional measuring apparatus

FZ/T 98010-2011 通风式纺织烘箱

本标准规定了通风式纺织烘箱的基本功能和参数、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于纺织材料（纺织品）含水率和回潮率测定用的强制通风式烘箱。本标准不适用于自然通风式烘箱。

Ventilated textile oven

FZ/T 98011-2011 原棉回潮率测定仪

本标准规定了原棉回潮率测定仪的基本功能和参数、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于电测器法检测细绒棉（锯齿棉、皮辊棉）和长绒棉回潮率的原棉回潮率测定仪。

Moisture regain tester for raw cotton

FZ/T 98007-2011 电子单纱强力仪

本标准规定了电子单纱强力仪的基本功能和参数、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于等速伸长检测法检测各种纱线强力的电子单纱强力仪。

Electronic strength tester for single yarn

FZ/T 98008-2011 电子织物强力仪

本标准规定了电子织物强力仪的基本功能和参数、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于CRE(等速伸长)检测法检测各种织物强力的电子织物强力仪。

Electronic strength tester for fabric

FZ/T 98009-2011 电子单纤维强力仪

本标准规定了电子单纤维强力仪的基本功能和参数、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于CRE(等速伸长)检测法检测各种纤维强力的电子单纤维强力仪。

Electronic strength tester for single fiber

ASTM D5252-11 六脚滚筒测试仪的标准操作规程

This equipment may be used to bring about the changes in appearance and texture on the surface of pile floor covering caused by mechanical action.1.1 This practice describes the equipment and operation of the hexapod tumble drum tester for testing pile floor covering to produce changes in appearance and color due to changes in surface structure by mechanical action tester. 1.2 This practice is applicable for use in testing unused pile floor covering of all types. It is not applicable for use in testing used pile yarn floor coverings. 1.3 This practice may be used by mutual agreement between the purchaser and supplier to set purchasing specifications. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This practice does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this practice to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for the Operation of the Hexapod Tumble Drum Tester

ASTM D76/D76M-11 纺织品拉伸试验用机械的标准规范

1.1 This specification covers the operating characteristics of three types of tensile testing machines used for the determination of the force-elongation properties of textile materials. These types of tensile testing machines are:1.1.1 Constant-rate-of-extension, CRE.1.1.2 Constant-rate-of-traverse, CRT.1.1.3 Constant-rate-of-loading (force), CRL.1.2 Specifications for tensile testing machines to measure other tensile-related properties of textile materials not covered by this standard are given in the ASTM standards using those machines.1.3 The values stated in SI units are to be regarded as standard; the values in inch-pound units are provided as information only and are not exact equivalents.1.4 The following safety hazards caveat pertains only to the test methods described in this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Tensile Testing Machines for Textiles

JJF(纺织) 028-2010 汗渍色牢度仪校准规范

本校准规范规定了汗渍色牢度仪的校准方法，适用于新制造、使用中和修理后的汗渍色牢度仪的校准。其他结构相同或类似的汗渍色牢度仪的校准可参照本规范执行。

Calibration Specification for Perspiration Fastness Instruments

JJF(纺织) 027-2010 染色摩擦色牢度仪校准规范

本规范规定了各型号染色摩擦色牢度仪的校准方法，适用于新制造、使用中和修理后各型号染色摩擦色牢度仪的校准。其他结构相同或类似的染色摩擦色牢度仪的校准可参照本规范执行。

Calibration specification for corlour fastness to friction testers

JJF(纺织) 061-2010 圆盘取样器校准规范

本规范规定了圆盘取样器的校准方法，适用于新制造、使用中和修理后的（ZB系列）圆盘取样器的校准。其他结构相同或类似的圆盘取样器的校准可参照本规范执行。

Calibration Specification for Circle Sample Cutters

JJF(纺织) 023-2010 往复移动式织物密度镜校准规范

本规范规定了往复移动式织物密度镜的校准方法。适用于新制造、使用中和修理后的往复移动式织物密度镜的校准。其他结构相同或类似的往复移动式织物密度镜的校准可参照本规范执行。

Calibration specification for traveling counting glasses