Application: 用途 - Hardening furnaces are used especially for hardening, annealing and preheating of a metal charge before armouring, under oxidizing atmosphere. The furnaces with semi-gastight version with retort (see. the datasheet the semi- gastight version of the furnaces), can be used for the heat treatment of the charge below a partially shielding gas. In glass industry they can be used for preheating of moulds.
- 淬火炉是专门为在氧化气氛中淬火、退火和预热而设计。半密封的炉子可以在部分保护气体下运行,在玻璃工业,淬火炉可以对模具进行预热。
Description of the construction of the furnace: 主要结构描述 - frame construction covered with metal plate,
- 框架结构,固定独立的箱体
- loading sill of furnace 900 mm
- 装载台面离地面为900mm
- furnace insulated with light-weight bricks
- 炉子用轻质砖保温
- heating spirals on ceramic tubes on the side walls and in grooves at furnace bottom
- 炉子采用5面加热系统,电热丝被缠绕在陶瓷管上,并被安装在各个部位
- door equipped with safety terminal switch
- 门上设有安全开关终端
- electrical installation on back side of furnace
- 电力装置被安装在炉子的背面
- controller INDUSTRY allows saving of 30 control programs in the internal controller memory, each program can consist of up to 15 steps, operator may start the select program on a preset date and time thanks to the installed real time clock.
- 控制器可以储存30个程序,每个程序zei多可以设置15个步骤,时钟功能,定时开关。该控制器可以满足任何复杂工艺
- switchboard on side of furnace
- 控制板在炉子的侧面
- termocouple type S
- S型热电偶
- semiconductor non-contact switch relay
- 半导体无触点开关继电器
Standard equipment of the furnace covers: 标准设备包括 - turning table for charge (for PK 105 PK 520)
- 转向架/台(适用于PK105-PK520)
- door opening downwards or upwards
- 向下或向上开门
- PID programable controler INDUSTRY
- INDUSTRY控制器
- Stand
- 架子
Like an accessories as an extra we are bidding: 可选附件 - semi-gastight design of furnace
- 气氛保护套件
- metal plate on furnace bottom
- 陶瓷保护板
- interface R 232/485,
- R 232/485连接端口
- software for the monitoring and the record of the temperature cycle,
- 温度循环记录软件
- graphic recorder of temperature cycle,
- 温度循环图解记录器
Benefits: 优点 - attractive design,
- 设计独特
- top insulating materials (low power consumption, possibility of the fast start on the asked temperature),
- 顶级的绝缘材料(耗电量底,可在要求的温度下迅速启动)
- independent limit unit protected furnace against destroyed,
- 独立限制单位,避免电炉的不良使用
- furnace cooling by running air by use ventilators,
- 炉内冷却通电子风扇降温,降温平稳
- programmable temperature adjustment with the high accuracy,
- 高精度可编程温度调节系统
- solid state relay (more fluent and silent running, the minimum disturbance of the surrounding mechanism),
- 固态继电器(较流畅和安静运行,因此对周围设施产生的震动极小)
- perfect workshop processing, the hardware and safety in service.
- 完美的生产工艺,硬件和安全服务
类型 | zei高温度 | 体积 | 外部尺寸 (宽高深) | 内部尺寸 (宽高深) | 输入 | 重量 | 电压 |
LAC | °C | L | mm | mm | kW | kg | V |
PK 16/12 | 1280 | 10 | 700x700x790 | 230x200x350 | 3 | 60 | 230 |
PK 16/12R | 1280 | 10 | 700x700x790 | 230x200x350 | 5,5 | 70 | 230 |
PK 17/12 | 1280 | 17 | 720x700x790 | 250x200x350 | 3,5 | 80 | 230 |
PK 17/12R | 1280 | 17 | 1050x1430x1700 | 250x200x350 | 7,25 | 230 | 380 |
PK 25/12 | 1280 | 25 | 1050x1440x1700 | 250x250x400 | 11 | 250 | 380 |
PK 40/12 | 1280 | 40 | 1100x1440x1900 | 290x250x550 | 11 | 320 | 380 |
PK 55/12 | 1280 | 55 | 1180x1440x1900 | 400x250x550 | 13 | 450 | 380 |
淬火炉PK信息由济南精密科学仪器仪表有限公司为您提供,如您想了解更多关于淬火炉PK报价、型号、参数等信息,欢迎来电或留言咨询。
注:该产品未在中华人民共和国食品药品监督管理部门申请医疗器械注册和备案,不可用于临床诊断或治疗等相关用途