Z70 有毒害固体废弃物控制标准 标准查询与下载
共找到 145 条与 有毒害固体废弃物控制标准 相关的标准，共 10 页
For the procedure in §98.193(b)(1), a complete record of all measured parameters used in the GHG emissions calculations is required (e.g., oxide content, quantity of lime products, etc.).
Protection of environment. Part98:Mandatory greenhouse gas reporting. Subpart S:Lime manufacturing. Section98.195:Procedures for estimating missing data.
- ICS
- CCS
- Z70
- 发布
- 2013-11-29
- 实施
- 2013-11-29
In addition to the information required by §98.3(c), each annual report must contain the information specified in paragraphs (a) or (b) of this section, as applicable.
Protection of environment. Part98:Mandatory greenhouse gas reporting. Subpart S:Lime manufacturing. Section98.196:Data reporting requirements
- ICS
- CCS
- Z70
- 发布
- 2013-11-29
- 实施
- 2013-11-29
(a) You must report N2O process emissions from each nitric acid train as required by this subpart.
Protection of environment. Part98:Mandatory greenhouse gas reporting. Subpart V:Nitric acid production. Section98.222:GHGs to report.
- ICS
- CCS
- Z70
- 发布
- 2013-11-29
- 实施
- 2013-11-29
(a) You must determine annual N2O process emissions from each nitric acid train according to paragraphs (a)(1) or (a)(2) of this section.
Protection of environment. Part98:Mandatory greenhouse gas reporting. Subpart V:Nitric acid production. Section98.223:Calculating GHG emissions.
- ICS
- CCS
- Z70
- 发布
- 2013-11-29
- 实施
- 2013-11-29
(a) You must determine annual N2O emissions from adipic acid production according to paragraphs (a)(1) or (2) of this section.
Protection of environment. Part98:Mandatory greenhouse gas reporting. Subpart E:Adipic acid production. Section98.53:Calculating GHG emissions.
- ICS
- CCS
- Z70
- 发布
- 2013-11-29
- 实施
- 2013-11-29
The GHG emissions data for petroleum and natural gas emissions sources must be quality assured as applicable as specified in this section. Offshore petroleum and natural gas production facilities shall adhere to the monitoring and QA/QC requirements as set forth in 30 CFR 250.
Protection of environment. Part98:Mandatory greenhouse gas reporting. Subpart W:Petroleum and natural gas systems. Section98.234:Monitoring and QA/QC requirements.
- ICS
- CCS
- Z70
- 发布
- 2013-05-01
- 实施
- 2013-05-01
Technical Specifications for Sludge Land Utilization
- ICS
- 13.030.20
- CCS
- Z70
- 发布
- 2013-04-19
- 实施
- 2013-05-19
本标准规定了危险废物收集、贮存、运输过程所应遵守的技术要求。本标准适用于危险废物产生单位及经营单位的危险废物的收集、贮存和运输活动。
Technical specifications for collection, storage, transportation of hazardous waste
- ICS
- 01.040.13
- CCS
- Z70
- 发布
- 2012-12-24
- 实施
- 2013-03-01
Packaging for medicinal care waste - Boxes and small collectors for perforating waste - Specifications and tests.
- ICS
- 13.030.30
- CCS
- Z70
- 发布
- 2011-12-01
- 实施
- 2011-12-02
La présente Norme européenne spécifie des méthodes permettant de déterminer le potentiel des matériaux sulfurés à former des eaux de drainage acides. Les méthodes spécifiées permettent de déterminer à la fois le potentiel de génération d'acide (AP) et le potentiel de neutralisation (NP) du matériau. A partir de ces résultats, le potentiel de neutralisation net (NNP) et le rapport de potentiel de neutralisation (NPR) sont calculés.La présente Norme européenne est applicable à tous les déchets sulfurés de l'industrie extractive, à l'exclusion des déchets qui auront un pH inférieur à 2 lors de l'étape initiale du mode opératoire décrit en 8.2.3.
Characterization of waste - Static test for determination of acid potential and neutralisation potential of sulfidic waste.
- ICS
- 13.030.10
- CCS
- Z70
- 发布
- 2011-12-01
- 实施
- 2011-12-23
Explosiveness Inspection Procedures for Imported Solid Waste Raw Materials
- ICS
- 13.030.10
- CCS
- Z70
- 发布
- 2011-05-31
- 实施
- 2011-12-01
Technical Guidelines for On-line Detection Level Design of Energy Conservation and Emission Reduction
- ICS
- 35.020
- CCS
- Z70
- 发布
- 2011-02-15
- 实施
- 2011-04-01
You must calculate and report the annual process CO2 emissions from each ammonia manufacturing process unit using the procedures in either paragraph (a) or (b) of this section.
Protection of environment. Part98:Mandatory greenhouse gas reporting. Subpart G:Ammonia manufacturing. Section98.73:Calculating GHG emissions.
- ICS
- CCS
- Z70
- 发布
- 2010-12-17
- 实施
- 2010-12-17
Packaging for medicinal care waste - Boxes and small collectors for perforating waste - Specifications and tests.
- ICS
- 13.030.30
- CCS
- Z70
- 发布
- 2009-04-01
- 实施
- 2009-04-25
本标准规定了危险废物焚烧设施大气污染物排放标准限值及污染控制技术要求。 本标准适用于以焚烧方式处理危险废物的现有设施的大气污染控制，以及新建、改建、扩建项目的设计、环境影响评价、竣工验收以及建成后的污染控制。
Air Pollutant Emission Standards for Hazardous Waste Incineration
- ICS
- 13.030.10
- CCS
- Z70
- 发布
- 2008/01/01
- 实施
- 2008/01/01
本标准规定了废塑料回收、贮存、运输、预处理、再生利用等过程的污染控制和环境保护监督管理的要求。 本标准适用于包括进口废塑料在内的各种废塑料的回收与再生利用，不适用于属于医疗废物和危险废物的废塑料。
Technical specifications for pollution control during collection and recycle of waste plastics (on trial)
- ICS
- 13.030.10
- CCS
- Z70
- 发布
- 2007-09-30
- 实施
- 2007-12-01
本标准规定了清洁生产的一般要求。本标准将清洁生产标准分成六类，即生产工艺与装备要求、资源能源利用指标、产品指标、污染物产生指标（末端处理前）、废物回收利用指标和环境管理要求。 本标准适用于电解锰生产企业的清洁生产审核与清洁生产潜力与机会的判断，以及清洁生产绩效评定和清洁生产绩效公告制度。
Cleaner production standard -Manganese electrolytic industry
- ICS
- 13.030.01
- CCS
- Z70
- 发布
- 2007-08-01
- 实施
- 2007-10-01
This document specifies a test method for determining the influence of pH on the leachability of inorganic constituents from a waste material. The equilibrium condition as defined in the document is established by continually adjusting the pH by the addition of acid or base to reach desired pH values. This test method produces eluates, which are subsequently characterized physically and chemically.#,,#
Characterization of waste - Leaching behaviour tests - Influence of pH on leaching with continuous pH-control; German version CEN/TS 14997:2006
- ICS
- 13.030.01
- CCS
- Z70
- 发布
- 2007-02
- 实施
This Technical Specification is applicable to determine the acid and/or base neutralization capacity of a material.
Characterization of waste - Leaching behaviour tests - Acid and base neutralisation capacity test; German version CEN/TS 15364:2006
- ICS
- 13.030.01
- CCS
- Z70
- 发布
- 2006-07
- 实施
This European Standard specifies the procedural steps to be taken in the preparation and application of a Sampling Plan. The Sampling Plan describes the method of collection of the laboratory sample necessary for meeting the objective of the testing programme. The principles or basic rules outlined in this European Standard, provide a framework that can be used by the project manager to: -- produce standardised Sampling Plans for use in regular or routine circumstances (elaboration of daughter/derived standards dedicated to well defined sampling scenarios); -- incorporate the specific sampling requirements of European and national legislation; -- design and develop a Sampling Plan for use on a case by case basis. This European Standard has been developed for the characterization of waste. There may be a need for more than one Sampling Plan to meet all the requirements of the testing programme. Ultimately the Sampling Plan provides the sampler with detailed instructions on how sampling should be carried out. NOTE Although this European Standard in most cases refers to the taking of one sample or increment or the preparation of one laboratory sample, it should be noted that often this should be more than one. For simplicity reasons this European Standard uses singular terms, while plural terms are also possible or even likely.
Characterization of waste - Sampling of waste materials - Framework for the preparation and application of a sampling plan; English version of DIN EN 14899:2006-04
- ICS
- 13.030.01
- CCS
- Z70
- 发布
- 2006-04
- 实施
