400-6699-117转1000
您好,欢迎您查看分析测试百科网,请问有什么帮助您的?
诚信认证:
工商注册信息已核实!参考报价: | 面议 | 型号: | BR-PV-GDJS系列 |
品牌: | 暂无 | 产地: | 暂无 |
关注度: | 49 | 信息完整度: | |
样本: | 典型用户: | 暂无 |
400-6699-117转1000
★ 技术参数
☆ 温度范围:
A型:-20℃~+100℃(+150℃)
B型:-40℃~+100℃(+150℃)
C型:-60℃~+100℃(+150℃)
D型:-70℃~+100℃(+150℃)
☆ 温度波动度:±0.5℃
☆ 温度均匀度:±2.0℃
☆ 湿度范围:30%~98%R.H
☆ 湿度误差:+2/-3%R.H
★ 型号及工作室尺寸(D×W×H)(mm)
GDJ-100 400×450×550
GDJ-150 500×500×600
GDJ-225 500×600×750
GDJ-400 600×800×850
GDJ-800 800×1000×1000
GDJ-1000 1000×1000×1000
GDJ-1500 1500×1000×1000
BR-PV-THD Thermal Cycling, Humidity-Freeze, Damp-Heat Tester
Thermal Cycling Test
Implementation of standards: IEC 61215:2005 & Ed.3, IEC 61646:2008 “TC200 thermal cycling test, TC50 thermal cycling test”, and UL 1703-2008 “temperature cycling test”.
1. IEC 61215 Ed.3, IEC 61646:2008 test condition:
The temperature of modules between -40°C±2°C and +85°C±2°C cycling, the rate of change of temperature between the low and high extremes shall not exceed 100°C/h and the module temperature shall remain stable at each extreme for a period of at least 10 min. The cycle time shall not exceed 6h.
2. UL 1703-2008 test condition:
The temperature of modules between -40°C±2°C and +90°C±2°C cycling, the instantaneous rate of temperature change of the test chamber with respect to time is not to be greater than 120°C/h.
Humidity-Freeze Test
Implementation of standards:
IEC 61215 Ed.3, IEC 61646:2008 “humidity-freeze”, UL 1703-2008 “humidity test”
The temperature of modules between -40°C±2°C and +85°C±2°C cycling.
Relative humidity 85%RH±5% at 85°C in IEC 61215 and 61646, but UL 1703 Control in 85%RH±2.5% at 85°C, allowable deviation range different.
Damp-Heat Test
Implementation of standards: IEC 61215:2005 & Ed.3, IEC 61646:2008 “damp-heat test”
Test temperature 85°C ± 2°C, Relative humidity 85% ± 5%, Test duration 1000h
Electrical continuity, Insulation continuity, Grounding continuity test system:
Implementation of standards: IEC 61215:2005 & Ed.3, IEC 61646:2008 “electrical continuity for TC200 thermal cycling test and humidity-freeze test” condition, and UL 1703-2008 “Insulation continuity and grounding continuity” condition.
DC power current / voltage output: ≥10A / 50V
Module type | Imp | TC 200 Thermal Cycling | Humidity-Freeze |
1.58×0.808m monocrystalline | 5.20A | Provide Im over 25°C Provide 0.1~0.5A below 25°C | Provide current during the whole test |
2×1m polycrystalline | 7.66A | Provide Im over 25°C Provide 0.1~0.5A below 25°C | Provide current during the whole test |
1.4×1.1m Thin-film | 1.66A | Provide current during the whole test | Provide current during the whole test |
2.6×2.2m Thin-film | 2.66A | Provide current during the whole test | Provide current during the whole test |
热循环-湿热-湿冻试验机信息由上海泊睿科学仪器有限公司为您提供,如您想了解更多关于热循环-湿热-湿冻试验机报价、型号、参数等信息,欢迎来电或留言咨询。
注:该产品未在中华人民共和国食品药品监督管理部门申请医疗器械注册和备案,不可用于临床诊断或治疗等相关用途