Z29 流动污染源分析方法 标准查询与下载

ASTM D6522-00(2005) 用便携式分析仪测定燃天然气的往复式发动机、燃气轮机、燃烧炉和工艺加热器排放的氧化氮、一氧化碳和氧浓度的标准试验方法

The results of this test method may be used to determine nitrogen oxides and carbon monoxide emissions from natural gas combustion. This test method may also be used to monitor emissions to optimize process operation for nitrogen oxides and carbon monoxide control.1.1 This test method covers the determination of nitrogen oxides (NO and NO2), carbon monoxide (CO), and oxygen (O2) concentrations in controlled and uncontrolled emissions from natural gas-fired reciprocating engines, combustion turbines, boilers, and process heaters. Due to the inherent cross sensitivities of the electrochemical cells, this test method should not be applied to other pollutants or emission sources without a complete investigation of possible analytical interferences and a comparative evaluation with EPA test methods.1.1.1 The procedures and specifications of this method were developed during laboratory and field tests funded by the Gas Research Institute (GRI). Comparative emission tests were conducted only on natural gas-fired combustion sources.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers

ASTM D6522-00 用便携式分析仪测定燃天然气的往复式发动机、燃气轮机、燃烧炉和工艺加热器排放的氧化氮、一氧化碳和氧浓度的标准试验方法

1.1 This test method covers the determination of nitrogen oxides (NO and NO2), carbon monoxide (CO), and oxygen (O2) concentrations in controlled and uncontrolled emissions from natural gas-fired reciprocating engines, combustion turbines, boilers, and process heaters. Due to the inherent cross sensitivities of the electrochemical cells, this test method should not be applied to other pollutants or emission sources without a complete investigation of possible analytical interferences and a comparative evaluation with EPA test methods.1.1.1 The procedures and specifications of this method were developed during laboratory and field tests funded by the Gas Research Institute (GRI). Comparative emission tests were conducted only on natural gas-fired combustion sources.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers

JT/T 409-1999 船舶机舱舱底水、生活污水采样方法

本标准规定了直接采集船舶机舱舱底水样品的采样方法，以及船用舱底油污水分离装置处理后排放水的采样方法，适用各类船舶。 本标准规定了船用生活污水处理装置排放水的采样方法，以及从生活污水贮存柜中采集生活污水样品的方法，适用于各类安装有船用生活污水处理装置及生活污水贮存柜的船舶。

Sampling methods of bilge in machinery space and sewage from ships

JIS D 1030:1995 汽车排气中一氧化碳、二氧化碳和碳氢化合物浓度的连续测定分析方法

Analytical procedure for continuous measurement of carbon monoxide, carbon dioxide and hydrocarbon in automobile exhaust gas

JIS D 8301:1993 声学.道路车辆噪声测量用试验车道规范

この規格の目的は，車両の車外騒音測定において，試験路面の材料，設計及び施工を詳細に規定することによって，試験場所間の差異を最小にすることである。

Acoustics -- Specification of test tracks for the purpose of measuring noise emitted by road vehicles

JT 2011-1991 船舶油污染事故等级标准

本标准规定了船舶油污染事故等级的划分，作为各交通部门管理和统计船舶油污染事故的评定依据。 本标准适用于由油船和非油船所造成的水域油污染事故。但不适用于由各种原因引起的海损事故所造成的油污染事故。

Grade Standards for Ship Oil Pollution Accidents