自动软化点测试仪
ASP-5


ASP-5 automates the softening point test by Ring-and-Ball method for bitumen and similar substances, prescribed in ASTM D36.
ASP-5自动软化点测试仪是应用“环球法”测试沥青软化点的专用仪器，也可以测试其他产品的软化点，适用于ASTM D36 GB/T4507 “石油沥青软化点试验方法” (环球法)标准

A photo-electric device with wide light beam is employed to assure a reliable automatic detection of softening point. 特有的点阵式光电检测系统，检测准确，结果可靠。

EASY OPERATION: Just set up the specimen, determine the bath liquid type， and press the START key; all the rest of the test procedures such as heating, softening point detection, and heater cooling are performed automatically.
将试样装入仪器后，只需要简单设定试验参数，按下启动键，仪器便会按标准规定自动升温，当达到软化点温度时，仪器自动检测该点温度，并自动显示该点温度，同时停止加热和报警通知试验结束。

EXACT TEMPERATURE RISE CONTROL: Exact temperature rise rate can be attained not only with water bath but also with glycerin bath by the precise heater control.
在不同的试验条件要求下ASP-5可使用水浴或油浴，配合多介质控温程序，可精确控制试样温度。

RELIABLE FALLING BALL DETECTION: Thanks to the wide light projector and wide light receiver, the ASP-5 detects the falling ball even if the ball falls with some angle.
特殊的光电检测设计，避免因测试球落下角度不同可能引起的误差。测试结果与手动试验结果相比，有良好的再现性,并且精度更高。

SAFETY MECHANISM: Generation of harmful vapor from overheated glycerin is prevented by the safety shutdown.控温精确，过热保护，自动关机，有效避免加热甘油时产生有毒气体。

CALIBRATION CAPABILITY: By simply setting a traceable thermometer right next to the PT-100 temperature sensor and running a test to record and compare the two temperature readings, user can easily carry out a traceable temperature calibration. 仪器使用过程中可应用标准的试验温度计对温度传感器进行矫正，全过程非常简单，无须过多培训，另：仪器出厂时全部调整完毕，通常无需再调整

DATA HANDLING: The unit is equipped to store up to 20 successive test results and export to an optional printer or to a LIMS through an RS232 port. 仪器可记录zei后20 次的试验数据，内置电池，即使关机数据也不会丢失。还可以通过RS-232外接打印机输出，或同实验室信息管理系统（LIMS）通讯，便于集中控制管理。

COMPACT DESIGN: The test head unit can be stacked on the control unit and is also small enough (only 23cm in width) to be operated inside of a fume hood. 仪器需放置于通风橱内，而测试部与控制部组合放置，占地很小(整体宽23cm )。




TANAKA Automated Softening Point Tester, model ASP-5
SPECIFICATIONS:
CONFORMING STANDARDS: （适用标准）
ASTM D36 GB/T4507etc.

TYPE:
Two-Rings & Two-Balls type （环球法，双样品）

MEASURING RANGE: 90（测试范围）
Ambient to 200oC (392 oF) 室温到200℃（392

ASP-5自动软化点试验仪信息由上海旭风科学仪器有限公司为您提供，如您想了解更多关于ASP-5自动软化点试验仪报价、型号、参数等信息，欢迎来电或留言咨询。

注：该产品未在中华人民共和国食品药品监督管理部门申请医疗器械注册和备案，不可用于临床诊断或治疗等相关用途