19.040;29.020 标准查询与下载

GB/T 2423.39-2018 环境试验 第2部分:试验方法 试验Ee和导则:散装货物试验包含弹跳

Environmental testing—Part 2：Test methods—Test Ee and guidance：Loose cargo testing including bounce

JIS C 60068-2-65:2019 环境试验 第 2-65 部分：试验 试验 Fg：振动 声致法

Environmental testing -- Part 2-65: Tests -- Test Fg: Vibration -- Acoustically induced method

JIS C 60068-2-78:2015 环境试验.第2-78部分:试验.试验Cab:潮湿、稳态试验

Environmental testing -- Part 2-78: Tests -- Test Cab: Damp heat, steady state

JIS C 60068-2-55:2014 环境试验. 第2-55部分: 试验. 试验Ee和指南. 包括弹跳的松散货物试验

Environmental testing -- Part 2-55: Tests -- Test Ee and guidance -- Loose cargo testing including bounce

LST EN 60068-2-78-2013 环境试验. 第2-78部分: 试验. 试验Cab: 恒定湿热试验 (IEC 60068-2-78-2012)

Environmental testing -- Part 2-78: Tests - Test Cab: Damp heat, steady state (IEC 60068-2-78:2012)

IEC 60068-2-65:2013 环境试验.第2-65部分:试验方法.试验Fg:声振.声诱发方法

Environmental testing - Part 2-65: Tests - Test Fg: Vibration - Acoustically induced method

IEC 60068-2-55:2013 环境试验.第2-55部分:试验.试验Ee和指南:含弹力的未包装货物试验

Environmental testing - Part 2-55: Tests - Test Ee and guidance: Loose cargo testing including bounce

GOST R 55001-2012 工业产品环境耐久性实验室性能的通用要求. 盐雾试验室 (无负载) 的认证方法

General requirements for performance of chambers for industrial products environments endurance tests. Certification methods for chambers (without load) for salt spray tests

KS C IEC 60068-2-80:2010 环境试验.第2-80部分:试验.试验Fi:振动.混合模式

이 표준은 그 성격이 복잡하고 혼합된 진동 여기가 필요한 모의 실험에 시편을 시험하는 일반

Environmental testing－Part 2-80：Tests－Test Fi：Vibration－Mixed mode

JIS C 60068-2-80:2009 环境试验.第2-80部分:试验.试验Fi:振动.混合模式

This Standard specifies the test method for mixed mode vibration. The purpose of the test is to demonstrate the adequacy of components, equipment and other products (hereafter referred to as "specimens") to resist the specified mixed mode excitation without unacceptable degradation of its functional and/or structural performance. It is particularly useful for tailoring mixed mode environments where measured data are available for the real life environment. The test also helps reveal the accumulated effects of stress induced by random vibra- tion. mixed with sine and/or random, and the resulting mechanical weakness and deg- radation in specified performances, and to use this information, in conjunction with the relevant specification, to assess the acceptability of specimens, in some cases, this Stan- dard may also be used to demonstrate the mechanical robustness of specimens. This Standard is applicable to specimens which may be subjected to vibration of a random and/or a combination of random and deterministic nature resuhing from trans- portation or real life environments, for example in aircraft, space vehicles and for items in their transportation container when the latter may be considered as part of the specimen itself'. Ahhough primarily intended for electrotechnieal specimens, this Standard is not re- stricted to such specimens and may be used in other fields where desired. NOTE : The International Standard(s) corresponding to this Standard and the symbol of degree of' contents are as follows : IEC 60068-2-80 : 2005 Environmental testiny- Part 2-80 : Tests -- Test Fi : Vibration Mixed mode (MOD) The symbols which denote the degree of correspondence in the con- tents between the relevant International Standard and ,]IS are IDT (identical). MOD (modified), and NEQ (not equivalent) according to ISO/IEC Guide 21.

Environmental testing -- Part 2-80: Tests -- Test Fi: Vibration -- Mixed mode

KS C IEC 60068-3-5:2008 环境试验.第3-5部分:配套文献和导则.温度室功能的确定

이 표준은 항온조가 무부하에서 IEC 60068-2와 기타 표준의 기후 시험 절차 요건의

Environmental testing－Part 3-5：Supporting documentation and guidance - Confirmation of the performance of temperature chambers

JIS C 60068-3-7:2008 环境试验.第3-7部分:支持文件和指南.试验A和试验B(带负荷)用温度箱内的测量

この規格は，JIS C 60068-2-1及びJIS C 60068-2-2の環境試験手順の中で要求されている諸事項に適応できる温度試験槽の確認のための，系統的，かつ，再現性のある方怯について規定する。温度試験槽の有効空間内に空気循環のある状態における発熱又は非発熱供試品を考慮したものである。

Environmental testing -- Part 3-7: Supporting documentation and guidance -- Measurements in temperature chambers for tests A and B (with load)

JIS C 60068-3-6:2008 环境试验.第3-6部分:支持文件和指南.温度/湿度箱性能确认

この規格は，JIS C 60068-2規格群の環境試験方法の中の動的試験，すなわち，衝撃試験，振動試験及び定加速度試験での機器並びにその他の製品の取付方法だけでなく，包装されている製品及び包装されていない製品の取付方法について規定する。

Environmental testing -- Part 3-6: Supporting documentation and guidance -- Confirmation of the performance of temperature/humidity chambers

JIS C 60068-3-8:2006 环境试验.第3-8部分:支持文献和指南.振动试验的选择

この規格は,JIS C 60068-2-6,JIS C 60068・2-64及びIEC 60068-2-80から試験方法を選択するための指針について規定する。

Environmental testing -- Part 3-8: Supporting documentation and guidance -- Selecting amongst vibration tests

JIS C 60068-3-5:2006 环境试验.第3-5部分:支持文件和指南.温度箱性能的确认

この規格は，負荷がない温度試験槽が，JIS C 60068-1及びほかの標準環境試験方法に規定されている耐侯性試験の要求事項に適合しているかどうかを確認するための，統一的で再現性のある手段について規定する。

Environmental testing -- Part 3-5: Supporting documentation and guidance -- Confirmation of the performance of temperature chambers

KS C IEC 60068-3-8:2005 环境试验.第3-8部分:配套文件和指南.在振动试验中的选择

이 규격은 IEC 60068-2 정상 진동 시험 방법 Fc 정현파, Fh 랜덤파 및 F(

Environmental testing－Part 3－8：Supporting documentation and guidance－Selecting amongst vibration tests

LST EN 60068-2-80-2005 环境测试 第 2-80 部分：测试 测试 Fi：振动 混合模式（IEC 60068-2-80:2005）

Environmental testing. Part 2-80: Tests. Test Fi: Vibration. Mixed mode (IEC 60068-2-80:2005)

AS 60068.2.58:2004 环境试验．试验．Td试验：可焊性，敷金属耐受性能以及表面安装设备（SMD）的焊接热耐受性能的试验方法

The AS 60068 Standards include a series of environmental testing procedures, information on the severity of tests, and information on atmospheric conditions for measurement and testing. Although primarily intended for electrotechnical products, many of t

Environmental testing - Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)

AS 60068.2.46:2004 环境试验．试验．Kd试验指南：对触头和连接进行的硫化氢试验

The AS 60068 Standards include a series of environmental testing procedures, information on the severity of tests, and information on atmospheric conditions for measurement and testing. Although primarily intended for electrotechnical products, many of t

Environmental testing - Tests - Guidance to test Kd: Hydrogen sulphide test for contacts and connections

LST EN 60068-3-8-2004 环境测试 第 3-8 部分：支持文档和指南 在振动测试中进行选择（IEC 60068-3-8:2003）

Environmental testing. Part 3-8: Supporting documentation and guidance - Selecting amongst vibration tests (IEC 60068-3-8:2003)