43.060 道路车辆内燃机 标准查询与下载



共找到 28 条与 道路车辆内燃机 相关的标准,共 2

The technical specification for remanufacturing of automotive components—Spark and compression ignition engines

ICS
43.060
CCS
T10
发布
2017-10-14
实施
2018-05-01 00:00:00.0

本标准规定了齿轮齿条式、循环球式机械和液压助力转向器再制造术语和定义,拆解、分类与清洗,检修与修复,总成装配要求,性能要求和试验方法,检验规则,标识与包装等 。 本标准适用于齿轮齿条式、循环球式机械和液压助力转向器的再制造。 本标准不适用于电液伺服转向器和电子转向器。 本标准不适用于发生过火灾或碰撞事故的转向器。

The technical specifications for remanufacturing of automotive components.Steering gear

ICS
43.060
CCS
T10
发布
2012-09-03
实施
2013-01-01

本标准规定了架装直列式喷油泵的尺寸要求。

Motor vehicles cradle-mounted in-line fuel injection pumps for diesel engimes--Mounting dimensions

ICS
43.060
CCS
T13
发布
1996-10-17
实施
1999-04-01

本标准规定了摩托车和轻便摩托车用汽油发动机在台架上进行性能试验、可靠性试验和耐久性试验的方法。 本标准适用于摩托车和轻便摩托车用往复活塞式汽油发动机(以下简称发动机)的台架试验。

Method of bed test of gasoline engine for motorcycles and mopeds

ICS
43.060
CCS
T80
发布
1995-11-16
实施
1996-05-01

Method of defining the nominal power for diesel locomotives

ICS
43.060
CCS
S42
发布
1982-12-24
实施
1983-10-01

1.1. This Regulation applies to the representation of the curve as a function of engine or motor speed of the power at full load indicated by the manufacturer for internal combustion engines or electric drive trains and the maximum 30 minutes power of electric drive trains intended for the propulsion of motor vehicles of categories M and N 1 . 1.2. The internal combustion engines belong to one of the following categories: Reciprocating piston engines (positive-ignition or compression-ignition), but excluding free piston engines; Rotary piston engines (positive-ignition or compression ignition); Naturally aspirated or supercharged engines. 1.3. The electric drive trains are composed of controllers and motors and are used for propulsion of vehicles as the sole mode of propulsion.

Uniform provisions concerning the approval of internal combustion engines or electric drive trains intended for the propulsion of motor vehicles of categories M and N with regard to the measurement of the net power and the maximum 30 minutes power of e...

ICS
43.060
CCS
发布
2021-07-01
实施

Methanol fuel engine technical conditions

ICS
43.060
CCS
T47
发布
2021-03-05
实施
2021-07-01

Internal combustion engine industrial filter paper

ICS
43.060
CCS
T05
发布
2020-08-31
实施
2021-01-01

Low-speed vehicle power performance requirements and test methods

ICS
43.060
CCS
T54
发布
2017-04-12
实施
2018-01-01

General technical requirements for low-speed vehicle hydraulic dump systems

ICS
43.060
CCS
T54
发布
2017-04-12
实施
2018-01-01

Test method for fatigue strength of low-speed automobile brakes

ICS
43.060
CCS
T54
发布
2017-04-12
实施
2018-01-01

Test method for fatigue strength of chains used in three-wheel vehicles

ICS
43.060
CCS
T54
发布
2017-04-12
实施
2018-01-01

本标准规定了汽车发动机进、排气门技术要求、检验方法、检验规则、标识、包装、运输及贮存。 本标准适用于往复活塞式汽车发动机气门。

Automobile engine valve specification

ICS
43.060
CCS
T13
发布
2016-04-05
实施
2016-09-01

本标准规定了汽车发动机用蜡式调温器(以下简称调温器)的技术要求、试验方法、检验规则以及包装、标志、运输与储存要求。本标准适用于汽车发动机用调温器,其他用途的发动机用调温器也可参照使用。

Engineering specification for auto engine wax thermostat

ICS
43.060
CCS
T10
发布
2013-04-25
实施
2013-09-01

本标准规定了三轮汽车和低速货车型式检验的项目、检验要求和检验方法。本标准适用于三轮汽车和低速货车新产品、重大改进型与变型产品的型式检验。

Tri-wheel vehicles and low-speed goods vehicles.Rules for type inspection

ICS
43.060
CCS
T43;T54
发布
2013-04-25
实施
2013-09-01

本标准规定了轻型汽车中小功率柴油发动机的技术要求、试验方法、检验规则、标识、包装、运输、贮存等要求。本标准适用于功率为300 kW及以下所有轻型汽车中小功率柴油发动机(以下简称“柴油发动机”)。

Small and medium power diesel engines for light vehicles

ICS
43.060
CCS
T10
发布
2012/10/15
实施
2012/10/15

本标准规定了汽车用天然气单燃料发动机(包括压缩天然气及不带液态喷射的液化天然气发动机)的技术要求、试验方法、检验规则、标志、包装、运输、储存。 本标准适用于压缩天然气储气瓶公称压力不大于20MPa和液化天然气的储气瓶公称工作压力不大于1.6MPa的汽车用单燃料发动机。

Technical specification of single-fuel natural gas vehicle engine

ICS
43.060
CCS
T47
发布
2011-05-18
实施
2011-08-01

本标准规定了汽车用汽油/天然气两用燃料发动机的技术要求、试验方法、检验规则、标志、包装、运输、储存。 本标准适用于压缩天然气储气瓶公称工作压力不大于20MPa的汽车用汽油/天然气两用燃料发动机。

Technical specification of gasoline/NG bi-fuel engine

ICS
43.060
CCS
T47
发布
2011-05-18
实施
2011-08-01

本标准规定了车用液化石油气发动机的技术要求、试验方法、检验规则、标志、包装、运输、储存。 本标准适用于车用汽油/液化石油气两用燃料发动机和液化石油气单燃料发动机。

Technical specification of liquefied petroleum gas engine

ICS
43.060
CCS
T47
发布
2011-05-18
实施
2011-08-01

本标准规定了汽车用小排量汽油发动机的技术要求、试验方法、检验规则、标识、包装、运输、贮存等要求。本标准适用于排量1.6升及以下的汽车用小排量汽油发动机(以下简称汽油发动机)。

Small displacement gasoline engine for automobile

ICS
43.060
CCS
T10
发布
2010/10/10
实施
2010/10/10



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号