T08 标志、包装、运输、贮存 标准查询与下载
共找到 48 条与 标志、包装、运输、贮存 相关的标准，共 4 页
Light vehicle energy consumption labeling Part 1: Gasoline and diesel vehicles
- ICS
- 43.020
- CCS
- T08
- 发布
- 2023-09-08
- 实施
- 2024-07-01
Light vehicle energy consumption labeling Part 2: Externally rechargeable hybrid electric vehicles and pure electric vehicles
- ICS
- 43.020
- CCS
- T08
- 发布
- 2023-09-08
- 实施
- 2024-07-01
本文件规定了车用动力电池回收利用中梯次利用产品标识的标识构成、标志要求、标示位置、标示方式以及标示要求。 本文件适用于对退役车用动力蓄电池的梯次利用产品进行标识。
Recovery of traction battery used in electric vehicle—Echelon use—Part 4: Labels for echelon used battery products
- ICS
- 43.020
- CCS
- T08
- 发布
- 2021-08-20
- 实施
- 2022-03-01 00:00:00.0
本标准规定了汽车零部件再制造产品标识的术语和定义、标识要求、标示位置、标示方式与标示要求。本标准适用于汽车零部件再制造产品,其他机动车辆零部件再制造产品可参照执行。
Remanufactured automotive components—Specifications of labels
- ICS
- 13.030.50
- CCS
- T08
- 发布
- 2021-03-09
- 实施
- 2021-10-01 00:00:00.0
Electric vehicles—Symbols for controls, indicators and tell-tales
- ICS
- 43.020
- CCS
- T08
- 发布
- 2017-09-29
- 实施
- 2019-07-01 00:00:00.0
GB22757 的本部分规定了轻型汽车能源消耗量标识的内容、.格式.材质和粘贴要求。 本部分仅适用于最大设计总质量不超过3 500 kg 的MI、Ms 类和Ni 类的可外接充电式混合动力电动汽车和纯电动汽车。
Energy consumption label for light-duty vehicles—Part 2: For off-vehicle-chargeable hybrid electric vehicles and pure electric vehicles
- ICS
- 43.020
- CCS
- T08
- 发布
- 2017-05-12
- 实施
- 2018-01-01 00:00:00.0
Energy consumption label for light-duty vehicles—Part 1: For gasoline and diesel vehicles
- ICS
- 43.020
- CCS
- T08
- 发布
- 2017-05-12
- 实施
- 2018-01-01 00:00:00.0
本标准规定了采用标准的基准试验轮胎或试验车辆的轮胎来测定铺装路面特征纵向摩氛力值的试验方法;规定了在技术试验路面上测定峰值和滑移制动力系数的一般试验规程以及如何确定试验的有效性,其中路面条件由使用者在试验时确定和控制;还规定了试验和试验路面条件的文件编写程序及细节。 本标准的目的是对在不同试验跑道上进行的试验结果进行协调。 采用标准的基准试验轮胎CSRTT)测得的数据将作为表征乘用车轮胎在试验跑道和路面上行驶时路面摩擦特性的标准基准值。 某些方法也适用于测定试验车辆轮胎在试验跑道上的摩擦特性。 该数值表示试验时的峰值.近峰值或滑移制动力系数,不一定是固定值。 采用基准轮胎测定的值可作为表征试验跑道和路面某些摩擦特性的基准值。 本标准无意强调与其使用相关的所有安全问题。 使用者有义务在使用本标准前了解、制定合适的安全和健康操作规范并确定法规的适用范围。 注1:摩擦特性受环境条件、使用.路龄和路面污染等很多可变因素的影响。 这些条件中的任何一项发生明显变化都会改变测量值。 注2:采用本方法规定的试验规程所测得的制动力系数值并不一定与采用其他路面系数测定方法所获取的值相一致或直接相关。
Road vehicle.Measurement of roadsurface friction
- ICS
- 43.020
- CCS
- T08
- 发布
- 2011-09-29
- 实施
- 2012-03-01
本标准规定了汽车燃料消耗量标识的内容、格式、材质和粘贴的要求。 本标准适用于能够燃用汽油或柴油燃料的、最大设计总质量不超过3500kg的M、M和N类车辆，不适用于混合动力电动汽车及可燃用其他单燃料的车辆。
Fuel consumption label for light vehicle
- ICS
- 43.020
- CCS
- T08
- 发布
- 2008-12-31
- 实施
- 2009-07-01
本标准规定了电动汽车（定义见GB/T 19596-2004）特有的关于操纵件、指示器及信号装置的识别标志和信号装置显示颜色的基本要求。 本标准适用于电动汽车。
Electric vehicles-Symbols for control,indicators,and tell-tales
- ICS
- 43.020
- CCS
- T08
- 发布
- 2005-07-13
- 实施
- 2006-02-01
本标准规定了汽车操纵件、指示器及信号装置的标志及其位置和信号装置显示颜色的基本要求。本标准适用于M、N类汽车。
Motor vehicles--symbols for controls,indicators and tell-tales
- ICS
- 43.020
- CCS
- T08
- 发布
- 1999-09-17
- 实施
- 2000-07-01
本标准规定了压缩天然气汽车、液化天然气汽车、吸附天然气汽车和液化石油气汽车的识别标志。 本标准适用于可燃用压缩天然气、液化天然气、吸附天然气和液化石油气的各种类型的汽车。
Natural gas vehicle and liquefied petroleum gas vehicle Identification marks
- ICS
- 43.020
- CCS
- T08
- 发布
- 1999-02-14
- 实施
- 2000-01-01
Management Regulations on the Use of Official Vehicles
- ICS
- 01.040.03
- CCS
- T08
- 发布
- 2022-08-16
- 实施
- 2022-09-16
Road vehicles--Instructions for the implementation of the assignment of world manufacturer identifier(WMI) codes forvehicle identification number(VIN) systems and for world partsmanufacturer identifier(WPMI) codes
- ICS
- 43.020
- CCS
- T08
- 发布
- 2015-10-08
- 实施
Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 3 : vehicle data.
- ICS
- 35.240.60;43.020
- CCS
- T08
- 发布
- 2012-08-01
- 实施
- 2012-08-11
This SAE Recommended Practice describes the basic content requirements, bar code specifications, and functional test specifications of the vehicle identification number (VIN) label. On the vehicle, the VIN label is to be mounted in a readily accessible location for use of a bar-code scanning device. This document specifies a permanent label for the standard vehicle identification number that can be automatically identified through a bar-coded format.
Recommended Practice for Bar-Coded Vehicle Identification number Label
- ICS
- 43.020
- CCS
- T08
- 发布
- 2012-07-24
- 实施
This SAE Recommended Practice establishes procedure for the issuance and assignment of a World Manufacturer Identifier (WMI) on a uniform basis to vehicle manufacturers who may desire to incorporate it in their vehicle Identification Numbers (VIN). This recommended practice is intended to be used in conjunction with the recommendations for VIN systems described in SAE J853, J187, J272 and other SAE reports for VIN systems. These procedures were developed to assist in identifying the vehicle as to its point of origin. It was felt that review and coordination of the WMI by a single organization would avoid duplication of manufacturer identifiers and assist in the identification of vehicles by agencies such as those concerned with motor vehicle titling and registration, law enforcement, and theft recovery.
World Manufacturer Identifier
- ICS
- 43.020
- CCS
- T08
- 发布
- 2012-07-24
- 实施
This SAE standard applies to refrigerant identification equipment to be used for identifying an acceptable level of R-1234yf purity in a refrigerant tank or vehicle MAC system labeled as containing R-1234yf, and not misidentify other refrigerants. The purpose of this SAE Standard is to establish minimum performance criteria for R-1234yf refrigeration identification equipment that is intended for integration with R-1234yf recovery/recycle/recharge machines. It is intended to prevent the technician from recovering R-1234yf that is contaminated with other refrigerants, including hydrocarbons.
R-1234yf Refrigerant Identifier Installed in Recovery and Recycling Equipment for Use with Mobile A/C Systems
- ICS
- 43.040.60
- CCS
- T08
- 发布
- 2012-06-21
- 实施
- 2017-08-17
Electric mobility - Schemes of identifiers for E-Roaming - Contract ID and Electric Vehicle Supply Equipment ID; Text in English
- ICS
- 35.240.60
- CCS
- T08
- 发布
- 2011-11
- 实施
This SAE standard applies to refrigerant identification equipment to be used for identifying an acceptable level of R-1234yf purity in a refrigerant tank or vehicle MAC system labeled as containing R-1234yf, and not misidentify other refrigerants. The purpose of this SAE Standard is to establish minimum performance criteria for R-1234yf refrigeration identification equipment that is intended for integration with R-1234yf recovery/recycle/recharge machines. It is intended to prevent the technician from recovering R-1234yf that is contaminated with other refrigerants, including hydrocarbons.
R-1234yf Refrigerant Identifier Installed in Recovery and Recycling Equipment for Use with Mobile A/C Systems
- ICS
- 43.040.60
- CCS
- T08
- 发布
- 2011-02-07
- 实施
- 2011-02-09
