共找到 114 条与 人造革、合成革 相关的标准,共 8 页
This International Standard specifies a method for the preparation of a test sample of leather for chemical analysis. This method is applicable to all types of leather.
Leather - Chemical tests - Preparation of chemical test samples (ISO 4044:2008); German version EN ISO 4044:2008
This International Standard specifies a method for determining the pH value and the difference figure of an aqueous leather extract. It is applicable to all types of leather.
Leather - Chemical tests - Determination of pH (ISO 4045:2008);German version EN ISO 4045:2008
本标准规定了服装用聚氨酯合成革的分类、要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于以机织布基和针织布基为底基,经干、湿法聚氨酯涂层工艺制造的服装用聚氨酯合成革。
Polyurethane synthetic leather for clothing
本标准规定了聚氨酯束状超细纤维合成革的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于海岛型复合纤维非织造布经聚氨酯树脂湿法凝固、溶剂萃取以及后整理工艺制成的具有束状超细纤维结构的合成革。
Polyurethane fascicular micronbre synthetic leather
本标准规定了聚氨酯合成革的分类、要求、试验方法、检验规则及标志标志、包装、运输、贮存。 本标准适用于针刺非织造布经聚氨酯树脂湿法加工、溶剂萃取以及系列后整理工艺制成的具有中空藕状纤维结构的聚氨酯合成革。
Polyurethane synthetic leather
The test specified in this standard serves to assess the behaviour of products as in DIN 16922 when subjected to repetitive flexing (flex cracking behaviour). The test specimens may be of type A or type B (see clause 4), although results obtained for the two types are not comparable. Whether type A or type B test specimens are to be tested and at what temperature shall be subject to agreement.
Testing of artificial leather and similar sheet materials - Flex cracking test
本标准规定了鞋面用聚氯乙烯人造革的分类、要求、试验方法、检验规则、标志和包装、运输、贮存。 本标准适用于非织造布、机织布和针织布为底基,以聚氯乙烯树脂为主要原料,加入增塑剂和其他添加剂经压延或涂覆等工艺方法而制成的鞋面用聚氯乙烯人造革。
Polyvinyl chloride artificial leather for shoe upper
本标准规定了鞋面用聚氨酯人造革的分类、要求、试验方法、检验规则、标志和包装、运输、贮存。 本标准适用于非织造布、机织布和针织布为底基,以聚氨酯树脂为主要材料,经浸渍或涂敷、湿法凝固等工艺制成,再经干法离型纸贴面或其他后处理加工而成的鞋面用聚氨酯人造革。
Polyurethane artificial leather for shoe upper
Covers constructional and performance requirements for fixed and swivel type castors that have wheel diameters in the range 50 mm to 250 mm and are intended for use on wheeled hospital equipment.
Castors for hospital equipment
This standard specify a test method for judging the behaviour at permanent folding of artificial leather and similar sheet materials according to DIN 16922. The method is only suitable for products which can be fitted into the test apparatus without force and for such products, where the fold of the test specimen runs up and down during the test.#,,#
Testing of artificial leather and similar shut materials - Behaviour at permanent folding (Flexometer-method)
Testing of artificial leather and similar sheet materials; tear growth test
Testing of artificial leather and similar sheet materials; tear growth test
Testing artificial leather and similar sheet materials; determination of the total elongation (statical elongation) and irreversible elongation
Testing of artificial leather; tensile test
Testing of artificial leather; tensile test
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号