Y77 帽、手套、袜子 标准查询与下载

NAVY MIL-DTL-32147-2004 飞行员反曝光加固袜子

This specification covers the requirements for one type of flyers’ ruggedized anti-exposure socks.

SOCKS, FLYERS' , ANTI-EXPOSURE, RUGGEDIZED

KS M ISO 20876:2002 鞋靴.外底试验方法.耐缝合处撕裂性

Footwear--Test methods for insoles--Resistance to stitch tear

ISO 20869:2001 鞋类 外底、内底、鞋衬和内垫试验方法 溶水量

This draft standard specifies a method for the determination of the water soluble contents for outsoles, insoles, lining and insocks.

Footwear - Test methods for outsoles, insoles, lining and insocks - Water soluble content

ISO 20873:2001 鞋类 外底试验方法 尺寸稳定性

This standard specifies a method for determining the linear shrinkage after heating of test specimens prepared from outsoles.

Footwear - Test methods for outsoles - Dimensional stability

ISO 20874:2001 鞋类 外底试验方法 针孔撕裂强度

This European Standard specifies a method for the determination of the needle tear strength for outsoles, irrespective of the material.

Footwear - Test methods for outsoles - Needle tear strength

ISO 20875:2001 鞋类 外底试验方法 耐撕裂强度和耐脱层性的测定

This European standard specifies a method for the determination of the split tear strength and delamination resistance for outsoles.

Footwear - Test methods for outsoles - Determination of split tear strength and delamination resistance

ISO 20876:2001 鞋类 内底试验方法 耐缝合处撕裂

This European standard describes a method for evaluating the ability of an insole, irrespective of the material, to hold stitches, or to take clenched metal fastenings. The method has become accepted as a general quality criterion for insole materials even where attachment is by means of adhesives.

Footwear - Test methods for outsoles - Resistance to stitch tear

ISO 20868:2001 鞋类 内底试验方法 耐磨损性

This draft standard specifies a test method to determine the abrasion resistance of insoles, irrespective of the material.

Footwear - Test methods for insoles - Abrasion resistance

ISO 20866:2001 鞋类 内底试验方法 耐脱层性

This draft standard specifies a test method for the determination of the delamination resistance of insoles, irrespective of the material.

Footwear - Test methods for insoles - Delamination resistance

ISO 20867:2001 鞋类 内底试验方法 跟钉抓紧强度

This draft standard specifies a method to determine the ability of an insole component to hold a heel pin and to prevent its head from being pulled through the insole component. The method is applicable to insoles used in the seat of footwear with inside attached heels, and also to seat components where outside heel attachments are used and the heel pin is clenched.

Footwear - Test methods for insoles - Heel pin holding strength

ISO 20877:2001 鞋类 成鞋试验方法 保暖性

本标准规定了成鞋防寒性能的试验方法。 本标准适用于所有的鞋子或靴子的防寒性能试验。

Footwear - Test methods for whole shoe - Thermal insulation

ISO 18454:2001 鞋类 鞋和鞋部件的调气和试验的标准大气环境

This European Standard specifies out the general conditioning and testing atmospheres for the evaluation of footwear and footwear component properties. This European Standard defines two standard atmospheres for conditioning and testing of footwear and footwear components.

Footwear - Standard atmospheres for conditioning and testing of footwear and components for footwear

DIN EN 13073:2001 鞋靴.整鞋试验方法.耐水性

Footwear - Test methods for whole shoe - Water resistance; German version EN 13073:2001

DLA A-A-59593-2000 极端天气保暖短袜[取代:DLA MIL-S-38004 C CANC NOTICE 1,DLA MIL-S-38004 C,DLA MIL-S-38004 B,DLA MIL-S-38004 A(1),DLA MIL-S-38004 A]

This commercial item description covers one type of felt socks intended for wear with the extreme cold weather boot by personnel of the Department of Defense.

SOCKS, EXTREME COLD WEATHER [Superseded: DLA MIL-S-38004 C CANC NOTICE 1, DLA MIL-S-38004 C, DLA MIL-S-38004 B, DLA MIL-S-38004 A (1), DLA MIL-S-38004 A]

ASTM F939-99 高山滑雪板绑带的松开扭矩值的选择

1.1 This practice provides information for the selection of release torque values for Alpine ski bindings. It gives information necessary for determining release torque values for an individual to be used by ski binding manufacturers in their instructions for installation and use and by ski shops for the adjustment of already mounted ski bindings. 1.2 This practice is applicable to releasable Alpine ski-boot-binding systems. 1.3 Release torque values selected using this practice may not be appropriate for circumstances in which: 1.3.1 The skier carries an object that significantly increases the skier's effective body weight, 1.3.2 The skier grasps or in some manner controls an object such as a sled, and 1.3.3 The skier encounters exceptional snow or terrain conditions not commonly found within ski area boundaries. 1.4 This practice may be inappropriate for nonmechanical bindings or bindings used with boots that reach more than half way up the lower leg. 1.5 Release torque values outside the recommendations of this practice may increase the risk of injury to the skier. However, skiers who are informed of this potential risk may request such settings and have them provided, subject to any guidelines and limitations specified by the binding manufacturer. 1.6 These values refer to recommended release torque for initial adjustment of a ski binding and subsequent readjustment of the binding during routine maintenance or following a suspected malfunction but are not intended to apply to the condition of the equipment at any time after it is put into use. 1.6.1 For information concerning applicable tolerances to be used for the adjustment and inspection of releasable Alpine ski bindings in retail operations consult Practice F1063; for rental applications consult Practices F1064 and F1065. 1.7 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Selection of Release Torque Values for Alpine Ski Bindings

DLA A-A-50015 C-1996 伸缩式袜子(有装饰或衬里)

This commercial item description covers the requirements for stretch type, ribbed knit, cotton/nylon, and polyester socks.liner in a sock system by personnel of the Department of Defense.

SOCKS, STRETCH TYPE (DRESS OR LINER)

BS EN 511:1994 御寒手套规范

This standard defines the requirements and test methods for gloves which protect against convective or conductive cold down to -50 ℃. This cold can be linked to the climatic conditions or an industrial activity. The specific values of the different performance levels are decided by the special requirements for each class of risk or the special areas of application. Product tests can only be carried out for performance levels and not for levels of protection.

Specification for protective gloves against cold

BS 7672:1993 抗栓塞袜类的压缩、硬挺度和标记规范

This British Standard specifies requirements for, and describes Methods of test for, the compression and stiffness of anti-embolism hosiery. It also specifies labelling requirements.

Specification for compression, stiffness and labelling of anti-embolism hosiery

CGSB 38.21-93-CAN/CGSB-1993 公园管理员戴毡帽 代替38-GP-21M

Park Warden Felt Hat

Park Warden Felt Hat

QB/T 1616-1992 运动手套

本标准规定了运动手套的产品分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于日常运动手套。

Sport gloves