共找到 678 条与 家具综合 相关的标准,共 46 页
UL Standard for Safety Furniture Power Distribution Units (Third Edition; Reprint with revisions through and including September 8, 2015)
This European Standard specifies a test method to assess the ignitability of material combinations, such as covers and fillings used in upholstered seating, when subjected to a small flame as an ignition source. The test measures only the ignitability of a combination of materials used in upholstered seating and not the ignitability of a particular finished item of furniture incorporating these materials.
Furniture - Assessment of the ignitability of upholstered furniture - Part 2: Ignition source match flame equivalent
This European Standard specifies a test method to assess the ignitability of material combinations, such as covers and fillings used in upholstered seating, when subjected to a smouldering cigarette as an ignition source. The test measures only the ignitability of a combination of materials used in upholstered seating and not the ignitability of a particular finished item of furniture incorporating these materials.
Furniture - Assessment of the ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette
本标准规定了家具制造过程中自动封边机的术语和定义、一般要求、作业场所与环境要求、加工操作要求、机床维护保养要求、物料搬运要求和防护用品使用要求。本标准适用于家具制造中所使用的自动封边机(以下简称“封边机”)。其他半自动封边机和手动封边机可参照执行。
Safety specification for furniture manufacturing.Operation requirements of automatic edge bander
Child use and care articles - Chair mounted seat; German version EN 16120:2012+A1:2014
本标准规定了常用办公家具产品中办公桌、办公椅和文件柜的一般人类工效学要求。本标准适用于一般办公场所使用的办公桌、办公椅和文件柜产品。
Ergonomics requirements for office furniture
This European Standard specifies the connecting dimensions of pedestal and wall-hung bidets with over-rim supply (further on: bidets) in accordance with EN 14528 regardless of materials used for their manufacture. NOTE 1 Other connecting dimensions are permitted, e. g. special designs of bidets, if the manufacturer supplies or recommends the appropriate fitting. NOTE 2 The shape of the appliance in the figures is for illustration only; it in no way prejudices the final shape of the appliance, which is left to the initiative of the manufacturer.
Pedestal and wall-hung bidets with over-rim supply - Connecting dimensions
This European Standard specifies the requirements for classification of all textile floor coverings and carpet tiles, excluding rugs and runners (see ISO 2424) into use classes with regard to one or more of the following properties: wear, appearance retention, additional performance properties and classes for luxury rating. This European Standard refers to the classification as defined in EN ISO 10874.
Textile floor coverings - Classification (Incorporates Amendment A1: 2016)
Furniture. Assessment of the surface resistance to microscratching
Furniture - Strength, durability and safety - Requirements for non-domestic seating; German version EN 16139:2013 + AC:2013
Furniture - Assessment of surface resistance to dry heat; German version EN 12722:2009+A1:2013
Furniture - Assessment of surface resistance to wet heat; German version EN 12721:2009+A1:2013
Furniture - Assessment of surface resistance to cold liquids; German version EN 12720:2009+A1:2013
5.1 This test method is used to determine the time to sustained flaming and heat release of materials and composites exposed to a prescribed initial test heat flux in the cone calorimeter apparatus. 5.2 Quantitative heat release measurements provide information that can be used for upholstery and mattress product designs and product development. 5.3 Heat release measurements provide useful information for product development by yielding a quantitative measure of specific changes in fire performance caused by component and composite modifications. Heat release data from this test method will not be predictive of product behavior if the product does not spread flame over its surface under the fire exposure conditions of interest. 5.4 Test Limitations—The test data are invalid if either of the following conditions occur: (1) explosive spalling; or (2) the specimen swells sufficiently prior to ignition to touch the spark plug, or the specimen swells up to the plane of the heater base during combustion. 1.1 This fire-test-response test method can be used to determine the ignitability and heat release from the composites of contract, institutional, or high-risk occupancy upholstered furniture or mattresses using a bench scale oxygen consumption calorimeter. 1.2 This test method provides for measurement of the time to sustained flaming, heat release rate, peak and total heat release, and effective heat of combustion at a constant initial test heat flux of 35 kW/m2. This test method is also suitable to obtain heat release data at different heating fluxes. The specimen is oriented horizontally, and a spark ignition source is used. 1.3 The times to sustained flaming, heat release, and effective heat of combustion are determined using the apparatus and procedures described in Test Method E1354. 1.4 The tests are performed on bench-scale specimens combining the furniture or mattress outer layer components. Frame elements are not included. 1.5 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.6 This standard is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessment of the materials, products, or assemblies under actual fire conditions. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements, see Section 6. 1.8 Fire testing is inherently hazardous. Adequate safeguards for personnel and property shall be employed in conducting these tests.
Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter
Non-domestic storage furniture. Requirements for safety, strength, durability and stability
This European Standard specifies requirements for the safety, strength, durability and stability for all types of non-domestic storage furniture. It does not apply to domestic storage, office storage, industrial storage, kitchen, catering equipment, retail storage, laboratory storage and industrial storage lockers. Requirements for strength and durability do not apply to the structure of the building for example the strength of wall hanging cabinets includes only the cabinets and the parts used for attachment. The wall and the wall attachments are not included. It does not include requirements for the resistance to ageing, degradation and flammability.
Non-domestic storage furniture - Requirements for safety, strength, durability and stability
Ladders. Mobile ladders with platform
This British Standard specifies requirements and test methods for chairs with support surfaces the position of which can be adjusted electrically by the seated person and/or a responsible person, including riser chairs, recliner chairs and rise and recline chairs. It specifies chairs suitable for adult users weighing up to 110 kg and up to 160 kg, with a normal body mass distribution. The standard is applicable to single and multiple seating units.
Furniture. Chairs with electrically operated support surfaces. Requirements
本标准规定了木家具的极限与配合的术语和定义,基本规定,标准公差与基本偏差,孔、轴公差带与配合,未注公差尺寸的极限偏差。本标准适用于木家具和其他家具木制件的表面或结构的尺寸公差,以及由他们组成的配合,其他木制品和木制件可参照执行。
Wooden furniture.Limit and fit
本标准规定了用力学试验机测定家具表面硬质覆面材料与基材间剥离强度的方法。本标准适用于以硬质覆面材料饰面的家具及其他木制品的零部件表面剥离强度试验。
Determination of peel strength of rigid overlaid materials in furniture surface
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号